Surveillance Car using ESP32 Cam module | ESP32 Camera wi-fi car 🚓

  Переглядів 220,221

hash include electronics

hash include electronics

День тому

In this video we are going to make camera surveillance car 🚓 using esp32 cam module.
We will capture images using camera present on the car and send these images to our mobile phone using WebSocket through wi-fi connection.
We will also control the car with our own improved mobile app.
I have explained in details each step along with code.
👉Please subscribe: ukposts.info...
👉Components list:
✅ 4WD Car kit (It has 4 motors, 4 wheels, and connectors) (Canada amzn.to/3i1PdDW) (India amzn.to/3t1WcCc)
✅ ESP32 Cam module (Canada amzn.to/3t62LED) (India amzn.to/3UIyib1)
✅ L298N motor driver module (Canada amzn.to/3J98zTJ) (India amzn.to/3hfLIwJ)
✅ 7-12 V DC Battery (in our case lipo 3s battery) amzn.to/37gJWpQ
✅ Breadboard (Canada amzn.to/3KH7sL6) (India amzn.to/3sXgZqC)
✅ Arduino Uno (for uploading code) (Canada amzn.to/3JpiGE5) (India amzn.to/3E0VefL)
✅ Double sided tape
✅ Glue gun
✅ Jumper wires (Canada amzn.to/3I8fZVG) (India amzn.to/3heE3Pa)
👉 Shorts Channel :
/ ujwalnandanwar
👉Code and diagram:
github.com/un0038998/CameraCar
👉ESP32 board URL:
dl.espressif.com/dl/package_e...
👉AsyncTCP Library:
github.com/me-no-dev/AsyncTCP...
👉ESPAsyncWebServer Library:
github.com/me-no-dev/ESPAsync...
👉Wi-Fi Car
• Smartphone controlled ...
👉Hand Gesture controlled car
• Hand Gesture Controlle...
👉Bluetooth car
• How to make Bluetooth ...
👉Obstacle avoiding car
• Arduino Obstacle Avoid...
👉Arduino RC car using nrf24l01+ module
• Arduino RC car using N...
👉Watch more videos:
/ hashincludeelectronics
👉Follow us on Instagram:
/ hashincludeelectronics
⏱Chapters
00:00 Intro
01:00 Components
01:34 Car Assembly
03:38 Code Explanation
07:01 Code upload (Using Arduino Uno)
08:14 Mobile App
08:48 Car Demo
12:19 Important Points
#esp32cam #surveillancecar #hashincludeelectronics

КОМЕНТАРІ: 1 100
@yashasvichoubey9179
@yashasvichoubey9179 2 роки тому
Innovative idea and perfect presentation.👏🏻👍🏻
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you 👍🏻
@the_a_ma_n._1104
@the_a_ma_n._1104 2 роки тому
It's really amazing project thank for this.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you 👍🏻
@RakibHossain-mq7qv
@RakibHossain-mq7qv 2 роки тому
Especial Thanks for explaining the code. I'm subscribing for it.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you very much 👍🏻
@AR-Mok-cr2hq
@AR-Mok-cr2hq 7 місяців тому
Thank you friend your video is very Helper
@hashincludeelectronics
@hashincludeelectronics 7 місяців тому
Thanks for checking out the video 👍🏻👏🏻
@fabriziolongo83
@fabriziolongo83 Рік тому
Great project. Is it possible to add a label with a sensor value on a web page? If yes....how I can do it?
@pradyumnpandey4859
@pradyumnpandey4859 2 роки тому
Hello, nice video, I also watched your pan tilt video, can you please combine both of these, like fitting the pan tilt on this car and using both
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out video and your comments 👍 Combining these both would be very interesting idea. Will see if I can do that in near future. Or you can try yourself and let us know how it goes.
@agungliem1219
@agungliem1219 2 роки тому
@@hashincludeelectronics Hi, I will try to combine this project with Pan-Tilt Project. Could you please assist me with the pin arrangement? Since both of the projects use the same pin 12 - 15.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
@@agungliem1219 that’s great . Yeah I would help you on this . You can try using gpio1 and gpio3 which are uart pins VRX and VTX. We are not using serial communication so these pins should be good . Use these pins for 2 servos . Do not use gpio16 pin with camera.
@agungliem1219
@agungliem1219 2 роки тому
@@hashincludeelectronics Thank you, I will try this.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
@@agungliem1219 sounds good . All the best and let me know if you face any issue 👍🏻
@alexfernandesportrai
@alexfernandesportrai Рік тому
Super project! worked like a charm for me. I have also tried the earlier pan tilt servo project.Thanks a lot.
@hashincludeelectronics
@hashincludeelectronics Рік тому
Awesome 👏🏻
@parithosh8069
@parithosh8069 Рік тому
Did your website load?
@shadowfighter7085
@shadowfighter7085 Рік тому
​for me alao the website is not loading
@shadowfighter7085
@shadowfighter7085 Рік тому
​@@parithosh8069And if i connect mywifi car ssid then how i will load the ip on chrome without internet
@alexfernandesportrai
@alexfernandesportrai Рік тому
@@shadowfighter7085 can you connect to My-wifi car network ?
@user-ny7hu4xz3x
@user-ny7hu4xz3x 2 роки тому
As you helped, I changed it to a 12v battery and ran it, and it worked normally. It must have been difficult to answer due to the time difference, but thank you for kindly answering until the end.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
This is awesome news 👏🏻👏🏻 good power supply always sorts out most of the problems . I am glad that I could help you 🙂cheers 👍🏻
@user-ny7hu4xz3x
@user-ny7hu4xz3x 2 роки тому
@@hashincludeelectronics Once again, thank you for your kind help.
