The New Method to Setup Raspberry Pi (2023 Update)

День тому

Raspberry Pi 5 👉 amzn.to/49axP8B
Learn the new way to setup your Raspberry Pi device using Raspberry Pi Imager. This video will step you through the exact process to format your Micro SD card and install the Raspbian operating system as well as booting up and configuring your Raspberry PI. We will also walk through how to connect to your device over SSH and VNC Remote Desktop.
Outline
Intro 0:00 - 0:33
Download RPI Imager 0:30 - 1:53
Connect SD to Computer 1:53 - 3:30
Flash Raspbian to SD Card 3:30 - 4:15
Power on Raspberry Pi 4:15 - 6:58
Configure OS 6:58 - 11:30
Find RPI on Wifi Network 11:30 - 13:56
Connect via SSH 13:56 - 15:46
Remote Desktop VNC 15:46 - 18:13
Host Website on RPI 18:13 - 21:14
Raspberry Pi Image
www.raspberrypi.org/software/
Real VNC Viewer
www.realvnc.com/en/connect/do...
Commands
SSH
ssh pi@raspberrypi
Ping
ping raspberrypi
Dig
dig raspberrypi
Update OS
sudo su -
apt-get update
apt-get upgrade
Reboot OS
sudo reboot
Modify Configuration
raspi-config
#raspberrypi

КОМЕНТАРІ: 244

@DataSlayerMedia 2 роки тому

See how you can extend your Pi's capabilities with extra modules like the Infrared Night Vision Camera...👉 ukposts.info/have/v-deo/mqCre4RqbKWSq2g.html

@taftr 2 роки тому

Thanks for the Tutorial... Looks like the only thing it saved here was having to download the OS image before burning it to the SD card. Been using Etcher for some time now and it works great. I did cringe when I saw you put the static sensitive Pi directly on the Rug. Might want to avoid that, especially now that winter is coming and static build up indoors can be an issue. If you re-mount the SD card to you Apple and add a file called "ssh" to that boot directory. Then ssh will be enabled at first boot. I use a program called Angry IP Scanner to locate the PI once its booted if you use a Network cable to connect the PI. WiFi will require you to use a monitor and keyboard

@lamarts1000 2 роки тому

Great job! Thanks for sharing. Setup is so much easier than it used to be.

@antonio_carvalho Рік тому

The informal, unscripted and natural way you made this video is really cool, like a buddy showing things to a friend. Thanks!!

@cobrin6437 2 роки тому

I respect what you've done here, even learned a thing or two... thanks Refactored

@DataSlayerMedia 2 роки тому

Thank you sir.

@NewAgeDIY 2 роки тому

Lots of important information to unpack. One point I would like you to consider, put the pi in a case before you start a demo. New user need to learn about ESD and protection from shorting out the board if it touches metal when powered. I have seen a number of Raspberry Pi’s damaged from careless handling. Now that the cost of a pi 8GB is now over $100 in Canada it’s going to cost you to replace it.

@DataSlayerMedia 2 роки тому

I use a case now.

@NewAgeDIY 2 роки тому

@@DataSlayerMedia / thanks that’s good. One big advantage in using a case is the fan that now is included with new cases. Keeping the pi 4 cool is away a good idea.

@ferrinheight 8 місяців тому

case or no case you should place it on a surface other than your carpet..

@tonyhall9433 2 роки тому

I installed Windows 11 on my pi 4. It took a few tries but it is working pretty good. I am now going to buy an 8gb Pi 4 and a SSD Case so I can make it a permanent PC.

@mattivirta 2 роки тому

i testing my raspi 4 88gb windows10 and has super slowly not can use daily table computrer newer too slowly and i has ower lock 2mhz and over volt 4.

@jarosawzon4272 6 місяців тому

There are five billion tutorials on how to configure a Raspberry Pi. They are all the same and BAD ! They assume that everyone already knows everything and only show the configuration, not what to connect and how. This is the only tutorial on the internet showing everything step by step. From the things you need, through connection, to installation. WELL DONE. THANKS AGAIN !!!

@gauravsinghselvaruben2756 8 місяців тому

Hi, i would like to ask if there is a way to set it up on mac, without reformatting the sd card, as I do have some progress on the pi that i would like to keep and continue on the mac

@kamertonaudiophileplayer847 9 місяців тому

If you are on Linux, just use the disk image writer. Make the right click on an image file and select the disk image righter. More likely it will be default app, so just double click the an image file.

