this is the channel i get the most excited for.

Guys! The engine is actually is SOHC, as the second pulley is there for looks. I receive increasing number of comments about this, and I wanted to address it. Trust me, I know what I'm dealing with 😉 Also if you're interested in the engine, here it is: NR-200 Engine ➞ bit.ly/3ylXSGU Use code: jq90 for 10% discount.

This would be a great setup for oval racing! It seems so perfectly balanced.

I love the sound of that little motor. The crackle, and the quick revs really makes it sound good. Thanks for sharing the video post and best of luck 🍀to you and your family 👍🏻

Absolutely insane on how precise and pristine your work is!! Love it!!

This is just so awesome! I've been watching your vids for the past few years and you really have refined your technical skill and your video styling too. Great content!

Absolutely awesome as usual! The finished layout is a thing of beauty!

I love the sound that thing makes! The sound when you turned off those splines was also satisfying!

Love following these builds you have going! Thanks for sharing, sir.

I thoroughly enjoy this channel. The modifications you do are awesome always waiting to see what you are going to do next. 😀❤👍🇨🇦

This one sounds sooo good. These are so cool. And what you do is amazing.

Nice improvement over the prototype, it would be interesting to to disassemble both and see what else has changed.

Looks good. Keep up the good work! Can't wait to see what you create next.

Always impressed in Every upload !! Nice/clean set-up 👍😎

Love your channel bro, your things u make just get better and better. 💯💯💯🔥🔥🔥🔥 it sounds different aswell and it sounds mean as whn u come off the throttle and its slowing down sounds well goods

Subscribed Johnny, just discovered your channel, I love it. Keep up the great content.

I love this channel so much. Keep em coming

Big difference. Always excited to see when you post.

I could watch your videos all day! It would be amazing to come and observe you work

Awesome man. I have literally daydreamed about a real tiny motor in an RC car exactly like this since I was a teenager, this hits me in the heart. (=

That's some great improvement over the beta!!! Great video!! Can't wait for more!!! Maybe we could get a Full Toyan engine comparison video sometime??

So much gets packed into a 12 minute video. Thanks for sharing.

Impressive work brotha. Actually sounds pretty good too. Wasnt expecting that. I was expecting the typical nitro angry bees sound.

The attention to detail is so satisfying.

Great little engine. It sounds and Revs so well !!!

That looks like so much fun! Awesome work

Awesome! Cannot wait to get mine

Love your videos! I run a small lathe too and think I have a worthwhile tip for you. Try the honed carbide inserts marketed as "for aluminum". They lower the load on your machine and produce outstanding surface finish. They cut steel just fine (they are still carbide after all). The honed sharp cutting edge also lets them take the really fine cuts for those times when you need to remove a half thou to put a part on size.

you're a beast, keep it comin.

Awesome people, really smart. You impressed me. Makes me go crazy with every clip. Thank you very much for a great video to watch and enjoy. FC from Thailand 🙏🏻🇹🇭🖤🤘🏿

such layout would have blown my 12 year old rc car loving mind in the 80s , and even for the 2020s is f ...n amazing, great work

I feel I should be paying you for the therapy this gives me. Thank you! 👍

Reminds me of the Saito powered 4Tec I built years ago. Gotta love the sound of 4 stroke at high rpm.

The king has returned!

I was watching one of your videos when I got the notification for this one

Wow, just wow 🤩. Great video!!

Yay ! Johnny's Back Again ! ! !

That’s freaken awesome, I need one now

Man check out the detail on this thing! This is sick dude 😏👍✨

You are incredible what you do is just great🤩I watch every episode and I just think it's cool what you're doing👍✌️

Also, I can't say enough about your fabrication skills. You are definitely a God in the RC game. I was just talking about my old Traxxas E-Maxx (yeah, I know, ewww...electric motors), but it had dual 12 turn Titan 550 brushless motors, a full RPM steel chassis, RPM unbreakable chassis arms, steel driveshafts with a steel center section and spools in both diffs, matched 7 cell Li-Po battery packs, and steel counter gears. It also had aftermarket shocks and springs with 100 weight oil and aftermarket wheels with the soft knotty tires and MAN did that thing move. I put all new Tamiya servos on it and it would go anywhere. I also had an all aluminum linked rock crawler that was so much fun to play with. I did have a few nitro cars as well, but back in those days it was big money to get a controller and receiver that was strong enough for me to go fast and still have control at further distances. I'm sure RC technology has come a long way since then, but I had close to $2000 into my E-Maxx. When I moved my cousin sold mine without telling me and I was just screwed.