@syedhassanuddin7581
@syedhassanuddin7581 5 місяців тому
​@@user-ny7hu4xz3xhey there may i know what was ur problem? Can we connect i have to submit this as a project in my college if u can assist me with this please provide ur Instagram handle or so?
@darcynog
@darcynog 2 роки тому
Thanks for the great and very detailed project. Followed it literally and worked in the first attempt (my granddaughter thinks I am a genius!). However, when using the robot, sometimes the image freezes on the screen of the cell phone. Is there a probable cause for it and a way to fix the freeze?
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
I am glad that you liked the video and it worked 🙂👍🏻. Not sure if you already changed one setting as suggested in video . We need to set something like MAX_QUEUE_MESSAGES to 1 in the websocket library. I have described in the video . Please set it and re upload the code if not done previously. That should solve the problem .
@darcynog
@darcynog 2 роки тому
I am impressed that you answer all questions promptly. Thank you very much.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
@@darcynog thank you very much for kind words 🙂👍🏻
@Random.449
@Random.449 Рік тому
Hey you got any alternative for Esp32 Camera module ?
@shashankj.r7721
@shashankj.r7721 2 роки тому
#hashincludeelectronics Thanks For This Detailed Project Sir.. It Worked in The First Attempt. Code Explanation were Awesome. Pin Diagrams Helped a Lot. Thanks a Lot Sir.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Awesome and well done 👍🏻
@chethakajayasinghe1391
@chethakajayasinghe1391 8 місяців тому
Nice... It's working perfectly ❤
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
Thank you very much 👍🏻👏🏻
@TANAGGAMING
@TANAGGAMING 22 дні тому
hi bro mera work nhi kr raha can you help ?
@KingNOOK
@KingNOOK Рік тому
Hey man, love your video. Is it possible to adjust the code so the car has an auto pilot mode to avoid obstacles once you've determined a path for it
@hashincludeelectronics
@hashincludeelectronics Рік тому
Thanks for checking out the video and your comment. This project will be quite complicated. Will try to do this in coming days.
@KingNOOK
@KingNOOK Рік тому
@@hashincludeelectronics Thank you so much, this is much appreciated
@samarthkashyaphs9279
@samarthkashyaphs9279 3 місяці тому
In the wifi and password space in the code should we enter the wifi and password credentials of which the system is connected or does the esp 32 cam module has it's own wifi?
@samarthkashyaphs9279
@samarthkashyaphs9279 3 місяці тому
const char* ssid = "MyWiFiCar"; const char* password = "12345678"; These lines in the code are these the credentials of the wifi signal produce by the esp 32 cam module or are these the credentials of an existing wifi network
@hashincludeelectronics
@hashincludeelectronics 3 місяці тому
Please keep it as it is. Esp32 cam will create a wifi network with these credentials. You need to connect to this ssid and password 👍🏻👏🏻
@samarthkashyaphs9279
@samarthkashyaphs9279 3 місяці тому
The code is getting uploaded properly But when I apply the voltage the four motor start moving And I'm not getting the wifi signal what might be the reason
@hashincludeelectronics
@hashincludeelectronics 3 місяці тому
@@samarthkashyaphs9279 check for loose or wrong connections 👍🏻👏🏻
@user-en4xz3yo8e
@user-en4xz3yo8e 8 місяців тому
GREAT VIDEO
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
Thank you very much for checking out the video 👍🏻👏🏻
@user-en4xz3yo8e
@user-en4xz3yo8e 8 місяців тому
GERMAN EMPIRE WILL MAKE THIS TECHNOLOGY NOW >:)@@hashincludeelectronics
@AjaySingh-to4wb
@AjaySingh-to4wb 4 місяці тому
Thanks a lot , Great Explanation
@hashincludeelectronics
@hashincludeelectronics 4 місяці тому
Thank you very much 👍🏻👏🏻
@petr6067
@petr6067 2 роки тому
Just that I don't understand it when I didn't make any changes there :-( Editing the code won't be a problem, but unfortunately I have no idea where to rewrite it.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
In that case you need to learn little bit of coding . It’s not that difficult . Give it a try 👍🏻
@NilukaKurera-zn3sg
@NilukaKurera-zn3sg 11 місяців тому
Mata code eka එවැන්නකි
@theroboticzone
@theroboticzone 2 роки тому
I Have Tried to make this same project for a long time.... But it didn't Work... But your video is pretty better than the others (Explaining is Nice)... I should try it again... How do i get the app after making the car please can I Know ???
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you very much for checking out video and your kind words 👍🏻. Regarding app , once you upload the code and restart the esp32cam, connect to wifi on mobile using MyWiFiCar ssid and password as 12345678. Then type 192.168.4.1 in your mobile browser like google chrome . It should open the app . Let me know if you face any issue . I have explained this in video as well .
@theroboticzone
@theroboticzone 2 роки тому
@@hashincludeelectronics Thanks Very Much
@mrlijine
@mrlijine 2 роки тому
Awesome Ujwal !!
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you 👍🏻
@RayanFF-se2gg
@RayanFF-se2gg 4 місяці тому
I loved it ❤
@saksham-6206
@saksham-6206 6 місяців тому
Hii I am facing a problem in the project when i am uploading the code the code uploads but after when i connect ESP32 to car the car moves normally like when we connect battery to a motor the tyres are moving continuosly and also the wifi name is not showing CAN YOU PLS HELP ME OUT😢😢😢😢
@saksham-6206
@saksham-6206 6 місяців тому
Pls help me out
@hashincludeelectronics
@hashincludeelectronics 5 місяців тому
Please check the video for any missing step . 👍🏻👏🏻
@saksham-6206
@saksham-6206 5 місяців тому
@@hashincludeelectronics I have checked the video many times And I have not missed any steps can you pls tell me what's the mistake
@psykopat81
@psykopat81 2 місяці тому
​@@saksham-62061- power issue 2-wrong connection (either on code or on cables)
@rggaming537
@rggaming537 8 днів тому
my car is not giving me any wifi signal to connect what should i do
@hashincludeelectronics
@hashincludeelectronics 8 днів тому
Please make sure you are using rechargeable battery 👍🏻👏🏻
@prabhatverma7538
@prabhatverma7538 2 роки тому
This is awesome 👍😎...