@jayedgecombe2571 Рік тому

wow amazing explanation, just waiting for mine, total noob, so great help, and on a Mac !!!! superb..

@louh9473 2 роки тому

Great tutorial. Many thanks.

@gjkrisa 2 роки тому

Wow wish the gui pi configuration had everything the terminal version has missing the select user portion and I’m sure VNC will run a little better so that I don’t need to have it connected to a monitor to scale the image

@KingBarath125 Рік тому

Really great tutorial! Thank you!

@ai-robots.online126 Рік тому

Thank you very much for helping set up it.

@tobyharnish8952 Рік тому

I'm a blind user watching this video. It is exciting to know that the Raspberry 4 has a great acccessibility feature. Thank you.

@oozly9291 Рік тому

How are you typing blind?

@KiR_3d Рік тому

Hi! Can i update Raspbian (or whatever there is to update) without using the network? Just like old installation on PC/Amiga. I don't have a router (no need because of my provider's terms of payments - any extra device adds the same monthly price). If it's critical to use the hardware network then my best choice is only to swap the Raspberry with my PC.

@husammasri2985 2 роки тому

Hi there , Thank you for the useful information. My question is what type of raspberry pi did you use here? And is there a difference between the types ? What would suggest? Thanks one more time in advance

@vadermasktruth 2 роки тому

I think he's using a Raspberry Pi 4. I just bought one from Amazon and it just arrived. It came with a micro SD card with "Noobs" on it. I'm gonna hook up my Rasp Pi to my TV via HDMI, as soon as I pinch off this loaf and get off the toilet.

@DataSlayerMedia 2 роки тому

If you need small profile, use the zero otherwise use the raspberry pi 4

@kpm25 Рік тому

Thanks a lot for your work!!

@AllStarStockie 8 місяців тому

This was seriously useful DS. Thank you very much

@miccellomann 2 роки тому

Windows 10 and 11 can run ssh directly from the command prompt or with powershell. No additional software needed.

@redbeard716 2 роки тому

Came here to say this.

@DataSlayerMedia 2 роки тому

Oooh didn't know that 🌈 I would still advocate for setting up the linux sub system, it's such a good feature.

@redbeard716 2 роки тому

@@DataSlayerMedia, you keep saying "Linux sub system" like it's a thing. I think you're trying to refer to the command line interface, or, CLI. Windows has one. Has had it ever since computers existed. Do you have a Windows machine? In order to get to the command prompt, hit the Windows key, or click start, and in the search box (windows 11) type "cmd" and hit enter.

@Dwillztx 2 роки тому

@@redbeard716 lmao chillll you’re doing too much.

@gilloglya 2 роки тому

@@redbeard716 WSL has been a thing for a while....

@michaelweaver1 2 роки тому

Your video seems to be the only one I can find on UKposts where Orca comes up briefly when installing the operating system on a Raspbery Pie. Not everyone will find the audio message annoying. Blind people new to the Raspbery Pie who may need to know if a screenreader is included with the OS or rather who need screenreader access during setup won’t as it is important to someone with no vision at all like myself who is a newby.

@derekdowns6275 2 роки тому

Should've had your wpa_supplicant file ready to go as soon as you flashed the OS and had a /boot directory, and might as well created a zero byte ssh while you were there. Saves a couple of steps and WiFi AND ssh are active on first boot.

@jeanyluisa8483 2 роки тому

You can use the PI-Imager and press Ctrl+Shift+Z. You will get a menu to preconfigure your installation. That way you can enter your wifi credential, change hostname and password, enable SSH etc. without adding a wpa_supplicant. You can chose to save those data so the PiI-Imager will automatically adthis configuration whenever you prepare a new SD card.

@DataSlayerMedia 2 роки тому

Winner

@thamomentum Рік тому

THANK YOU FOR THIS!!!!

@Master.Billy.Quizboy 2 роки тому

You should get yourself an HDMI capture device. That would look a little better than using a camera.

@johankorten2797 2 роки тому

Very useful for novices. But not sure what is really the "new" about it, this is how I have done it for quite a while now.

@DataSlayerMedia 2 роки тому

A lot of the top videos on the matter were not even using Raspberry Pi imager.

@johankorten2797 2 роки тому

@@DataSlayerMedia even though I'm not afraid about the command line I always use the imager, great improvement indeed! Keep up the good work!