I never cease to be amazed at all the different skills this guy has.

That is so sick bro 🔥👍✌️

I love and watch everything you put out well done as always but im waiting on that holy grail 3 rotor build thats going to brake the internet lol 😉🤔😙

I have actually watched every single video on this channel and I’m proud of it

What a gorgeous sound!

When are they going to make a OHC I6 engine tho? (Preferably DOHC) That would be the holy grail!😌🙏🏾

What a great way to start my Sunday!

Φίλε μπράβο εισαι πολυ οργανωμένος Σε παραδέχομαι!!!!

I did not know that you could face a square piece, thank you very much for your contribution!

Thats a rare chassis you put that motor in. Oh love your work btw❤️

Nice! Some rc specific things to consider Stiffer springs Thicker front diff fluid Stronger/faster servo Gyro on steering for filming purposes, makes it easier to drive and film at same time Love to see the updates!

Great!! Have also enjoyed & appreciated you vids ; ) Looking for to the day when I've developed my nano plasma ion drone for a quarter mile. Have fun, stay safe & take care ; )

Sick as FRIG bro 👍 makes me wanna build one

That’s really impressive 👏🏼

Amazing skill and craftsmanship as always!!

Its unreal how good this motor have Been improved

Amazing work!

The 1/4"-28 thread on the crank is a common standard on 2 stroke nitro model engines. This looks a lot like the "OS" style crank output standard used on smaller nitro engines as opposed to the longer more common "SG" style used on most .21 cubic inch (3.5cc) and larger engines. I guess they tried making it more compatible for off the shelf clutches. The thread on most nitro glowplugs is 1/4"-28 as well.

What a beautiful mini machine!

I know a bloke who would absolutely love that. I'm sending him the video now. Big Alfa Romeo fan

That engine is BOSS! Also I’ve really enjoyed watching your self made RC car build videos. Thanks for sharing them. WOW the rpm is massive. Are you going to modify it with a turbo or supercharger?

love the alfa 155 body, good work JQ!

That’s awesome presentation 👍

that little engine sounds beautiful

Love your work 🇿🇦🇿🇦🇿🇦👌

Happy new year Johnny

Actually sounds badass, despite being tiny

I love how it can do donuts and be grippy at the same time.

أستمر يا مبدع

Love, Love, Love !!

Awesome video 👏

I like how you made a cool fast rc with it and not a slow crawler

Superb work my friend

It looks like the exhaust is boosting it 😎

Gotta love it when the engine screams!

This is already high level of proficiency and technicality. I really salute you JohnnyQ90! What I can do only is for cardboard toys. LOL!!!

This is the car with the best sound . And it looks so amazing

Pretty cool setup. I love the mini radiator. I don’t see the desire to have this though when you can get off the shelf RTR that run 60+ mph for less than the cost of the engine in this video.

12:40 your own road tests even show this thing to be way more powerful than the dyno claims it is. That dyno needs a complete redesign.

Beautiful engine!!

Very good I love videos like this I have the mechanical know how but unfortunately I couldn’t work a PC or CAD for love nor money well done

Good job man

Wow that's awesome😮

Sick!

Love that watercooling tank

Johnny, Love the cars you build and the content. Question. Have you had any problems running the L400 - Common crankshaft problem in particular or is it ok? Building a 1/6 th scale hotrod at the moment that this is in and i want the engine to be right before I run it. Thanks

Man your a RC Wizard!

It shreds!

Love the front of the engine reminds me of the legendary 2jz

With those temps and that performance, you definitely can lean it out more and it will clear up significantly

This things sounds like a tiny ducati, I love it

Very well done sir. Kindly make a bike using these type of engines.

From what I see, it's a huge improvement in the chassis/RPM/confort on road. It look like this version have less torque but higher rpm open door to better speed and better handling with gas management. The only bad point is.... How could they don't so bad looking ? It's look like a school module more than a very cool small engine Ith water cooling 1nd camshaft... Did you plane to open it and improve it ? Or mod it for better looking 😇 Continue this way it's so cool ! Cheers 🇲🇫

Added a suction fan above the radiator to help cool air to leave more

Can't wait for the supercharger vids

Hope you'll be doing RCairplane or rock crawler project soon!!

2JZ miniature beautiful!!

Those results are cute

I have been saw intresting videos when i new subscriber like 2018