DIY WiFi / Bluetooth Stereo Speaker Boombox Build

3 роки тому

Speaker available for sale 👉 etsy.me/3SAnJZ7
✅ Up2Stream Amplifier - bit.ly/3TiYWI2 / bit.ly/3wZBmbS
✅ Free build plans, in-depth instructions and more - bit.ly/4c7CPx7
Dayton Audio TCP115-4 woofer - parts-express.sjv.io/Zdk2zQ / bit.ly/3VeyLVC
Dayton Audio TD20F-4 tweeter - parts-express.sjv.io/n1Oavo / bit.ly/3TnBium
Parts:
2X 26mm ID (7/8") port - parts-express.sjv.io/QyAYaP / bit.ly/3wyaI9R
Crossovers - bit.ly/3x5PRXg / geni.us/vw2q
DC 24V 5A power supply - bit.ly/3GgmWoK / geni.us/zAiyC
Remote Control - bit.ly/3Qhp1W7 / bit.ly/3vChcRt
Rubber feet - bit.ly/3IjqU2z / geni.us/E2PU4
3mm LED mount - bit.ly/3WLxL9o / geni.us/4DaPp
M4X25 standoffs - bit.ly/3vbI9Pq / geni.us/HeaOo2I
M4X12 screws - bit.ly/3v6OKER
2mm clear acrylic (100x200) - bit.ly/48EZiPb / geni.us/E3RxN
Tools:
TS101 soldering iron - bit.ly/3HUzrI9 / geni.us/owyDm5G
Cordless drill - bit.ly/4bZg5PN / geni.us/A5AZi
Hot glue gun - bit.ly/43nyFNx / geni.us/1dwxqIM
Drill bit set - bit.ly/3S3i6zC / geni.us/ktAK1M
Hole saw set - bit.ly/3YZU8tg / geni.us/hONP
Center punch - bit.ly/3xslc8u / geni.us/o5WBEwB
Wire stripper - bit.ly/3T1pVrO / geni.us/6epIs
Step drill bits - bit.ly/3Pe3fU6 / geni.us/xYRx7J
Jig saw - bit.ly/3uWmric / geni.us/D8GC
Orbital sander - bit.ly/3HBOC8O / geni.us/gHqu0W
Wood router - bit.ly/3I7Aplm / geni.us/6okRl
Router circle jig - bit.ly/3P5B75e / geni.us/JvCvO
Flush trim bit - bit.ly/43ggzfH / geni.us/bZRVci5
Forstner bits - bit.ly/35snpjW / geni.us/F6it
Helping hand - bit.ly/3B9mIgt / geni.us/Yyqyte
Hi!
Thank you for checking out one more project of mine. Hope you like this one! Full build plans, parts and tools lists are located in the next steps!
This time I decided to make a non-battery powered speaker that would mostly be used in my living room. I went for veneered sides and a faux leather wrapped front panel. To my eyes and ears the speaker turned out great. I really dig the wood-leather design that got me inspired when I saw the Focal Aria 906's.
Thanks for watching!
- 𝑫𝒐𝒏𝒏𝒚

КОМЕНТАРІ: 584

@warriordrum 2 роки тому

Nice design evolution/variation of the mk boom. Love the leather. I always thought these need small legs rather than rubber nubs. Gorgeous work!

@DonnyTerek 2 роки тому

Totally agree! Thank you a lot!

@leojoyalep 2 роки тому

The craftmanship is amazing! Keep up the good work 👍❤

@dextertracycanete9234 2 роки тому

Beautiful. I'd prefer the tweeters to be on opposite sides and far apart though, so as not to lose the stereo separation.

@jimsdad3739 2 роки тому

Bluetooth does transmit stereo does it?

@Mr.Engine993 2 роки тому

@@jimsdad3739 yes it does

@OmerTheGreatOne Рік тому

It is a mono bluetooth reciever: 8:58

@analizator82 Рік тому

@@OmerTheGreatOne Up2Stream Amps are capable of both Mono and Stereo. This could easily be made stereo and only difference would be making a pair of crossovers and few more cables. I'm not sure one on video is mono tho, part list shows 2 crossovers so that could mean this is actually stereo setup.