@yashasvichoubey9179
@yashasvichoubey9179 2 роки тому
I second this👍🏻😎
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you 👌🏻👍🏻
@prabhatverma7538
@prabhatverma7538 2 роки тому
Keep up good work , you are truly inspiring and keep motivating us... :)
@rayenibex1537
@rayenibex1537 2 роки тому
nice it work perfectly. the only issues I face is "brownout detector was triggered"
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out the video . 👍Provide good rechargeable battery supply.
@vanitasingh8882
@vanitasingh8882 Рік тому
Bro my esp32 cam got heat up and is no longer connecting to wifi. When I connect it, it automatically disconnects after 3-5 seconds but now it's not even connecting. Bro my whole project is ruined. Please help
@rashmiranjanjena3955
@rashmiranjanjena3955 Рік тому
Same here bro 😖
@naveennandhakumar
@naveennandhakumar 4 місяці тому
Same here bro😭😭😭
@alkasingh7815
@alkasingh7815 3 місяці тому
Re-upload the code
@alkasingh7815
@alkasingh7815 3 місяці тому
Same I am also facing
@tanishqgohil4894
@tanishqgohil4894 2 місяці тому
​@@alkasingh7815did it worked ? By reaploading the code
@ramadanmusa3116
@ramadanmusa3116 Рік тому
Hello friend..i really appreciate the work you did,i made a follow up on every step and now the prototype is working fine
@hashincludeelectronics
@hashincludeelectronics Рік тому
Nice job 👏🏻👍🏻
@gamingwithprakalp
@gamingwithprakalp 2 роки тому
jabardast 😍😍😍😍😍😍
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you 🙂
@electro-baka8505
@electro-baka8505 2 роки тому
awsome brooo !!!
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you very much 👌🏻👍🏻
@electro-baka8505
@electro-baka8505 2 роки тому
@@hashincludeelectronics your wellcome haha
@makexyz924
@makexyz924 2 роки тому
Love your code for stream video. Really short...
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you very much 🙂👍🏻
@camilomantila3401
@camilomantila3401 9 місяців тому
es el unico que me funciono jejje muchas gracias excelente video :)
@hashincludeelectronics
@hashincludeelectronics 9 місяців тому
Muchas Gracias 🙏
@user-xy9xo4cn9v
@user-xy9xo4cn9v 7 місяців тому
Nice project ,My son is trying to do this project he is facing some issue uploading the code to the ESP32 cam ,how do we contact .
@AviationBased95
@AviationBased95 11 місяців тому
incredible
@hashincludeelectronics
@hashincludeelectronics 10 місяців тому
Thank you very much 👍🏻👏🏻
@AviationBased95
@AviationBased95 10 місяців тому
@@hashincludeelectronics welcome. i keep used yr vid as guidance
@manivarmabuddharaju8152
@manivarmabuddharaju8152 7 місяців тому
DTI ( Digital Thinking Innovation ) Lab Passed Successfully 😂
@fouzanjaved5441
@fouzanjaved5441 2 роки тому
Sir, I love your projects very much. Sir can you please make a 6 dof ps2 controlled robotic arm car and give me the circuit diagram and the code for the 6 dof ps2 controlled robotic arm car?
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out video 👏🏻👍🏻. I have question that how this car will look like ?
@akshatt25
@akshatt25 7 місяців тому
Please can you make a video on how to capture and save image on laptop using esp 32 cam please please please before 18 sept
@JackHoving
@JackHoving Місяць тому
Perfect presentation although you speak very rapidly. Many thanks for this project. Would it be possible to add a collision protection using an HC-SR04 US sensor and defining 10 cm or so as minimum distance?
@hashincludeelectronics
@hashincludeelectronics Місяць тому
Thanks for checking out the video 👍🏻👏🏻. Yes we can add ultrasonic sensor in this project . I have not used this in any of my esp32 project yet . I generally use NewPing library in Arduino boards for ultrasonic sensor . For esp32 NewPing library will not work . You need to read the ultrasonic sensor using pulseIn method . Please check more details on internet in this 👍🏻👏🏻
@phucdinhviet6320
@phucdinhviet6320 10 місяців тому
Or do you have to edit lines 484 and 485?
@loverosers9918
@loverosers9918 2 роки тому
Great job Done How we Add More Option add like Car Front light and Haron bib
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks 👍You can easily add those additional option in the code. Just copy paste the existing sliders/button and change the name.
@janinho82
@janinho82 2 роки тому
Hi! Your videos are super interesting, I would like to make a camera like this with a servo motor to raise and lower, everything in the RC car, so that the movement of the sides can be controlled. Also integrate all of this into Home Assistant with espHome. Do you know it? I would really like to do it if it could also be controlled via Wi-Fi or bluetooth (with Home Assistant) from outside as a security camera. And if in addition to having a battery it could be connected to the home network for charge it, then would be so cool. Hopefully you can do it to solve doubts, genius!
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out the video and your comment 👍 Looks interesting idea.
@FIYTPIT
@FIYTPIT Рік тому
Nice video bro, all explained well. I have one question. I already try your project and everything is fine until i control the car. The wifi disconnect after the car move a bit. Is the cause from my battery?
@hashincludeelectronics
@hashincludeelectronics Рік тому
Thanks for checking out the video 👍🏻. Yes . Please use only rechargeable battery .
