p po😅p

Same to same😢😢😢😢

theres lots of engines with the same size that actually works, toyan, cison and lots of business that create working engines powered with gasoline or nitro

Or piston rings

Gotta love it when people can't tell the difference between an actual engine and a toy model........

No crankshaft bearings either. Why bother?

same though

😅😅😅😢😢😢😢😢

Well, the title does say model, that should give you a massive hint on what this is

@@cplcabs some models run

@@goose-the-gamer if you put an electric motor in them. There are also miniature engines the size of the one in this video and smaller that run, but they are not called models. A model engine is not a real engine.

There are model-diesel engines, but they run on a petroleum-ether-oil mix. Some can apparently run on pure petroleum/oil when warmed up. They also do use a carburetor, and therefore are actually HCCI (Homogeneous Charge Compression Ignition) engines, not true diesels. Since they are pretty reliable once you got the hang of tuning them correctly, especially if you run them WOT all the time, they were really popular for model airplanes in the 1950s-1960s.

ukposts.info/have/v-deo/soh0e6-Aq6mYsqc.html

@@VintageTechFan Model diesel engines run on Kerosene/ether/oil mix, not petrol. Keep in mind, too, that all those methanol powered glow plug engines are also a form of diesel.

@@tedsmith6137 Confused the terms here, german word "petroleum" is more or less kerosene. And nope. Glow plug engines aren't diesels. It's a common misconception, but they do not fire by compression but rather by catalytic process on the glow element, which contains platinum/rhodium and sometimes other noble metals for this reason.

www.youtube.com/@johnnyq90

Welcome ❤ukposts.info/have/v-deo/q5GSoqyEeYWDs2w.html

Yeah I remember that. It actually had lights to simulate plug firing.

I built the visible Wankel engine too. Ahh, fun memories.

Thank you very much!

Welcome ❤ukposts.info/have/v-deo/q5GSoqyEeYWDs2w.html

but have you seen the latest video from donut media?

but have you seen the latest video from donut media?

Is this fake?

That's what I was hoping for.😮

Where do you see it called a V4

He just says 4 cylinder, no where does it say V4

ukposts.info/have/v-deo/q5GSoqyEeYWDs2w.html

​@@mr_bear6362йййиа

ukposts.info/have/v-deo/q5GSoqyEeYWDs2w.html

I actually thought he was gonna start it up, too bad it's just a metal model. I saw the real miniature v8, that was awesome, except for the price. $1600

It has been done but more so the old design used it ships. The big exposed conrod single or 2 piston style.

You could do it two stroke. Early railroad diesels were done th is way.

What you need is skill not a watchmakers lathe. A watchmakers lathe will be ill suited to it (I've got 22 lathes at the moment so can comment on the relative merits lol) Any small lathe will do, i.e. myford or maximat.

I skipped though and the moment I saw the radiator (where I skipped too) I knew it was fake. The filter, pump and injectors were all blank casts not to mention you can't run a common rail diesel without an ecu to control the injectors or run high pressure fuel through flimsy rubber tube. Might have been more believable if they used the old style injector pump and fake hard lines.

No piston rings either.

Its........a..........model..........

@@TAZ95C4 it's a shit model

@@liamcooper5202 much like your comment......

@@TAZ95C4 so cool, must you be. Take all your brain cell, it must. Drop kick, you are

En realidad no deberia de ser un motor de inyeccion electronica, te das cuenta por el formato

كيف

الو

Wlc ukposts.info/have/v-deo/q5GSoqyEeYWDs2w.html

No le puso metales de cigüeñal, solo por eso ya no es un modelo exacto

👀👀

Replica you say... think you will be hard pressed to find a push rod common rail diesel without any injector control.

Comment just saved me. I was about to buy it

​@@Livenewme Could have just viewed the last minute to see it's electrically powered, even has a little switch

@goobie87 we shall name thi ‘Hater’

Nothing great about all you have to do is follow the instructions and put it together

たあなさなみ

كيف

Wlc plz ❤ukposts.info/have/v-deo/q5GSoqyEeYWDs2w.html

A কিছু কা

Welcome ukposts.info/have/v-deo/q5GSoqyEeYWDs2w.html

Did you need 20 min to understand that?

There is a chance it will run on nitromethane

@@migueldenboer5186 no piston rings and all that clearence. I bet 40 hp 😂

@@migueldenboer5186 Alright, I am going to try and be nice here. Your statement tells me you know little about piston engines. First, there are big oval holes at the bottom of the cylinders. So, we would need sleeves to fix that. Next, there are no piston rings. Gotta fix that. No working fuel system or ignition system. The list goes on and on. I have been working with miniature airplane engine for 65yrs, glow, diesel and spark ignition, so I have had a little experience with the subject. PS. The oval holes in the cylinder's would work if this were a model of a 2strok Detroit diesel engine. But then you must have a supercharger to bring fresh air in and exhaust gases out. 'Nuff said, my fingers are tired.

@@ktmturbo5836 I guess I wasn't believing what my eyes were telling me. I was hoping to see a real working model of a diesel engine because I would buy one in a heartbeat. I have become gullible in my old age I guess.

Thank you!