@euroshopperbier1337 Рік тому

you will never get stereo out of 1 small box. Maybe if you tape it to your face..

@lumostoria8512 3 роки тому

Hi Donny, very nice build! Question regarding the remote control: Does it work through the plexi at the backside of the box? I finished my first boombox last week, using the Arylic Up2stream Amp 2.1 board. The board has a 9pin breakout connector where you can connect an external IR sensor. I used a standard LED-shaped one with 38kHz 940nm and put it in the front panel. Works perfectly.

@DonnyTerek 3 роки тому

Hi! Thank you! Glad you liked the video. Yup, the remote does work through the plexiglass. Though I didn't check on how far the remote can still work.

@kalleklp7291 Рік тому

Nice job! :) 2:50 Correct use of a hole saw...drill from each side to prevent tear-out. I like that leather look for the front. It really gives the whole thing a professional standard look.

@DonnyTerek Рік тому

Thank you a lot!

@alanasmusichd7482 3 роки тому

Those two tweeters in the middle don't give wide stereo, but great build as always 👍

@dizzze 3 роки тому

They dont give stereo at all

@DonnyTerek 3 роки тому

Thanks! The speaker does sound great as a center speaker as I intended it to be. I could have mounted the tweeters on the sides of the panel but did not want to keep a blank space where the amplifier goes 😄

@xluumu 3 роки тому

@@DonnyTerek If you are using it to play a single channel, as in a center channel, using two tweeters and two midranges does not make sense. A single tweeter and a single midrange would sound much better.

@wynton416 3 роки тому

Not only that. I don't think this guy heard of comb filtering. Good build though.

@dizzze 3 роки тому

@@wynton416 exactly

@MarkoVukovic0 2 роки тому

What an awesome build, thank you for sharing!

@DonnyTerek 2 роки тому

Thank you!

@azlirameliasdasilva4662 2 роки тому

Vídeo extremamente satisfatório. Parabéns pelo projeto...

@DonnyTerek Рік тому

Thank you!

@Colleen-Pearce 2 місяці тому

Seeing you can always warp the enclosure with leathers perfectly, that blown me away

@copetimusmaximus3363 2 роки тому

Thank you for the video, shows how to make and decorate the speaker boxes in detail. Couldn't find the schematics following the link. Another thing, for a stereo speaker it is a bad idea to place tweeters one right next to the other, this way there will be no stereo effect.

@TheSpotify95 2 роки тому

This is a pretty neat little speaker build! One of the best ones I've seen. Good job. Only thing I might have done is added a battery pack, so you're not tethered to a 24V DC power supply.

@DonnyTerek 2 роки тому

Thank you! I did consider adding a battery pack to make it portable but since my intention was to only use it inside, powering it with a 24V supply is convenient enough. It also saves some space and overall dimensions without the battery pack.

@idrisjones1453 2 роки тому

@@DonnyTerek you could do what I did . By using my 18v cordless drill battery externally via a 3d printed battery adaptor ( plenty of choice for most popular brands) use an in-line fuse & terminate lead with your specific power plug. & Job done it's portable, you will lose a little output power due to the lower 18vdc input.

@DonnyTerek 2 роки тому

@@idrisjones1453 That is a really good idea. Being able to use a single battery pack for other devices other than power tools is great. The speaker would look a bit bulky with the battery on the outside but at least it would be portable.

@robertjansen788 2 роки тому

@@DonnyTerek you can make a flat little space on the back for a flat battery pack, it is not that much effort. look at the soundboks (GO)

@titothoya1618 3 роки тому

Workmanship is top notch

@DonnyTerek 3 роки тому

Thank you!

