I learned 100% more about RC cars in the last few hours than I did in 60 years.👍

I love that you guys are having a blast doing your hobby and showing people how to make their machines the best. Your machine is running super smooth and you are the best in your trade. I’m sure people are looking up to you.

We need more of this now ASAP Let's get it going

Thanks Cody and Paul. I will put this into practice with my Losi 8 and Hyper 7

sweet cant wait to see this thing in action during a race good luck to Cody at the races hope i can watch one in person someday.

Excellent tutorial. Very simply laid out.

This is the best quick tune vid I have seen thus far... I tuned my werks engines in both my hot bodies d8t &my losi 8ight 2.0....this vid has both my cars running top notch thanks Cody!!!!!!

thanks for the reply I'm sure you are pretty busy hope yall are having some good races.

i attempted to run and tune my first nitro on my own with prety limited success , so i youtubed for vidios to help ,i watched many vidios till i found this 1 and after watching i went out and straight up tuned it up like a dream within a few miniutes , now i hav a inferno and inferno st and madforce nitros ,kyosho!! thanks guys.

Hi cody and paul ive just got my new kyosho mp9 tki3 and i love it.

WOW that thing's a beast!... Nice track too, I dig the big jump.

thank you for the video made it so easy to tune my nitro buggy. My first tune took me 30 min. :D

great breakdown

Car sounds awesome dude well done!!!!!!!!!!!!

Thanks for the info. Having trouble starting up my losi nitro truck. Might be the glow igniter. It''s a cheap one and doesn't seem to hold its charge

The Reds carb is composite, but the entire internal assembly is aluminum, including the low speed seat and slide bore is all one piece. I am duly impressed with the quality and consistency of the Reds carb.

Ok yeah i will tighten it more thank you for helping me out. Im into this sport two years now and still learning everything i can man i bet ive watched this vid 25 times now i just love the way that thing is tuned is that the 3 port or 5?

the stuff around the fuel tubing is heat shrink tube.. we use that in order to keep the fuel line from cutting if someone lands on top of you (affectionately known as waffle stomp). If your filter is leaking, you need to use two pairs of pliers and cinch that dude down. The stuff on the needle housing is silicone sealant.

Great guide !....thanks very much

yes.. it's good. We only use it for the first few tanks to get the initial polish on the piston sleeve, then it's up to you if you want to use it..

Yup Paul and Cody rock, Paul knows his needles and engines that's for sure.. Learnt a lot from them overall, I've just moved to reds racing team tuned engines as did "they" ... Awesome vid..

Awesome AWESOME video man. I have an Orion crf engine. Can I use os plugs ? I can not find orion plugs

that particular pipe was the Orion 2058.. it works well for that engine, and it's EFRA legal for use in Europe or International competition. The bigger horsepower pipe is 2013.

Unfortunately u r far sir.. if same country , surely I will meet you and help me to tune up..... happy to watch ur video.... wish from batam.

yeah I saw where he switched pretty sweet looking engine! i gotta ask how do you like the composite carbs because ive always had great results on the full aluminum body carbs or does reds have a full alum carb?

Good clear and to the point. I agree with your video. I am a mechanic that deals with carbs all the time and this is just the same as a full size carb. These ppl that don't agree need to stick to efi fuel systems

Kyosho has some nice entry level cars.. it's the Inferno Neo line, and they also have a truggy that's decent, the Neo ST.

Excellent video

Awesome cool vid!! I love this rc😎👍 I liked and subbed your channel ★☆ From🇯🇵

Good tuning guide. I think a lot of people get hung up on numbers and whether it's temperature or counting turns out on the lsn or hsn or having a .7mm idle gap, etc.... forget all that and tune for performance and use your ears and eyes to tell you if you're on the right track... which is essentially what they are doing here.

I used to only read beer magazine, but now I drink beer and read Velocity RC Magazine.

Brushless has it place as well as nitro, gotta have both :) Nitro =sound, smell and better feeling of a 'proper model' Electric= quiet, clean, convenient and relatively hassle free

Great tips...many thanks!

