So are you

Congo bro on 10 mil

@@DyslexicMitochondria hey bro i watch your videos. Love your channel

We want to see you using it in your videos 😁

I love you Arun! More collabs please, you are such a lovely and amazing individual, it is great to see you collab with other youtubers.

hello AntVenom

I did not expect to see you here lol Love your channel

Oh no, he forgor to end the quote D: Also, hello Mr Minecraft man.

How did my childhood wind up in this comments section Haven’t played minecraft in a few years but I loved your videos when I did; your ant farm survival series still brings back memories for me. Thanks for everything you’ve made

@@ChristopherChapelle That was the series I remember him for. Haven't watched him since. It's fun to see him comment on videos in my subscription feed from time to time though

Not me

@@ultimategamer4703 maybe next time kiddo *pats back*

Yeah! They all did very well!🌟

I thought the same, absurd genius

I love coding but this man did it … wow

his channel : www.youtube.com/@LiteLotus/featured

doesn't PLA loose it's spring over time if put into compression though?

@@BEdmonson85 even still, and even if phones get too thin for the current clips..... More can be printed and I'm sure he gave him spares. This is an awesome project

@@BEdmonson85 all plastics will if the temperature is high enough, but unlikely for that indoor use case.

@@BEdmonson85 Right...it's a matter of time and temp.. It's called PLASTIC CREEP...PLA suffers a lot..

4:37 yeah everyone thinks I know how to program but its all about stack overfow

no one can write code without stackoverflow. I still don't know where the contributors to stackoverflow get their answers from.

@@real_dddf it’s the eighth wonder of the world

@@real_dddf It's stackoverflow all the way down

If StackOverflow isn't open, I'm not coding lmao

Cool tip man.

Thank you for saying it. So many content creators have started using CNC routers w/ little knowledge of how to properly implement tool usage. Always use a rough end mill first and clean-up to the final dimensions w/ a finish bit. Running around all the edges w/ a chamfer or round-over would've been a nice touch, too.

Doubt he'd want to work in a company. He's too creative, being a worker would hinder him. Either he starts his own company making custom-made whatever tf customers want, or he stays solo making what HE wants!

He does what he wants and it helps humanity - nothing better than that

Im sorry but if you were an executive in an engineering company you wouldnt be so hyped about this. This channels projects are nice, but none of this is particularly hard or undoable for a professional engineer. All the people here are getting ultra hyped even tho most of it is rather basic engineering work. Just look at his last video, this camera lens thing, some guys in the comments are right now loosing their minds on the "precision" and "build quality" altought its made of 3D printed parts and aluminum profiles. This is just because 95% of the viewers are complete outsiders to engineering or any kind of metallwork or electronics so the stuff he builds looks like black magic, to someone actually working in industry its possibly entertaining but not very exciting to be honest.

@@advancedmicrosystems4658 Can agree even though I been studying engineering for 2 years this is basic stuff

He definitely wouldn't agree on that

he did that to make it one big peel instead of multiple small ones, not sure if it was for fingerprints or not but still smart haha

OMG you are right wtf?!!

All plastic sheeting comes with protective film installed from the factory. Only a moron would remove it prior to project completion.🤣🤣🤣

@@manicmic7114 he means fingerprints getting on it from trying to stick your finger under the film and smudge it just a tiny bit. not from removing it before completion

He has had experiences

More than epic

this absolutely came out of nowhere, and it's so good

@@hoodio ikr....

It's not a dress show mate. 'cross over'...

@@SikhSoldier2010 You must be fun at parties ;)

That would actually be pretty easy to implement!

A “Dont tell me you expect less from me” vibe

Yup, love it😜

Funny how most of us are subscribed to the same channels.

Shud up

1000%

Yeah

Yo hey man

I'd also guess that Mrwhosetheboss would have paid for part of or all the material costs since he'll get to use it. I'm so glad this Collab happened!

Yes sir, this was a great video and really would like to see more like it. First video I watched on this man's channel and yeah...I'm hooked.

Thought the same lmao

@@daryaavery999 iiiï8

Love that he waited to drop the pun-bomb for the end

I really wish Lamar has a UKposts channel

Waiting for a new blue bird

@@Daniel-hg2rq A. amazing that you spelled my name right first go 👀👀, B. hi :P

How do you know how to spell my name?! also thanks love your vids, single bladed helicopter blew my mind.

Yeah and he solved it like an engineer...that guy just needs to sell all these phones.

@@Y1001 doesn’t need too, dudes already a millionaire. In hundreds of years to come those phones will probably be worth more than his net worth lmao

@@limitlessunknown8676 lmao...those phones are already worth only 30-50% of their original price, what makes you think they will be worth more someday 😂

@@dimitrijekrstic7567 I said Hundreds of years didn’t I? In those times these types of phones are really rare which means they’ll go up in value. Seriously how much do you think a iPhone X will cost in 2200? or even 3000. Anything that’s not attainable anymore will increase in value and it’s embarrassing that you don’t even know that.