@kotogray8335 2 роки тому

Great job, but you already know that! Love the way it looks and with 100 watts I'm sure it sounds nice too

@muhammadfazaputra Рік тому

Jack SPeaker tv

@stevefick3919 3 роки тому

Very nice! You are a great cabinet maker. As always, patience is a virtue!

@DonnyTerek 3 роки тому

Thank you very much!

@justsomeguywithsunglasses1876 Рік тому

The speaker sounds very clear and balanced, it also looks good. Good job!

@DonnyTerek Рік тому

Thank you!

@RW_CreativeMedia 2 роки тому

Damn, this was beautifully handcrafted, you should start making these for sale.

@DonnyTerek 2 роки тому

Thank you a lot! Will try making a few more in the near future.

@sailegifted6960 2 роки тому

I also agree friend, This was amazing!😍👏👏

@user-sq1st1wk5f 3 роки тому

Молодец! Работа которая стоит уважения!

@DonnyTerek 3 роки тому

Thank you!

@MsCbmc Рік тому

Love the speaker and your work...attention to those little details...awesome. You really inspire me.

@DonnyTerek Рік тому

Thank you so much! Truly appreciated.

@gaarcemail Рік тому

Dam! even through my tv, this sounded amazing. The bass sooo good to the ears, no distortion, sharp and strong, just beautiful.

@DonnyTerek Рік тому

Thanks!

@anzonventuresaccount 2 роки тому

Seriously classy job Donny. Enjoyed watching you build it.

@DonnyTerek 2 роки тому

Thank you very much! Glad to see you enjoyed it.

@robertsoncletokoerner7012 2 роки тому

Parabéns, belo trabalho e ensinamento. Obrigado. Robertson (Brasil)

@DonnyTerek 2 роки тому

Thank you very much!

@0u1canc1v1c 3 роки тому

You do this job very well, perfect

@DonnyTerek 3 роки тому

Thank you!

@vijaykumar-np8qq 2 роки тому

A perfect example of superb creativity...nice sound machine. Love you from India 🇮🇳 ... thanks

@DonnyTerek 2 роки тому

Thank you so much!

@ZhuzikBer 3 роки тому

Great job, as always! 💪🏻

@DonnyTerek 3 роки тому

Thanks! Appreciate that!

@DaytonAudioOfficial 3 роки тому

Thanks for including is this incredible build Donny!

@DonnyTerek 3 роки тому

Thank you! My pleasure!

@jaisinghdhaliwal948 2 роки тому

pls export some more models to india. diyaudiocart.com have limited stock.Most are out of stock.

@3DLA92 2 роки тому

Sensacional muito top 👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷 quero uma dessas 😂

@PAPABEARCRAFT Рік тому

Beautiful! Beautiful project, beautiful result and beautiful video. Well done.

@noahlubach8636 8 місяців тому

Hello Donny, very nice build, but I wonder, do I have to use the expensive Up2Stream Amplifier Board or can I use the AIYIMA TPA3116 ?

@DonnyTerek 8 місяців тому

Hi, thanks! You can definitely go without the Up2Stream board, even though it is a great amplifier board with BT and WiFi connectivity. I'd recommend you go with this amp if you're looking for a simpler option: bit.ly/3qjMpJV

@pedrogomezvazquez5606 Рік тому

Excelente trabajo! Podrías indicar cómo se realizan las conexiones del amplificador con los altavoces a través de los crossovers y también cómo se conectan los tweeters. Muchas gracias por anticipado.

@DonnyTerek Рік тому

Hello, thank you! Had to google translate your comment. The connections are really simple: amplifier-crossover-tweeter and woofer . I recommend you also check my Instructables post in the description.

@marcelohal 5 місяців тому

Muito top! Feito com todo cuidado, dá até vontade de fazer também! Parabéns pelo trabalho!

@DonnyTerek 3 місяці тому

Thank you!

@PartsExpressOfficial 3 роки тому

Awesome Video Donny! We love your speakers!

@DonnyTerek 3 роки тому

Thank you so much! Kindly appreciated!

@povilasrimkus4130 3 роки тому

Amazing build!