@jyvben1520 2 роки тому

sad, not using the extended options in the rpi imager, to setup wifi, ssh, user password and .., use ctrl shift x on the main screen (before or during imaging )to get those options

@DataSlayerMedia 2 роки тому

You are correct! I pinned a comment about it.

@albrecht.wrudolph5388 9 місяців тому

Great tutorial - thank you. However, neither ssh nor VNC let me access raspberry from my Mac. ssh = password not taken; VNC connection refused by computer ...

@isaacvampful Рік тому

I have a question, I downloaded one game for the pscx emulator section try to manually put a description on the game I saved it but when I booted up the game again all my other descriptions disappeared for my other ps1 games I try putting it all in again and save restart emulation and it's still gone, so I took the micro SD card out and put in my pc to see what was the problem I didn't see any bugs, try to fix it still no fix, now my dam options section disappeared and my ps1 section is gone but all my other section of games are still on it for my other game emulators, any advice?

@antonnym214 Рік тому

You do good work. Very nice explanation of what to do. I subscribed immediately.

@vamsinvizag4936 9 місяців тому

This is exactly what I need. Thank you! Great job.

@ronygonzalez1848 Рік тому

Hi Slayer, When I on minute 4:04 When I try to write the program It tells me that all existing data on 'Mass Storage Device media' will be erase. What does it mean ? Is it safe for my computer to proceed?

@FahriDesrizal Рік тому

Awesome, thank's bro

@angelpeng7384 2 місяці тому

I am all very new to this is and not tech savvy at all. I have an existing SD card with many files on it, basically with all the RetroPie roms. Since I need to run this SD card on the raspberry pi, that means I need down the raspberry pi OS onto this card. In the initial step when putting in the OS into the SD card, will that process erase all the existing files on my SD card? Please help thank you.

@Dhanuhammer 2 роки тому

I tried to use the imager and create a bootable Raspberry Pi OS Bullseye SD card, but it didn't show the display on a HDMI Monitor despite selecting the full version. Same thing worked fine with Buster.

@DataSlayerMedia 2 роки тому

hmmm

@echo-channel77 Рік тому

you need an anti-static mat, I was freaking out when I saw it on carpet material!

@mattivirta 2 роки тому

i try instalkl image to raspberry pi imager to 13 new good sd card and 90% say alltime could not mount card. and sometime has working sometime not working, and if has make imager not boot or if boot ok, can use but next time start raspi again same working sd card no boot or say not can read file or not found file.

@Master.Billy.Quizboy 2 роки тому

Am I the only one that thought that surge strip is a fire hazard waiting to happen? 🤣 Couple that with the carpet ESD risk that others mentioned... Don't risk your family and belongings unnecessarily!

@DataSlayerMedia 2 роки тому

How does one mitigate this?

@ayogamer1263 2 роки тому

what

@jacobschneider5438 10 місяців тому

Do you NEED to plug the sd card directly into the Mac?

@hashkeeper 2 роки тому

thank you!

@DataSlayerMedia 2 роки тому

You're welcome!

@tomdalgleish Рік тому

The re-flash wipes all stored files so how do I archive my python files for retrieval after the re-flash?

@nikkiadams668 8 місяців тому

I cannot get the rasberry pi to recognize a mouse or keyboard for me to click the "next" step. I'm not sure how to get it to do that

@mauricejohns3635 2 роки тому

Okay, Its 2022 where can I find somebody setting up Octoprnt using windows? Every version I see they're using a Mac computer my windows is using 64 not 32 does that make a difference all the versions I've seen so far are talking about using a Mac.

@AkashManish 2 роки тому

How did you record the screen? TV Recording?

@DataSlayerMedia 2 роки тому

Screenflow

@michaelangelosplinter185 2 роки тому

Can You connect the raspberry pi by a micro USB to the laptop and power it ? Instead of plugging into the socket ? I am connecting the Raspberry pi and laptop using a LAN wire. I have the SSD card downloaded with raspberry pi OS from the website . Yet, I don’t get it working. It says the connection has timed out or the host could not connect the server. I use wifi for my laptop at home

@DataSlayerMedia 2 роки тому

Yes the USB from your computer should power the device.

@fuzzs8970 2 роки тому

Thanks for the video. Can someone guide me how to solve this issue of pi getting blackout screen. Last a few seconds. But haphazard.