@jocar3665
@jocar3665 Рік тому
Interesting video. Is it possible to connect the esp32 cam module to arduino and not directly to l298 motor driver but can still have the functions?
@hashincludeelectronics
@hashincludeelectronics Рік тому
Thanks for checking out the video 👍🏻. However I did not understand your question .
@Divyash19
@Divyash19 2 роки тому
Great project Can you make it from nrf24l01 transmitter and reciver please
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thank you . Actually this module itself works on wifi communication so should not be a good idea to use nrf on top of it (nrf also uses same 2.4 GHz band 😉). May be if we use other camera module which does not have communication inbuilt , there we can use nrf trans receiver module .
@saksham-6206
@saksham-6206 6 місяців тому
@hashincludeelectronics Great project but I have a question that can I use 11.1v 2200MAH battery??
@hashincludeelectronics
@hashincludeelectronics 6 місяців тому
Yes you can use that . That’s a nice battery having good power 👍🏻👏🏻
@saksham-6206
@saksham-6206 6 місяців тому
@@hashincludeelectronics Thanks
@gamingwithsaksham4487
@gamingwithsaksham4487 6 місяців тому
Hi great project but can we use 9v non rechargeable battery
@hashincludeelectronics
@hashincludeelectronics 6 місяців тому
Please do not use that non rechargeable battery . Use only rechargeable battery to avoid issues 👍🏻👏🏻
@gamingwithsaksham4487
@gamingwithsaksham4487 6 місяців тому
@@hashincludeelectronics Actually can you provide a link for buying battery pls because I cannot understand what battery should I use for this project
@gamingwithsaksham4487
@gamingwithsaksham4487 6 місяців тому
@@hashincludeelectronics And also if we will use 9v non rechargeable battery the project will work or not because the rechargeable batteries are so costly.
@jmahan47
@jmahan47 2 роки тому
Very Nice. Any way to view the camera and control the car from anywhere... outside of the local network?
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Currently we can not . However I am finding a way to do it . Will let you know once I test it .
@narendravadlamudi
@narendravadlamudi 8 місяців тому
What is the car mobile can u please explain further
@joelkruger6654
@joelkruger6654 Рік тому
I see that the enA and enB terminals on the motor driver each have 2 pins, do you use 2 female jumper wires for each pin?
@joelkruger6654
@joelkruger6654 Рік тому
I checked the circuit diagram and seems like only the front pin is used, is this correct?
@hashincludeelectronics
@hashincludeelectronics Рік тому
You need to connect both the pins .
@joelkruger6654
@joelkruger6654 Рік тому
@@hashincludeelectronics Because looking here raw.githubusercontent.com/un0038998/CameraCar/main/Diagrams/Camera%20Car.png it seems like only the front pins of enA and enB are connected to IO12?
@hashincludeelectronics
@hashincludeelectronics Рік тому
@@joelkruger6654 oh ok . I understood now . Yeah you need to connect the front pin only.
@Rayhan_Ahmed.
@Rayhan_Ahmed. 2 роки тому
ESP32 does not require any internet connection? Please sir answer me...I am from Bangladesh sir, and I loved your video ❤️
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
In this project esp32 works in AP mode which creates local WiFi network itself . And our mobile can connect to it . We don’t need any internet for this.
@narayankatore526
@narayankatore526 3 місяці тому
@hashincludeelectronics but I am using the 18650 lithium ion 3.7v 2600mah 2 batteries
@hashincludeelectronics
@hashincludeelectronics 3 місяці тому
Make sure those batteries are charged fully 👍🏻👏🏻
@garytt8313
@garytt8313 3 місяці тому
Great project really enjoyed. Where does the wifi from "MyWifiCar" come from? Also could we replace it with our own wifi to make it stronger? Thanks
@hashincludeelectronics
@hashincludeelectronics 3 місяці тому
Thank you very much for checking out the video 👍🏻👏🏻. This project creates its own wifi network hence the ssid . You don’t need to use your home wifi credentials.
@hecticaperture
@hecticaperture 6 місяців тому
Does the source of the voltage matter? Does it HAVE to be LiPo? I have a surplus of 18650 cells and some rechargable AAs and wonder if i can use these. Also all videos for these cars use the same motors, can i use different motors? (I need smaller motors) Thank you for your videos
@hashincludeelectronics
@hashincludeelectronics 6 місяців тому
Thank you very much for checking out the video 👍🏻👏🏻. Yes you can use any rechargeable battery . Make sure total voltage is between 7-12 V. Also you can use other DC motor as well👍🏻
@hecticaperture
@hecticaperture 6 місяців тому
Would 4 18650 be too much?? @@hashincludeelectronics
@abhinavmb7279
@abhinavmb7279 2 місяці тому
​@@hashincludeelectronicscan we use the 9v dc battery (non rechargeable)as power supply.
@hashincludeelectronics
@hashincludeelectronics 2 місяці тому
@@abhinavmb7279 no . Please don’t use that non rechargeable 9v battery . It causes power issues . Use only any rechargeable battery 👍🏻👏🏻
@abhinavmb7279
@abhinavmb7279 2 місяці тому
@@hashincludeelectronics 👍
@nileshladani
@nileshladani 7 місяців тому
Hi sir how can camera vision horizontal
@walidamourinnovations8071
@walidamourinnovations8071 7 місяців тому
Thank you very much sir for this amazing explication but i have problem when i write in the browser the ip adresse . Nothing do and i dont get the web page of the application . Please what can i do in this case . Thank you
@hashincludeelectronics
@hashincludeelectronics 7 місяців тому
You need to connect to wifi as shown in video . Please check 👏🏻👍🏻
@JackHoving
@JackHoving 25 днів тому
Straightforward using the HC-SR04 in the loop doesn't work. Blinking without delay makes the WIFI unstable. Using a second ESP32 with distance calculation and relais between LN293 and the motors works, but is a bit clumsy solution. I'll continue my research. Perhaps multitasking with the second core in the ESP32 is a possibility.