@DonnyTerek 3 роки тому

Thanks mate!

@ponsaravanan 2 роки тому

Love your work. Camera does the heavy lifting. Good investment

@ponsaravanan 2 роки тому

Subscribed

@DonnyTerek 2 роки тому

Thank you so much! Should have got myself this camera a long time ago.

@DonnyTerek 2 роки тому

Welcome!

@manuellagotorrealba Рік тому

Hermoso trabajo, gracias !!!

@DonnyTerek Рік тому

Thanks!

@danielj.glowny4108 2 роки тому

Beautifully done two channel boombox not Stereo no space between left and right speakers !

@Mahan150 3 місяці тому

Superb quality and workmanship. Speechless.

@DonnyTerek 3 місяці тому

Thank you so much!

@wutthichaikhattalo1566 2 роки тому

I really like this piece. Is there a wood cutting pattern?

@DonnyTerek 2 роки тому

Thank you! You can find the free build plans in the description of the video.

@jimgiokaris7406 2 роки тому

Great job. Can I ask what is the foam (at 8:43 in the video) that you have rapped around the wires called or where can I get it.

@DonnyTerek 2 роки тому

Thank you! These crossovers came assembled and already wrapped in foam. I'm actually not sure where you could get the foam, I guess an option would be to get some adhesive foam and wrap the cables in that.

@brucemcleer2823 3 роки тому

Do you have a link for the vinyl you used?

@Leo-fh7fu 3 роки тому

This is not a DIY. This is Art.

@DonnyTerek 3 роки тому

Thanks!!

@user-bn8nz8lh5b 2 роки тому

wow ~ 멋진데 ! 이쁘고 소리도 강력하고 ! 수고하셨습니다.

@DonnyTerek 2 роки тому

Thank you!

@leonstclairecoey 2 роки тому

Beautiful, great video. Great build

@DonnyTerek 2 роки тому

Thank you very much!

@nikhilmulay 2 роки тому

Why two tweeters? It would cause a lot of issues with comb filtering. Really good workmanship!

@DonnyTerek 2 роки тому

Thank you! I just wanted to experiment.

@Royal-Doss 3 роки тому

Amazing!! Well done!!! 🙂

@DonnyTerek 3 роки тому

Thank you! 😊

@yotsukelhancker 3 роки тому

Exelente proyecto tendrás las medidas

@anydiything 3 роки тому

what a magnificent work..

@DonnyTerek 3 роки тому

Thank you!

@bassworld1012 2 роки тому

This talent deserves more than 10million views 🙌💯 amazing work man iam gonna do this soon 😊❤️

@DonnyTerek 2 роки тому

Wow, thanks! Best of luck on your build!

@samjose11 2 роки тому

hi Donny, i m really interested in making this speaker, but wanna use a setup that utilises 6inch wooferx2 , 3inch midrangex3 , and 1inch tweeterx2 with a continuos 120 w power output. with a similar amplifier like u have used , but with my specification. can u help me with the cabinet dimensions and its port dimensions?

@See_Sharp 2 роки тому

Will sound like mono speakers as the tweeters are very close to each other. Stereo imaging is about separation of left and right speakers.

@anantkumar8888 3 роки тому

Sir You are best Amplifier makers please MAKE BUDGET speaker box

@DonnyTerek 3 роки тому

Thank you! Will try soon.

@colinclarke9379 2 роки тому

doing kind of a wacky bluetooth speaker build out of one of those old massive lense flashlights with a single 5.25” coaxial. looking for a simple 25-30w mono w/ bluetooth capabilities. any recommendations on where to find an amp board?

@antonbaur2141 2 роки тому

where did u get those exact crossovers??? they arent included in ur partslist :) best regards Toni

@chepepancho2958 2 роки тому

Can I have the name of that foam tape you use to wrap the cables to keep the together/rattling ? Or where can I buy it?

@colinclarke9379 2 роки тому

awesome work by the way! that thing is a work of art

@DonnyTerek 2 роки тому

Thank you very much!