@DataSlayerMedia 2 роки тому

Haven't seen that one.

@fuzzs8970 2 роки тому

@@DataSlayerMedia seems I'm not the only one but no real solution has been found

@cjlowe1650 2 роки тому

I'll stick to the old way. Most my pi setups are headless and I'm so use to setting up manually

@essetee 2 роки тому

Press ctrl+shift+x in pi-imager and you can setup the way you want.

@cjlowe1650 2 роки тому

@@essetee I have done that and sometimes it holds the changes and sometimes it doesn't and it's either hit or miss. It doesn't matter what model I use it on. As I said I have the notes and .txt files with the setups to add into the files and also the notes (instructions) on how to set up the locals thru raspi-config. But whatever works for you. I also have created many images with all the setups based on the pi model and their capabilities and then change the I.p. address in the config files since I use .255 as my static IP address (last 3 numbers) so I can quickly change it to the correct IP in my free list, So easy it's almost effortless. Just be sure to change the user name (if you decide to) and definitely change the password.

@cjlowe1650 2 роки тому

@@essetee Also have images setup for 64-bit buster. Trying Tiny code soon on Pi Zero W.

@cssee 2 роки тому

I confirm that it is MICRO HDMI connector : )

@DataSlayerMedia 2 роки тому

I figured that out after the fact.

@gregbentzinger8263 2 роки тому

Nice ESD matt.

@DataSlayerMedia 2 роки тому

Are you mocking my fire prone electronic unit?

@tutacat 2 місяці тому

No you do not need to install the linux virtual machine. Ping, ssh, etc. are actually installed by default since windows 10 (and ping was way pack like in XP)

@shaikashmisaj4112 Рік тому

How much time you got to write SD card

@QwikKota 2 роки тому

Does this work for a Pi 3?

@tazo1jd Рік тому

we're and how do i find and install . the linux subsystem for win10 ?

@dracarnoir7606 Рік тому

Thanks .

@handledrug1588 Рік тому

what do you do at 9:40 i’m confused

@kirkD9349 3 місяці тому

I did everything you did, and my monitor shows nothing. The monitor works fine when connected to my laptop, but not to RBPi4. The RBPi4 looks just like yours, with the lights on. My only difference was the micro HDMI from RBPi4 goes into an adapter for regular HDMI. That adapter goes to VGA into my monitor.

@asiyasyeda8385 Рік тому

where to buy this module

@clapedbyisra9771 Рік тому

these vids cheers g

@aneeschughtai6725 2 роки тому

Hi sir Raspbian SSH Enable manual method share

@dartfrogdk 2 роки тому

You should not let you Pi lay on the carpet like that, risk of killing it from static electricity

@TheDaddyW123 2 роки тому

Came here to say the same thing. Seeing that made me realize this was not a person to trust with electronics.

@DataSlayerMedia 2 роки тому

You are right, but these things are surprisingly resilient. I basically do whatever I want with mine and don't use a case and it works just fine.

@dartfrogdk 2 роки тому

@@DataSlayerMedia you have been lucky

@pgtmr2713 2 роки тому

Meh. You'll wreck the micro-HDMI port before anything else goes bad. Overclock the hell out of it, Twister OS, Samsung BAR 128GB (400mbps.) Wanna feel better about ESD? Go watch Electroboom's Collab video with Linus.

@sidthetech7623 Рік тому

You should not let your Pi be put in a rocket for use in warfare. It will destroy the Pi and human lives.

@pascaltube8434 2 роки тому

which model should I buy, I just want to host DNS on this Pi

@DataSlayerMedia 2 роки тому

I would buy the best one model 4 8GB

@stephenridgway2720 2 роки тому

Rpi-imager can format sdcards if necessary.

@mattivirta 2 роки тому

erase, format many different image,bootloader change, sd card boot,usb boot, internet boot, my test internet boot alltime fail not working load ok but no go wallpaper main site.

@joelcolon2570 Рік тому

Can I download waze on to this unit ?

@gautombose4172 11 місяців тому

Hi. I get an error "Failed to create OpenGL context for format ........". how do I fix this problem?

@astoneuca7926 Рік тому

how do i connect the LTE sim ?

@dirtnoise_ 9 місяців тому

helpful video

@michaelinzo 10 місяців тому

Amazing, thank you for this guide!

