Should electricians assume TN-S and TN-C-S are both PME earthing systems.

День тому

When electricians are working on a TNS earthing system should they consider that it may change to TNCS in the future? This could happen when the DNO, distribution network operator, repairs or upgrades the electricity supply around the installation area.
eFIXX electricians question and answers are selected from comments on our youtube videos or other social media accounts.
📍SUBSCRIBE TO THE CHANNEL
ukposts.info?sub_con...
================================
📺 NEW TO THE EFIXX CHANNEL
Watch our essential videos playlist
• NEW TO eFIXX - ESSENTI...
================================
🎥 CATCH UP ON THE LATEST VIDEOS
ukposts.infovideo...
================================
🛠 ELECTRICIANS' TOOL REVIEWS
• Electricians' tool rev...
================================
🧲 EFIXX NEWSLETTER
Sign up to find out about our live events, competitions and product giveaways.
www.efixx.co.uk/sign-up
================================
📝 APPRENTICE HUB
If you're an electrical apprentice, retraining as an electrician or looking to refresh your knowledge, then please check out our apprentice hub. It contains thousands of multiple-choice questions to help prepare for electrical installation exams.
www.efixx.co.uk/apprentice-hub
=================================
SOCIAL
✅ INSTAGRAM - See our behind the scenes action.
efixx_insta...
✅ LINKEDIN - Latest electrical news and trending content.
/ efixx
==================================
Presented by
Gary Parker - Technical manager - Electrical Contractors Association. (ECA)
Joe Robinson - Technical editor eFIXX
#efixx #morepower #electriciansQ&A

КОМЕНТАРІ: 21

@johnhoward2104 3 роки тому

According to the new EVC CoP, TN-S should be assumed to be TN-C-S unless the DNO confirms in writing that it is TN-S and will always remain TN-S - if not, assume it's TN-C-S!!

@richardwilliamson3624 3 роки тому

Yeah, clear as mud 😂😂

@bartman58 3 роки тому

Clear as mud that Gary....I will stick to using my own common sense

@efixx 3 роки тому

Common sense is the best way:-)

@blower1 2 роки тому

Me: Does this property have a TN-S or TN-C-S earth system? DNO: Yes.

@westinthewest 3 роки тому

Western Power advised me in November 2020 that they don't have records for the earthing arrangements in dwellings. They were not keen on arranging a visit to the property in order to investigate. ESQCR rules must have changed since this video was published.

@seprishere Рік тому

I did ask (as a non-electrician but curious as the on-site arrangement looked a bit like TN-S) but I guess assuming it is TN-C-S is safe and when I did have my EICR (before moving in) the earth loop impedance reading was in TN-C-S bounds. I didn't pursue the matter. I was surprised they didn't actually know though!

@Orgakoyd 5 місяців тому

@@seprishere Does ''TN-S should be assumed to be TN-C-S'' mean the lead sheathing of the cable that comes into the house is joined to the neutral of modern TN-C-S type cable in the street somewhere that takes it back to the distribution transformers star point? Because if the lead sheath is not connected to the neutral conductor at some point then the main earth terminal is not earthed as far as I can tell (other than through extraneous conductive parts).

@ismscsim 2 роки тому

I have a PME sticker on my board.... the earth is bonded to the neutral in the garden from an over head cable landing in the ground. The supply is fragile in high winds. Decided to go off grid and install my own earth. Can a locked mechanical transfer switch or isolator be installed on the consumer side or prosumer as I will be when offgrid? If I am off grid completly then I can up the no. of solar panels without restriction by the DNO. Any info on this is welcome. Cheers

@jessthorn9774 3 роки тому

hi im new to this what what is the bsen number for a switch fuse isolater at 125amp its 4 pole regards jas

@darrenstevens8729 Рік тому

Hi so if a swa circuit is fed from the consumer unit on a TN-C-S earthing system does the remote end of the swa change to a TN-S system

@efixx Рік тому

No, the earthing arrangement is defined by the means of earthing to the origin of the installation not a sub-main. Good question though.

@darrenstevens8729 Рік тому

@@efixx thank you

@faithful5475 3 роки тому

Quick question folks Do we need to earth bond metal beam in a new extension and another one on loft conversion ? Same property.

@faithful5475 3 роки тому

@@sparkymacsparkface7497they are atm but they will be buried with plasterboard anyway

@faithful5475 3 роки тому

No unfortunately it doesn't have

@faithful5475 3 роки тому

Thank you sincerely for your advice I will give them a ring to make sure its correct 👍

@stevensmith4449 3 роки тому

If in doubt Bond it out!

@johncooper5293 3 роки тому

There is no way the DNO can guarantee they haven't repaired a TN-S and therefore you must assume TN-C-S.

@muzikman2008 3 роки тому

The truth is the DNO Don't really know what systems they supply either. 😂 Some Teflon shoulders going on... Ass covering.