@mr.krunchyarriaga5989 Рік тому

Its Amazing, great job!!! Bro ✌️

@DonnyTerek Рік тому

Thank you so much!

@NightriderZ4 2 роки тому

Wow that looks awesome!

@DonnyTerek 2 роки тому

Thanks!

@ewashem 3 місяці тому

The most satisfying speaker diy video

@DonnyTerek 3 місяці тому

Thank you!

@user-mt5hm1bh1u Рік тому

Gorgeous. Just mesmerizing👏

@DonnyTerek Рік тому

Thank you!

@observenotify8604 4 місяці тому

Excellent beautiful finished. But: for any modern sound box or speaker cabinet, it's not compulsory, but it's much better to have atleast two bass boosting passive radiators of the same diameter of the woofers fitted.

@anthonysilva5312 2 роки тому

Great job! With all that work I probably would’ve sprung on better drivers. Also countersinking the plexiglass in the back would’ve been a nice look.

@DonnyTerek 2 роки тому

Thank you! Did not want the build to go over the roof with the price of more expensive drivers.

@14880evilmonkey 2 роки тому

Daytons stuff isn't too bad tbf Heard some fairly high end sounding systems using Dayton drivers... At the end of the day the amps crossovers and box design play a massive role in a speakers sound

@hifiv3487 2 роки тому

Really awesome job! Did a similar project and included a battery pack so i can charge and use the speaker anywhere. It sounds great however everytime i turn it on, i hear a loud popping sound from the speaker, i guess i will need to put something between the power supply and switch to eliminate the startup popping sound?

@andrewwinch474 2 роки тому

That happens in car stereos if you don’t have soft power to your amp and it turns on quickly.

@ottoman556 2 роки тому

You can solve that problem with connecting huge capacitors between power rails.

@jimsdad3739 2 роки тому

A lovely piece of work.

@DonnyTerek 2 роки тому

Thank you!

@blagorodproduction 2 роки тому

Hi! Will these speakers be enough for a party outside?

@Gach2012 2 роки тому

Как все сделано четко и аккуратно!

@AudioElectronicsChicago 3 роки тому

Well done!

@DonnyTerek 3 роки тому

Thanks!

@anniga69 2 роки тому

Only....Perfect Work

@ProjectWeekend 2 роки тому

Nice! interesting in building one

@DonnyTerek 2 роки тому

Thank you!

@SchmurtzAlex 3 роки тому

Thanks ! How is the sound compared to isetta ? I’ve just made a little speaker with my child from your instructable few days ago. There will be an instructable for this one too ? Are you sponsored by arylic ?

@DonnyTerek 3 роки тому

I can't make a direct comparison to the Isetta now since I do not have it anymore. I would say that I like this speaker more due to the 2-way speaker design producing clear highs and decent bass response. Hey that is so cool that you made a speaker using my Instructable. Yup I just uploaded the Instructable for this one as well. I am not sponsored by them, just testing their boards out.

@DjChrisGroove 2 роки тому

Great work! I wish I could build it but I don’t have all the tools. Can you make one for me? How much would it cost?

@DonnyTerek 2 роки тому

Thank you! I can sell you this one if interested. Feel free to reach me by email which you can find in my channel's description.

@caljazz Рік тому

boa tarde,sou fanático por Jazze e eletrônica ......gostei muito da sua caixa ...meus parabens ,me increvi no seu canal

@DonnyTerek Рік тому

Thank you!

@prasenjitbanik4132 8 місяців тому

Very nice make.what is the size of the cabinet.very impressive

@DonnyTerek 8 місяців тому

Thank you, you can find the build plans in the description with dimensions.

@dennisandreperez2466 5 місяців тому

the title of this video should be how to paste and wrapped 5he wood for the proposed speaker..,😅😂

@tahirhameed-mth1530 3 роки тому

I need that table with cutter, what's brand? Amazing woodwork skills bro.