@yuzzi8861 Рік тому

Note: 2:47 fat32 format if over 32gb

@michaelinzo 10 місяців тому

SSH not working after a day, yesterday it was working fine but has minor issues like after 30 mins connection is lost if not active

@MikeJohnMentzer 10 місяців тому

Solved? try turning off firewall

@MrSirPain 2 роки тому

Is there a way to Setup Raspberry Pi with a laptop instead of hooking up the keyboard, mouse and HTMI display?

@DataSlayerMedia 2 роки тому

Yes, the whole thing can be setup when you flash the OS (using advanced config) then in theory you could just power the pi and connect to it over the same network using ssh/putty etc.

@EminoMeneko Рік тому

I wish I could just buy one rn. :O

@Photoeye65 5 місяців тому

Great Video!

@amieljosiahguintu2033 6 місяців тому

How can I put my personal project on Raspberry PI, it is an Object Detection

@edabean007 Рік тому

You wont need to format the card. Imager takes care of that for you no matter the size.

@dominykasmisingevicius9434 Рік тому

Deos it work with rasberri pi 3+b

@Jaytraveler2 Рік тому

Can I still download the raspberry pi OS even if I already installed umbrella?

@DataSlayerMedia Рік тому

Not familiar with umbrella

@Jaytraveler2 Рік тому

@@DataSlayerMedia Understand, thank you

@tromzinck Рік тому

No hardware information on how to connect ssd to Pi 🤔

@markuszingg3131 2 роки тому

I totally miss whats suposed to be new about your way. Thath raspberry pi downloader sems to be a customized version of balena etcher which is around for long.

@DataSlayerMedia 2 роки тому

Many of the top tutorials on this are not using Raspi Imager, hence the new video.

@cjlowe1650 2 роки тому

Product doesn't work as described. Mine didn't have country , location.

@user-lz8dp8wb4r 3 місяці тому

does this work raspberry pi 3?

@undonebyr2205 4 місяці тому

Great tutorial. Man sounds baked as all hell tho

@Rick-vm8bl 2 роки тому

Very misleading to have "2022 update" in the title when you know very well that this is the same way its been done for several years. It's made worse by the fact that there genuinely is a new way now, and it's not covered here.

@rohangupte8372 Рік тому

Do you by any chance have a link to a video with the new method?

@smokingone Рік тому

can't you just plug a monitor into the hdmi port on the raspberry pi? also why install vim, pretty sure every distro ships with nano these days.

@adaycj 2 роки тому

So where was the part where you put your imaged OS into the Raspberry Pi? I must have missed it ... because without doing that your Pi is a brick.

@DataSlayerMedia 2 роки тому

It should be in there..

@adaycj 2 роки тому

@@DataSlayerMedia Nope. Lots of things happen between 4:22 and 6:37 but inserting the micro SD in the Pi before you boot isn't one of them. Your headless video shows it.

@RandyTamayo 2 роки тому

why do you have to google when going to raspberry website?

@DataSlayerMedia 2 роки тому

I route everything through Google as a security measure.

@bvkirangoud1263 2 місяці тому

I want to monitor raspberry pi through vnc viewer in which raspberry pi is connected without using wifi which means I am using gsm module which is sim slot and it is connected through mobile network Anyone please help me

@WRWhizard 2 роки тому

Not all that new, think I did this almost a year ago. Got two pi, one running Kali, the other a Apache web server and some other stuff.

@DataSlayerMedia 2 роки тому

Why Kali?

@professormoriarty703 2 роки тому

There is always these guys on every post for anything Linux based . They always have “done everything and everyone’s tutorials are late “ don’t pay comments like this no mind or attention great 👍 video. Ignore the toxic Linux guys they show up everywhere being negative. Your video was helpful to many

@WRWhizard 2 роки тому

@@professormoriarty703 Not intended to be 'toxic' or critical. Just wanted to comment.

@suparnaprasad8187 Місяць тому

When I connect it to my windows 11 laptop, I see nothing. Why is that?

@HiltonT69 2 роки тому

A lot of misinformation about Microsoft Windows in this video. :(

@DataSlayerMedia 2 роки тому

Feel free to correct me! All I know about Windows is you should download the linux subsystem :)

@julianbrown1331 2 роки тому

@@DataSlayerMedia no need for WSL if you just want ping (been standard to MS forever) and SSH (ok - that's fairly new). I'd still recommend WSL but it really isn't necessary