Great guidance -thanks!

cool info paul! good vid!

Thanks guys! its good to take it from the Pros...

well there went that piston and sleeve cx

I have seen and herd the werks b6 pro engines matched with either 2013 for a smoother power band or 2058 for a bit more on top end power werks pipe I currently run the os .21 xz-b speed spec 2 but really not that big of a jump from the os xz-b max blue head from what ive ran. You will get great torque and rpm out of all the engines i mentioned.

Awsome help good looking out

Braaap. Do a vid on the r5t my next beast

I think this is 5 port, but can't be sure. It's been awhile since we did this and we run completely different engines now. Cody uses Reds Racing engines, designed and built by Mario Rossi..

​​​​​​​Do you know if there are any other manufacturers cvds' or driveshafts that fit the MP9? I am looking for other Manufacturers cvd kits or driveshafts from other manufacturers that fit the MP9 wheel axles. Thank you

Nice vid man, I've always thought those engines look like a piece of art (never got to see one in person yet though) have a few questions about it. How's tuning it, how's it hold a tune, and will it fit on a Revo with slight modification or does Team Orion make a engine for the Revo?

keep going doing a nice job

Hey guys, I just got in the nitro Inferno, I was wondering where I can get an electric starter for it? I noticed that you have one on yours. Great videos keep up this awesome hobby!! guys thanks

Great information.

You guys inspired my interest in tuning, car sounds swwwweeeet. Have a look @ my vids and let me know what you think of my Hyper SS nitro buggy I am still tuning and breaking in

The starter box was made by a Japanese company called S-Point. We are still trying to get them imported. They are carbon laminated fiberglass, and very light for traveling.

Guys you forgot to mention the right glow plug selection for right condition of weather which is an HUGE impact for reliability against cut out's on the track!

What is that around your fuel tubing to keep tight and i noticed some seal around your main needle housing if you dont mind me asking because im getting bubbles before and after the filter thanks.

hey paul old post i know but one of the best if not THE best nitro engine tuning videos out there still!!! I was just wondering what the shock piston/oil/ bladder settup yall are running in this video because this is a very similar style track I run and I'm driving myself bonkers on to trying different oils and pistons Im currently running front 1.3 8 hole kyosho pistons with associated 42.5 oil and rear 1.4 angle 8 hole pistons with 32.5 wt associated oil.

fanks for the help people av got it running now bludy good engine would recommend

tearing it up that is a fast buggy

what are those shock absorbers like the screw ones cuz i have the ball one. and i wanna get the screw one but i dont know what it is called

how many laps at high speed and at low speed you on this engine ? has the same engine myself

thanks guys

Hi im new in rc nitro car hoby.i just bought habao hyper 7 tq2 and is a real pain in the ass to start.I saw on internrt starter boxes and i would like to know do you need to replace the pull start system with soomethig or i just leaved there.(i have COPS start system)

Thanks for the tips, that car has way more jam than mine and a good driver doesn't hurt, lol. Cheers

@vrcmag Hello! What is the song used in this video? Thank you!

I notice 90% of videos never tell how to set up the carburetors from closing the high speed and the low speed all the way in and detailing how many turns out the carb should be to get a base to start with from scratch.

Nice vid. Hi lm looking to buy a new kyosho mp9 tk13 never own one before. Are kyosho buggy any good any help or tips please.

fanks pall thats wat a dun but fanks for the help mate cheers a got the engine going runs well

basically you adjust the screws to get the best performance but at a optimal and stable temperature jfc.

How can you tell what year your vehicles are? I know they are between 2000 -2006 I'm not sure what make they are either. I inherited them.

What would u two recomend for a beginner 4 wheel drive buggy

i read that you should put a filter on the exaust side becasue it keep cool air going into the tank and help car run better.. is that true?

Kyosho has a big focus on R&D and quality control, that's why the cost is a little higher. Everything is made in Japan for the MP9, and you can feel that quality after you own the car for a little while. The materials and QC is second to none.