@hashincludeelectronics
@hashincludeelectronics 19 днів тому
Good observation and finding . I need to use HCSR04 in esp32 for my next project. I am going to try it 👍🏻👏🏻
@joelkruger6654
@joelkruger6654 Рік тому
Do the TT gear motors have specific positive and negative terminals? And how can I tell which is which?
@hashincludeelectronics
@hashincludeelectronics Рік тому
Not really. You can interchange the wires and the rotation of motor will be reversed. There is no such specific +v and -v terminals for these TT gear motors..
@joelkruger6654
@joelkruger6654 Рік тому
@@hashincludeelectronics Thank you very much! Appreciate the quick response
@joelkruger6654
@joelkruger6654 Рік тому
@@hashincludeelectronics So would I be correct in saying that any 2 terminals of 2 TT gear motors can be connected to any OUT pin of the motor driver?
@hashincludeelectronics
@hashincludeelectronics Рік тому
@@joelkruger6654 yes
@phucdinhviet6320
@phucdinhviet6320 10 місяців тому
If you edit those 2 lines, what should you do?
@cvasantrao
@cvasantrao Рік тому
Nice and interesting Project. Can I convert this to a Mecanum wheel Robot Car using two L298N driver module and using esp32-cam?
@hashincludeelectronics
@hashincludeelectronics Рік тому
Sure you can make that . But make sure you have sufficient pins on esp32 cam to control 2 L298N modules .
@cvasantrao
@cvasantrao Рік тому
I am not very familiar with esp32-cam and my question was in fact regarding wether the esp32-cam has sufficient pins to control 2 L298N driver modules. Any suggestion is appreciated . Both the projects are excellent and a hybrid would be fantastic. Keep up the good work👍
@hashincludeelectronics
@hashincludeelectronics Рік тому
@@cvasantrao I am glad that you thought of using this esp32cam with mecanum wheels using 2 L298N modules 👏🏻👏🏻 actually L298N has 6 pins for controlling so we need total 12 pins which are not available on esp32 cam . However we can still control the L298N using just 4 pins . Ena and enb connected to 5 volts . So we will need total 8 pins only and can be supported by esp32 cam .Can you try it ? Check my mecanum car video for this connection. Let me know if you face any issue .
@cvasantrao
@cvasantrao Рік тому
@@hashincludeelectronics I think we need only nine pins because the 4 enable pins of the L298N can be connected to one GPIO. So we would need only nine pins. I will be ordering the parts very soon and try it out and update you. Thanks again.
@hashincludeelectronics
@hashincludeelectronics Рік тому
@@cvasantrao nice thinking 👏🏻👏🏻 would wait for it 👍🏻
@frankzheng3479
@frankzheng3479 2 роки тому
Thanks for the project for ESP32-CAM with AP mode in HTTP Web but I try to download the project in the link and add the library, but I find that it always cannot timely to update the video even if I close the Bluetooth and other 2.4gdevice. Could you help to check it ?
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out the video 👍 However I did not get the question properly. Could you please elaborate more or you can send me the query on my email id un0038998@gmail.com.
@YPTechDATIA
@YPTechDATIA Рік тому
ukposts.info/have/v-deo/fINki3h9aZmd1IU.html
@arjunkp1331
@arjunkp1331 8 місяців тому
Can u have a detail about the website you used to control the car?
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
It is made using html and java script. This is included in car code itself . Please check video for more details 👍🏻👏🏻
@arjunkp1331
@arjunkp1331 8 місяців тому
@@hashincludeelectronics u have any code for creating website.
@yourfriendfaheel9784
@yourfriendfaheel9784 8 місяців тому
Sir Can We Use Arduino Nano for Arduino Uno ?
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
Yes you can 👍🏻
@darkghostrider2014
@darkghostrider2014 6 місяців тому
Very nice project sir❤ I have an L293d motor so will the codes be same for that also or will there be any changes?
@hashincludeelectronics
@hashincludeelectronics 6 місяців тому
Yes there will be change . You need to check the pins connection according to L293D module and make changes in code . 👍🏻👏🏻
@darkghostrider2014
@darkghostrider2014 6 місяців тому
Thank you so much sir🙏
@hashincludeelectronics
@hashincludeelectronics 6 місяців тому
@@darkghostrider2014 Welcome 🙏
@darkghostrider2014
@darkghostrider2014 6 місяців тому
Sir could you please tell me where can i get the enA and enB speed control pins in the L293d motor module it would be really helpful!!
@305adityabarai8
@305adityabarai8 8 місяців тому
Bro for simulation which software should we use
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
You need to directly open the car app on your mobile 👏🏻👍🏻
@305adityabarai8
@305adityabarai8 8 місяців тому
Bro I need to Perform simulation on software such as proteus and other but all components are not available on 1 software
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
@@305adityabarai8 unfortunately I am not aware of this simulation 👍🏻
@305adityabarai8
@305adityabarai8 8 місяців тому
Bro can you ask someone🙏🙏
@305adityabarai8
@305adityabarai8 6 місяців тому
Hi sir can you tell me how can I setup esp32 after uploading the code that ssid and password thing in the code and I didn't understand the app thing that u told in the video
@vaniaa3535
@vaniaa3535 2 місяці тому
Nice video!! 😄😄😄 I have a question.. If I’d like to use a 6wheel car with 6dc motors… what power source can I use???
@hashincludeelectronics
@hashincludeelectronics 2 місяці тому
You can use the same battery power used in project . Make sure it should be rechargeable battery 👍🏻👏🏻
@vaniaa3535
@vaniaa3535 2 місяці тому
@@hashincludeelectronicsThanks for the answer
@petr6067
@petr6067 2 роки тому
Hi, great project. Please, but for advice. After installation, I have a rotated image. How to please rotate the camera image 90 °. Thanks
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
It will need code changes . However install the camera as I installed in the video and video will be good .