@@limitlessunknown8676 eh, he could just sell them to remove clutter and not for money

Did not expect you here, Dr. Miller

not as m ind blowing as his phone collection

lol

Sup dr miller

ikr?

I watch his videos sometimes just because the voice, its relaxing

Up vote.. I'd totally sub that.

I remember trying to mount some full-perimeter shelving in a foyer once... real life is not square, not plumb, and not flat either.

Recently I started 3D scanning rooms and large objects with the IPad pro lidar and it was been actually wonderful for accounting for imperfections!

Yep. I found the hard way that basically no corner in my house is 90 degrees.

@@tinchote same! Lol

You need to find a house in Germany or other country with good building teams and quickly adopted new technologies of constructing building.

👀 Jeff can smell that Raspberry Pi from oceans away.

its actually a Pi 3b, not the + variant, idk how Matt got a hold of one. i love your videos man :D

i wonder why they dont use arduino instead?

@@Chris-rs1pp can’t run a web server on an Arduino

@@Chris-rs1pp Raspberry pi is used for storing the phone’s position in a database

@NubBear If you read again, you'll understand that he meant "we didn't know that we needed it".

@NubBear fair enough

We certainly didn't deserve it, that's for sure - I mean, what have we done to him that was that bad?

Came here to say the same

Linus would literally overheat

With the amount of things linus has dropped, matt might engineer an anti-dropping device for him.

@@nhojlagap6222 LMAOOOO 😂😂😂

I think one or both have mentioned being interested in a collaboration, but they haven't been able to make it work yet.

Funny thing is mrwhostheboss does those puns in almost all of his videos too ahaha

thanks man, you spelt my name right first go, finding a lot of you doing that and its blowing my mind tbh...

@@LiteLotusyo you should be getting more likes

Yeah that was smart

it didnt work on one of the shelves :D

Now that would be an AWESOME collab!

YES!

the commercial version would never be as good due to costs however it would be cool

For a shop it could be quite nice if you make it look less nice, but instead put RFID's in the price labels and automatically have the database update based on that so you know what's in stock, what's been taken out and where it is without manually having to update anything.

My second reaction too 😅

Or air blower on the regular

My thoughts, exactly... specially when considering I live in a Caribbean island where keeping shelves 100% dust-free is nearly impossible unless you wipe them clean every other day. Now imagine having to remove ALL the smartphones and dusting EACH AND EVERY groove on this beautiful monstrosity... glass doors are a must

Dust-off tools. Easy peasy.

might even be able to pull some of the genre info from existing databases.

What if the phones have their batteries removed? >:P

@@LordDragox412 Very few phones let you remove the batteries these days - been like it for 4 or 5 years.

@@barrieshepherd7694 Oh, yeah. True. I completely forgot about that part, since I have a 10 year old Sony phone that still works like a charm and never even thought about the need to replace the battery as it's still holding it's charge really well.

same man

Well, it stands to reason that Arun will keep on collecting phones... :)

@@isaacmadhavan oh I know, but the engineering to accommodate that is impressive

@@Arissiah The impressive part is the basic engineering of getting that compact comma-shaped clip which enabled accommodating more phones per unit length. The rest is just expansion; more length = more phones.

@@isaacmadhavan Yes. You've repeated what I said in a more exact way.

Yes

Lol

You are iitian?

Just a joke. It has been years since I even opened stack overflow 😂

I think that'd be awesome as well! One thing tho that I think will important to factor in os that Marques lives in the US, not the UK or near. Anyway, it will be incredible if they can pull that off!

@@rafaelbordignon271 I know... If Matt ever decides to go on vacation in the US though... 👀🤞

To be fair, it would be simple to locate phones even without the lighting system. It's the database that really matters, as the shelf number and number across could be displayed onscreen & physically labelled.

Well, How would you access it then? there is not enough room for a 90° turn door, and honestly, making it a moving door system would ruin the aesthetic design

just hire a maid to do the vacuuming every once a week

@@Feelix420 Think smarter, not harder! Brilliant

@@FunBoysGaming lol the irony on this comment and the op's nickname 🤣

Clear plexi glass?

Why do people like leds on everything 😭 nothing drives me nuts like led lights. Worse when they pulsate I feel like dying.

@@penofinspiration Not everyone likes LEDs, I like pleasant warmer colors or static single color

@@csmckzhvn Every streamer or blogger video that i come across, there is always fairy lights on the wall or pc monitors. Christmas time is the worst time for me to be alive😭

@@penofinspiration well in this particular case they used LEDs practically. Also they didn't have any other choice than LEDs, cuz the shelf should show the phone's place. Also, epilepsy?

@@user-bc1qq7ux4s thanks mate for pointing that out. Btw, if you guys don't like RGB LEDs (pulse or not), why watch DiY Perks?

That is a big difference in weight and who has 600 laptops to store out of their box ?