@DonnyTerek 3 роки тому

Thanks bro! I will try to check the brand of the table saw when I am at the workshop.

@mackyusotayo2903 3 роки тому

Good job as always

@DonnyTerek 3 роки тому

Thanks again!

@gaydarON 2 роки тому

How nice..... that was very satisfying.

@DonnyTerek 2 роки тому

Glad you enjoyed it! Thanks!

@nawazansari4570 2 роки тому

Really impressive. Just out of curiosity though wouldn't acoustic foam or polyfill or even regular cotton glued on inside of the enclosure had suppressed or even kill those standing waves and made sound much better ?

@indioboysdosteclados 3 дні тому

What is the name of this material used to make the box? It doesn't look like wood to me

@jaganmohankonduri7092 9 місяців тому

Good Job. Looking excellent. But I would like to know the speakers and tweeters. capacity you used

@DonnyTerek 8 місяців тому

Thank you. Please check the links to the components in the description.

@playerx7061 2 роки тому

Love from India 🇮🇳😉

@DonnyTerek 2 роки тому

Thank you!

@UmarFarooq-qk9or 2 роки тому

@@DonnyTerek hi

@UmarFarooq-qk9or 2 роки тому

Hello

@mackyusotayo2903 3 роки тому

Waiting for another project , 😁😁😁 free speaker please watching from Philippines

@DonnyTerek 3 роки тому

Thank you!!

@mackyusotayo2903 3 роки тому

Welcome sir Dony

@brianw8715 2 роки тому

Perfect 👍

@GRAHAMAUS 3 роки тому

The tweeters need to be at the outer edges at least, if not angled slightly away from facing dead ahead. This won't give any stereo image at all.

@robertjansen788 2 роки тому

yes but with 2 tweeters horizontally you get lobing issues. if you go to the left or right the distance from each tweeter to your head is not the same and this will cancel out some frequencies.

@kalleklp7291 Рік тому

Consider the cost of the build and that almost everyone with hobby skills should be able to make such a thing. This is not a HiFi speaker costing thousands of $.

@patrickharris4973 6 місяців тому

I always get some relax when I was watching videos like this great job dude take it personally because I didn't like it's really looking impressive and I bet you spend lot of time to build it 👊😎 so keep going forward with it

@JaviersDIY 3 роки тому

this is amazing sir

@DonnyTerek 3 роки тому

Thank you sir!

@ggmt7389 Рік тому

Great job. Can 2⃣ of these work together(synchronized) like one?

@DonnyTerek Рік тому

Thanks! If using the same Up2Stream amp in each, then yes!

@fantastic7231 4 місяці тому

Really best good working speaker bt diy kit.

@user-ye1zi5qu4l 8 місяців тому

Гениально!

@jwinklies 2 роки тому

Basically the most incredible I've seen in my entire life. And I do some serious woodworking. I'm super in to speaker systems too so this is my whole world perfected.

@DonnyTerek 2 роки тому

Thank you so much!

@556andy Рік тому

Beautiful build and video man, I had a question when building one with tweeters can you connect the tweeters where the larger speakers are connected? Or does the amp need 4 positive and negative lines for tweeters and woofers

@joiztv9012 Рік тому

Search for "Crossover"

@softserver1291 3 роки тому

идеально сделано как-будто с магазина

@DonnyTerek 3 роки тому

Thanks!

@HeyDay499 Рік тому

Спасибо большое за видео приятно смотреть

@maxwelloliveira8682 3 роки тому

Parabéns

@kgp007007 3 роки тому

Perfectionist 👍👍

@DonnyTerek 2 роки тому

Thanks 👍

@NmC11 3 роки тому

Nice speaker!!!

@DonnyTerek 3 роки тому

Thanks!

@user-so3xk1lm4j Рік тому

Красиво ! Мастер!

@samjose11 2 роки тому

Awesome design, two such speakers would have been awesome, L + R speaker cabinets and should have lined the speaker inner walls with thick glass wool padding.

@DonnyTerek 2 роки тому

Thanks!