@petrpetr1275
@petrpetr1275 2 роки тому
Mám to nainstalované přesně krok za krokem podle vás, ale obrázek je otočený :-(.
@melsereynivorth6449
@melsereynivorth6449 7 місяців тому
Hello Sir! can you tell me the app that is used for this project? I could not find the app on google.
@hashincludeelectronics
@hashincludeelectronics 7 місяців тому
The app is created inside the car code itself . Please check the video for details on how to open that app when car is powered 👏🏻👍🏻
@melsereynivorth6449
@melsereynivorth6449 7 місяців тому
@@hashincludeelectronics Thank you. Do we need serial number after uploading code?
@hashincludeelectronics
@hashincludeelectronics 7 місяців тому
@@melsereynivorth6449 which serial number ? We need to use exact ip address as shown in video for app on mobile .
@ivanz9324
@ivanz9324 4 місяці тому
Is it possible to use LCD touchscreen with ESP32 for controlling this car and getting video from it? To avoid using cellphone...? Like WT32 SC01 plus or even T-deck with mounted trackball?
@hashincludeelectronics
@hashincludeelectronics 4 місяці тому
You need to have touch screen device and also internet browser to open this app and work properly . If your LCD screen device supports all these then yes you can use 👍🏻👏🏻
@ivanz9324
@ivanz9324 4 місяці тому
So, web video server or access point is the only way to capture video from esp32cam?
@LylunnaherLina-dh6on
@LylunnaherLina-dh6on 7 місяців тому
If i use L293D Motor Driver Shield, will there be any problem?
@hashincludeelectronics
@hashincludeelectronics 7 місяців тому
You should use only L298N module in this project 👍🏻👏🏻if you use other module then you need to change the code and connections as well 👍🏻
@learnobotsayeza
@learnobotsayeza Рік тому
wow
@hashincludeelectronics
@hashincludeelectronics Рік тому
Thank you very much for checking out the video 👍🏻👏🏻
@konotsupade
@konotsupade Рік тому
sir i already follow your scheme with cam position like yours, but my video not rotate
@baraalsaeed6865
@baraalsaeed6865 2 роки тому
Thank you Can you tell me if I can use esp 32 with 5servo motors?
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Sure . You can use those many servos . Do you want to use it with esp32cam or just esp32? Because if you are using servo motors with esp32cam and with ESPServo library , then you should consider checking out my video on PanTiltControl . There I have explained how to use servo with cam. Because there is some timer conflict can happen . However you can easily use servos with other esp32 modules and ESPServo library .
@baraalsaeed6865
@baraalsaeed6865 2 роки тому
@@hashincludeelectronics can you help me plz I want to stream video as a feedback of the actions of a distance robot which is hand robot and hand robot needs 5 servo motors So can you suggest for me suitable controller for interface with servo motors and I can make steaming with it ?
@bazejgawlik6257
@bazejgawlik6257 Рік тому
Hello, I did everything like in the movie and it works great, but I have a problem with the image from the camera, or the pmalu refreshes or not at all and the image is still
@hashincludeelectronics
@hashincludeelectronics Рік тому
There is one setting which says MAX_MESSAGE_QUEUED that needs to be changed . Could you please check that part in the video ? It’s must needed . It will resolve your issues .
@codmhumanoid9271
@codmhumanoid9271 Рік тому
1:39 bro did u just solder the wires to the motors without putting anything else or you put glue type thing?
@hashincludeelectronics
@hashincludeelectronics Рік тому
It’s up to you 👍🏻
@sunhilldiy
@sunhilldiy Рік тому
Hi, thanks for the great video. I made a prototype which be able to control motors and LED, but no image on both Iphone and Android phone, what can be? BTW. can't control motors on laptop.
@hashincludeelectronics
@hashincludeelectronics Рік тому
This app only works on touchscreen device . For proper image/video there is one setting which needs to be done . Please check the video for this setting .
@3denym860
@3denym860 Рік тому
@@hashincludeelectronics Hi, how to rotate camera image from arduino code?
@shamanthstech8359
@shamanthstech8359 2 роки тому
I have a doubt, ->After u put glue gun and paste the esp32 cam anddo all connections at the first, afterwards hwo do we connect it to arduino? ->After all I tried uploading the code and then do all the connections, in the connections photo You have given the direct current from the battery, where as in the video the thing you have done is you have given connection from the motor driver. Which should I follow now? ->can I use a 9v HW Battery? Or shud i use the Lipo 3s battery itself? Bcoz It looks too expensive. And the budget of the whole project is 2000. Please reply asap, as i am in the work of the project Thank you!
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out the video 👍🏻once code uploaded and everything is done , do not connect it to laptop . Just provide power supply with battery. Do not use that 9v battery as it does not provide enough power. Use some rechargeable battery .
@shamanthstech8359
@shamanthstech8359 2 роки тому
@@hashincludeelectronics is duracell 1200mAH rechargable battery be enough
@shamanthstech8359
@shamanthstech8359 2 роки тому
@@hashincludeelectronics nd can u asnwer me the second point?
@mohansundar3493
@mohansundar3493 Рік тому
nice project ! which app you used ?
@hashincludeelectronics
@hashincludeelectronics Рік тому
It’s inbuilt in Arduino code and created using html and java script 👍🏻
@andrivie579
@andrivie579 Рік тому
in the future you can enter the function capture image brother
@hashincludeelectronics
@hashincludeelectronics Рік тому
That’s good idea 👍🏻
@carlosmateoluisreyes3229
@carlosmateoluisreyes3229 Рік тому
On which platform do you develop the control panel applications?