I am just starting back out in the RC car side of things a had one when I was in school but it’s been a good couple of years since when the engine is run in how long can you typically run them fore before letting it cool down

If you are looking for some wreckless engines to put in a buggy then you can go with. novarossi keep off .21 7 port, orion .21 crf 5 port factory tuned, werks b5 pro, alpha a852 lutz(accidentally put it in the other post should have been the 830 dragon), these are just a few .21 engines there are also a bunch or bigger displacement but if you are going to go racing one of these are the prefered engines. if you are willing though i would totally recommend the os speed .21 it is a bit expensive

i need a starter box..easy start im tired pulling..

THE ULTIMATE SECRET FROM WINNER RACER!! In all the videos I've watched about carburetor adjustments for nitro rc engines not a single one talks about the secret I'm about to reveal to you that makes the difference between first, second and third on the podium. The low speed must be adjusted richer than normal but the motor must still turn well between 1/4 opening and 3/4 because the needle in the center of the slide controls from idle to 3/4. From 3/4 to full trottle you can put the slide needle in your pocket and it wouldn't change the mix. The result is that when the engine is running full throttle and you release the triger quickly the engine wants air and fuel but the slide is closed so a lot of gas (and oil) goes into the engine and cools it down and lubricates it better. Think about this.. How many seconds do you keep full trottle in a race...2 or 3 seconds.. then you can adjust the high speed needle leaner than normal and gain rpm and horsepower and by releasing the trigger very quickly for a fraction of a second like before entering a curve it cools much more and the temperature of the engine will not have time to rise above 250 degrees and you have maximum power.

loosen the glow plug and if that doesnt work well tell me

Amazing...👍👍👍

yo you should do another one

4:25 flame from stinger :))

Nice !

anyone know the music??

what model of kyosho is that ?

Which exhaust pipe are you fellas using?

hi dudes thanks and congrats to ur work. keep rocking... pls clarify me how to tune my nitro buggy to high speed,im using novarossi pro engine with 4.5cc,scale:1/8 buggy.

Can't wait hit ill I get mine 2morrow I ordered 1 day ago the same one for 650$ omg

Nice

av tryd that mate still wont turn over its realy tight

What's the song at the end?!?

What starter box did u used???

I used to read Word Up magazine, but know I only read Velocity RC Magazine.

I took my ansmann out for a run on some dirt today,and when i break it cuts out and its not running right but with everything i know on a rc car thats one thing i dont know how to do (tuning)....

Does it sound like it's rich? Leave the ignitor on while you get it going.

cool video. thnx

Yo what did you put on your gas tank on your RC car?

what is the band and song used in this video?

The buggy is a little more because it is expensive to make a higher quality buggy with better materials, all made in Japan. If you buy a different car and try to bring it up to the level of this kit, you will spend more money. (not to mention the shocks are the best in the industry)

hi a just bot a novarossi 4t buggy and am having problems starting it the piston keeps jamming and at top dead center almost like its ceasing up av ride every fin av bean told still not a bull to turn it over any fine you could suggest fanks would be gratefull ..............James

thanks Shane ;)

can anyone tell me how to identify my Ofna model ? it has a purple motor and green wheels and a white wing.

not to mention the mp9 design has not changed a whole lot from car to car because its platform is just so stable and so proven.

I've got some questions to ask I've got the same engine as yours?

I bought a used Ofna lx with k4.6 engine. The buggy couldn't run on grass at all, it lacked power. On pavement runs fine. I dont know whats wrong😭

try to heat your engine up if this is a new engine we are talking about here then your engine sleeve needs to be "broken in" just run your engine slightly rich at around 200f for a gallon or 2 and you should be fine. just make sure you warm up your engine. if this is a problem and it still gets stuck loosen and i say only loosen the glowplug a bit just so you can relieve the engine from some of the compression.

Any tracks for nitro in northern California can't find anything