Shimano EW-RS910 Di2 Bar End Junction Wiring

Shimano EW-RS910 Di2 Bar End Junction Wiring - How To Guide

4 роки тому

Shimano EW-RS910 Di2 Bar End Junction Wiring If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com/paypalme/freet...
Buy me a coffee
www.buymeacoffee.com/Freetocycle
Show your support via the Patreon page
/ freetocycle
Follow me on Instagram
freetocycle...
info@freetocycle.co.uk
Thanks for watching.

КОМЕНТАРІ: 39

@stevefoskin8764 Рік тому

I've viewed a number of your video tutorials and they are all immensely helpful. Clear, straightforward, and step by step procedures. Greatly appreciate you doing them.

@mstrmke 3 роки тому

This has to be, by far, one of the best Di2 Integrated Cable videos out there - Bravo!

@pneumadeux 2 роки тому

After being a curmudgeonly mechanical and rim brake holdout, I've just now started sourcing components for my first Di2 / disc brake build. Your videos have been so helpful because they are so clear. Thank you! :-)

@stuartkellock3991 3 роки тому

Love it - simple and to the point. This is what people need, no nonsense videos :)

@kondor4920 2 роки тому

Thanks so much! That‘s exactly what i want, and you even gave me the exact modell numbers, so i don‘t have to search around and worry i might buy the wrong thing.

@Blackriver48 4 роки тому

that is one great video to understand what you need and what options you have ! thanks alot

@andrewsmith1110 Рік тому

That's great in helping me with my new build! - Thanks

@kiowa21 3 роки тому

All your videos are top notch. Im looking to do the di2 upgrade by myself and this cleared up a few questions I had, thanks 😊

@bovatecb 4 роки тому

Thanks.... that was helpful!

@hilliardhart2564 4 роки тому

great thanks once again

@albrpgo Рік тому

awesome tutorial

@Plasmo20 3 роки тому

Thank goodness for ETap. Top video though. I am researching for an older racer (Masters) who bought 9150 fitted bike and has no idea .

@thisandthatandotherthings 3 роки тому

For the sake of completeness - you can also plug a Di2 cable from one shifter into the other shifter to avoid need/expense of the y-cable and keep the four port JC41 at the bottom bracket (joining cables FD, RD, BT, STIs via 910)

@charliewhelan9488 2 роки тому

Is the cable definitely long enough?

@leeomurchu1213 8 місяців тому

I was just about to comment. Can you run a cable from left to right then right to bar end unit then bar end unit down to 4 port junction at down tube. Cheers. 👍

@thisandthatandotherthings 8 місяців тому

@@charliewhelan9488 to clarify the 4 port junction has cable links to rear derailleur, front derailleur, battery and a "daisy-chain" cable. The daisy-chain links the STI levers but you also inline the charge/indicator/setting port and wireless module for that generation of Di2. As those components often come with their own cables, and you can buy lengths of cable separately, then you can get it to work length wise.

@renezweers6352 3 роки тому

I have the following setup: from NDS shifter internally to junction box A, DS shifter to JB A, DS Shifter to downtube/junction box B. This only works when you have no additional shifters of course. This setup doesn’t need any additional splitters/junction boxes in the handlebar

@SFniner415 2 роки тому

So when connecting the wireless unit in the second method, there is no longer the need for an additional 150mm wire, correct?

@fendyajah3747 3 роки тому

I use ew-rs910 can u guys tell me what wiring should i use??

@rogaty_kolarz Рік тому

I have older di2 in my bike - ultegra 6870, battery is SM-BTR2. Will these two components EW-RS910 and SM-JC41 be compatible. I would like to have control in the handlebar instead of under the bridge. Thank you

@yuzeiryyusuf 3 роки тому

Hi, i am wondering to Di2 the bar end juction box with ultegra 6870 shifter that only have 1 port. 6870 shifter is cheaper so i thought i could compensate with extra Y split wire? Will it work?

@FreeToCycle 3 роки тому

The RS910 bar end junction is compatible with 6870 shift levers.

@manuelcalleja92 4 роки тому

For your last method are you saying you need 2 junction boxes (SM-JC41)? One in the stem/in handlebar and the other in the bottom bracket area?

@davidlopez-fe2lb 3 роки тому

Yah, that's what he was suggesting. This method makes the most sense to me, as you'll need to plug in four parts to function properly, left shifter/right shifter/bar end junction box/and bottom bracket junction box. So the SM-JC41 would be taking in all four wires into itself to pass all the signals to the proper parts. Hopefully that didn't confuse you more than it was helpful.

@charleytraylor8859 4 роки тому

Is the wireless unit WU-111 required? I don't need or care for the wireless feature but it that the only way to complete the connection?

@FreeToCycle 4 роки тому

The WU-111 unit is an option it is not required for the system to work!

@dwaynepedals 4 роки тому

Would you need this cable if you are running a 1x Shimano GRX setup?

@FreeToCycle 4 роки тому

Which cable?

@dwaynepedals 4 роки тому

Free To Cycle Sorry the JC-130 Y splitter cable

@FreeToCycle 4 роки тому

If you want to use the bar end junction port then you can use the Y Splitter cable for the GRX 1x11 setup!

@JokkeJonko 3 роки тому

Is the rs910 compatible with utlegra di2 or only dura ace ?

@FreeToCycle 3 роки тому

Yes the rs910 is compatible with Ultegra r8050 or r8070 Di2!

@JokkeJonko 3 роки тому

@@FreeToCycle big thanks!

@oMrSandMan 3 роки тому

Thanks you for the tutorial! But I have a doubt, in scenario number two, I understand that 3 holes are needed in the handlebar, is this viable for a carbon handlebar?, I think it would compromise its mechanical integrity. Thank you!

@FreeToCycle 3 роки тому

The diagram would be fine for alloy bars not carbon, unless they came from the factory with the hole already there!!

@oMrSandMan 3 роки тому

@@FreeToCycle Thank you for the response!

@RoquetteAttaquer 3 роки тому

How about the venge? Which one should i follow? Shimano components so complicated and i hope shimano release the wireless group set in 2021 haha

@masterblade8176 2 роки тому

Good video Bro! Can you tell me the lenght of the cables for frame with this measure: HANDLEBAR: wide= 42 cm; drop= 13,2 cm; reach=7,2 cm/STEM= 11 cm/ HEAD TUBE= 14,5 cm/ SEATPOST TUBE: 52 cm/ CROSSBAR: 55 cm/DOWNTUBE= 56 cm/ CHAIN STAY= 50 cm ?