@hashincludeelectronics
@hashincludeelectronics Рік тому
It’s html and java script . So I create sample html page on windows and then add that text code into Arduino code .
@-SubashanS
@-SubashanS Рік тому
are we supposed to disconnect all the connections from adruino and carry on with the motor module ?
@hashincludeelectronics
@hashincludeelectronics Рік тому
Yes please.
@narendravadlamudi
@narendravadlamudi 8 місяців тому
What is the car mobile app can u please explain further
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
This mobile app is created using html and java script . However the code for the app is already included in the Arduino code itself 👍🏻👏🏻
@narayankatore526
@narayankatore526 3 місяці тому
bro, if we have to connect the io 12 pin to ena and enb pin, then we have to remove its upper cover or not?
@hashincludeelectronics
@hashincludeelectronics 3 місяці тому
Yes we have to 👍🏻👏🏻
@noorabushawar2120
@noorabushawar2120 Рік тому
Hi , in the first line in the code, there is a massage appears on the screen wich said ( esp_camera: No such file or directory) , what is the meaning of that? I exactly do the same steps as you , please can you help me in short time
@hashincludeelectronics
@hashincludeelectronics Рік тому
Thanks for checking out the video . You need to install the esp32 board as shown in video . Also make sure to select the esp wroover board while uploading the code . Follow complete steps in video 👍🏻
@noorabushawar2120
@noorabushawar2120 Рік тому
OK, there is another message said that ( class wifi class has no member named softAp) line 477 . How can I solve it?
@psykopat81
@psykopat81 6 місяців тому
could you please make this car accessible from anywhere in the world ? not in same network .. (maybe using blynk or ngrok)
@hashincludeelectronics
@hashincludeelectronics 6 місяців тому
Nice idea . I will try 👍🏻👏🏻
@BerreSenaKIRAC
@BerreSenaKIRAC 10 місяців тому
how can i add taking photo function by this can you explain me?
@abhishekkuntare4640
@abhishekkuntare4640 2 роки тому
which creditionals i put it in ssid and password my own or your project in that case im confused
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Use the credentials from the video 👍🏻
@user-sq8rw4kn5b
@user-sq8rw4kn5b 2 роки тому
when I drag speed & light slider, This sentence " Serial.printf("Key [%s] Value[%s] ", key.c_str(), value.c_str()); " works exactly. But when I push buttons(move buttons), the sentence is not display anything. Please inform me.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out video 👍🏻. Are you using it on computer screen or laptop ? Those move buttons will only work on touch screen like mobile .
@loanthininja5737
@loanthininja5737 2 роки тому
Do i use lipo 7.4v and arduino chip smd? Please answer me, thanks.
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Nope . This project needs esp32cam module .
@flm_thunder.8597
@flm_thunder.8597 6 місяців тому
There's a small problem... How to connect 2 cables into io12 The EnA and EnB is 2 different ports... So do we cut the jumper cable and then connect the 2 and then put it together?
@hashincludeelectronics
@hashincludeelectronics 6 місяців тому
Yes exactly 👍🏻👏🏻
@chetankumarparmar6304
@chetankumarparmar6304 8 місяців тому
Hi sir camera car programme main link me di gayi asynctcp and espasyncwebserver library mein espasyncweb server zip file not contain error aa rahi hai to plz iska solution bataye
@hashincludeelectronics
@hashincludeelectronics 7 місяців тому
Please check the video for detailed step 👍🏻👏🏻
@exammotivationalcorner9369
@exammotivationalcorner9369 8 місяців тому
What is budget to do this project
@hashincludeelectronics
@hashincludeelectronics 8 місяців тому
You can easily add all components price based on from where you would like to buy components. 👍🏻👏🏻.
@abhinavpandey558
@abhinavpandey558 Рік тому
which application you use for creating diagrams?
@hashincludeelectronics
@hashincludeelectronics Рік тому
Its fritzing
@sumitsingh-fm2nz
@sumitsingh-fm2nz 2 роки тому
can we make this project using only two motor like 2 motor at back but 4 wheels?? PLS REPLY ASAP I'M WORKING ON A PROJECT... THANKS IN ADVANCE
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out the video 👍🏻. I did not clearly understand your requirement. Can you please elaborate more ?
@sumitsingh-fm2nz
@sumitsingh-fm2nz 2 роки тому
@@hashincludeelectronics You have included 4 motor for 4 wheel i.e 4WD... is it possible to make using 2 motor i.e 2WD
@TheOmareichon
@TheOmareichon 2 роки тому
If I'm using a 7.4 V battery 2s lipo it will work? I'm still waiting for my adaptor to attach it to the L298n, thank you
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
Thanks for checking out video 👍🏻 yup it will work with lipo 2s battery also as it will provide more than 7 volts to L298N driver . But make sure you take 5 v from L298N driver and provide to esp32 . It’s always better to make sure esp32 gets proper power supply to avoid issues .
@TheOmareichon
@TheOmareichon 2 роки тому
@@hashincludeelectronics thank you very much it works good just the commands are inverted 😂 i'm looking for an error in my assembly process
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
@@TheOmareichon that’s great 👌🏻keep it up . If motors are rotating in opposite direction then reverse the wires of motor connected to L298N driver accordingly.
@TheOmareichon
@TheOmareichon 2 роки тому
@@hashincludeelectronics Hi again sir, I make some changes to the program cause I'm trying to put it on a buzzer in the middle box of the mobile app, but it doesn't work propely :c could you please see if there is a mistake in the code ? I'm gonna put the lines/sentences that I aggregated: /// #define BUZZ 16 ////define the function /// ⇦ ⚟ /////middle botton with a symbol ⇨ /// void buzzer(int inputValue) { switch(inputValue) { case 1: digitalWrite(BUZZ, HIGH); break; case 0: digitalWrite(BUZZ, LOW); break; } } /// if (key == "MoveCar") { moveCar(valueInt); } else if (key == "Speed") { ledcWrite(PWMSpeedChannel, valueInt); } else if (key == "Buzzer") ///make the key { buzzer(valueInt); } else if (key == "Light") { ledcWrite(PWMLightChannel, valueInt); } } //// moveCar(STOP); pinMode(LIGHT_PIN, OUTPUT); ledcAttachPin(LIGHT_PIN, PWMLightChannel); pinMode(BUZZ, OUTPUT); ///define the pin state/mode /// I hope you can help me, I'm using the output IO16 of the ESP32 and making other things to make it work, greetings from Mexico (Y)
@hashincludeelectronics
@hashincludeelectronics 2 роки тому
@@TheOmareichon first of all please do not use IO16 pin . It is internally used by some other functionality for psram. You can try using some other pins . Also for passive buzzer to work you need to write some pwm values to it . Not sure if digitalWrite will work. You can use the ledcWrite same which I used for controlling light . Are you using active buzzer ?
@hasnain824
@hasnain824 6 місяців тому
Hey, I have connected all the wires properly according to your video, and after connecting the battery, the esp light blinks for 2/3 seconds then stops but motor driver shield lights on. But, the esp32 cam wifi isn’t showing up! How to fix this issue?
@hashincludeelectronics
@hashincludeelectronics 5 місяців тому
Please use rechargeable battery as it will solve any power related issues 👍🏻👏🏻
@dr.chebrolulingaraju1061
@dr.chebrolulingaraju1061 Рік тому
Dear sir, very nice video. But i have a small doubt. what about arduino board connections? can u please tell me?
@hashincludeelectronics
@hashincludeelectronics Рік тому
It is shown in the video. Please check the video slowly and carefully 👍🏻
@selvaff3734
@selvaff3734 3 місяці тому
For programming esp32 cam can i use any other board arudino uno is too costly
@hashincludeelectronics
@hashincludeelectronics 3 місяці тому
Sure you can use 👏🏻👍🏻
@selvaff3734
@selvaff3734 3 місяці тому
Sorry to interrupt you but can you name one that i can use
@hashincludeelectronics
@hashincludeelectronics 3 місяці тому
@@selvaff3734 you can use Arduino nano and upload code using the method shown in video. It’s same . Or you can use other method to upload the code using FTDI module that is usb to UART programmer . Please check for details on internet on this method .
@yourgarden141
@yourgarden141 11 місяців тому
Sir this project is so good!! . But i didn't understand about code part and website and all sir please can you help me out
@hashincludeelectronics
@hashincludeelectronics 11 місяців тому
The website coding is done in Arduino code itself . It is built in html and JavaScript 👍🏻👌🏻
@nevermore6831
@nevermore6831 Рік тому
hello great video but i have a problem where my ESP32 does not get power when i provided 5v using Arduino it works i can control the light but the car motors do not work. i used a normal battery non rechargeable is that the reason? and what other batteries can i use other than lipo I cant find it in my country. i hope you answer me soon I need submit the project.
@hashincludeelectronics
@hashincludeelectronics Рік тому
I have replied on other message 👍🏻
@indrayudhmandal4229
@indrayudhmandal4229 Рік тому
Hello, please reply me a bit fast it will be really helpful, will the same code work for 2 motors instead of 4? or do i need to make any changes?
@hashincludeelectronics
@hashincludeelectronics Рік тому
yes you can . No change needed.
@nathamlee228
@nathamlee228 7 місяців тому
do we also need 7v-12v battery for two motors or we can use instead 4 1.2v battery?@@hashincludeelectronics
@kisahinspiratif007
@kisahinspiratif007 Рік тому
thanks for the tutorial. I've tried to follow step by step. but the motor does not rotate why huh? the video and image controls already appear in the browser. it's just that the motor can not rotate.
@hashincludeelectronics
@hashincludeelectronics Рік тому
Please check the video slowly and carefully for any missing step . Also use only rechargeable battery 👍🏻
@SIXin1-lo3ft
@SIXin1-lo3ft 2 місяці тому
Amazing project but bro i got some error we have run the car but only left two tires and in backward all tires working but while move forward no tire is working and servo motores also not working i followed every step can you assist me in this regards i really appriciate, Thanks
@hashincludeelectronics
@hashincludeelectronics 2 місяці тому
Check the connections for motors to motor drivers 👍🏻👏🏻
ESP32 CAM Blynk Multiple Camera Surveillance
8:41
Viral Science - The home of Creativity
Переглядів 493 тис.
NO NO NO YES! (40 MLN SUBSCRIBERS CHALLENGE!) #shorts
00:27
PANDA BOI
Переглядів 82 млн
Самый большой бутер в столовке! @krus-kos
00:42
Кушать Хочу
Переглядів 6 млн
Arduino All-in-One Robot
8:29
DIY Builder
Переглядів 1,2 млн
How to make a surveillance robot using ESP32 Cam Module | Hash Robotics
24:20
ESP32 CAM Surveillance Car | SPY Camera Car
8:41
Viral Science - The home of Creativity
Переглядів 159 тис.
What is the HackRF One Portapack H2+
8:21
sn0ren
Переглядів 430 тис.
Cheap Remote Monitoring for ANY 3D Printer! #3dprinting
13:56
Nero3D the Canuck Creator
Переглядів 44 тис.
Infrared Soldering Iron from Cigarette Lighter
0:58
ALABAYCHIC
Переглядів 1,7 млн
Обзор Nothing ear (3) и ear (a) - ПРОРЫВ за $100
17:34
intermediate switch circuit #automobile #electrical #electricalswitch #powerswitch #delta #starwars
0:15