How to Make a Bubble Set or Swan neck bend in Conduit

День тому

If you need to pass conduit over an obstacle, then you'll need to form a crank of bubble set. Sometimes called a swan neck ben. In this video, we run through the techniques and tips to create the perfect conduit bend.
======================
🕐 TIME STAMPS 🕕
======================
00:00 Bubble set or swan neck
00:52 Challenge
01:09 Find the middle of the conduit
02:11 More bend required
03:41 Mark it for bend 2 and 3
04:21 Line up bend 2
05:10 Using a fixed rule
05:44 Finding mark 3
06:22 Position make 3
06:33 Running straight
06:57 Bend 3
07:36 Moment of truth
08:00 Talking a adjustments
================================
🔦 More conduit videos from eFIXX
👉www.efixx.co.uk/metal-conduit
👉www.efixx.co.uk/how-to-bend-co...
👉www.efixx.co.uk/conduit-instal...
==AD=====================================
Series produced in association with
Metpro - Conduit and accessories
👉 hub.efixx.co.uk/metpro
Bend-it-now - Conduit Bender
👉 hub.efixx.co.uk/bend-it-now
=========================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry. 👉hub.efixx.co.uk/youtube-subscribe
========================================
⚡️ Take a deep dive into the latest electrical products, applications and technology
👉 hub.efixx.co.uk/essentials
=========================================
🚧 More resources for electrical apprentices and learners
👉 hub.efixx.co.uk/apprentice
=========================================
#efixx #conduit #electrical

КОМЕНТАРІ: 53

@Mike_5 Рік тому

PVC conduit installers are one thing but proper Galvinised metal conduit is a different world!

@andysims4906 Рік тому

Bit like plumbers . Plastic and copper

@michaeldavies1755 Рік тому

Good video and good skills. Electricians are required to have lots of technical and practical skills honed over years to earn yhe same money as decorators

@stefangiurgila7807 Рік тому

Haha yeah

@grahamshortt2525 Рік тому

Great video lads . Same Hilmar bending kit but called a saddle set in Ireland and a swan or goose neck is something you do on outside lanterns .

@Xlanzilla 6 місяців тому

The back bends would be half of the angle of the initial bend. If you have a angle gauge on your former you can get a good approximation.

@mij.londoner 2 роки тому

A great bubble set video . Thanks for sharing My fav Elec channel.

@efixx 2 роки тому

😍

@joanofarc708 Рік тому

Thanks for sharing i must try this

@thattoolguy9432 Рік тому

Well done Jake

@Dragon-Slay3r 3 місяці тому

This is why they trying to literally take me out and then say it was welldone 😭 Is this because I ate the long kebab side and the short skinny side is in the Thor bin and they used aunty as a cover for it

@DasTwigster 7 місяців тому

great head up... thanks.

@dja.selekta 2 місяці тому

Quality Guv. Thanks

@rogerbradbury9713 3 місяці тому

It's been 30 years since I did this, but I would mark the 20mm tube in three places before I bent it. The marks being (I think) at 125mm spacings for a bubble set over another 20mm conduit. I'd then line each mark up in turn relative to the hacksawed marker groove that you'll find on nearly every former, then make each bend in turn. One mark would be against the groove, the other two offset from the groove by different amounts. This gave me a symmetrical bend with each mark in the middle of its bend. I would check for alignment against a handy door frame; there's usually one nearby when surface conduit is being installed. I much prefer these Hilmar benders to any other. I remember one Hilmar I used was built with round section tubing, not the square section tubing most of us are used to; it must have been a very early version.

@Dragon-Slay3r 3 місяці тому

They they used a seagul to make a short paper clip behind the swan centre flats which took cover from hair straightner few months ago then so the signature bumble “spell” can be used to cover the will situation and they used a double surname of sajdah to cover death row records situation which was masked with basketball outside 3 years ago situation and a different cat left next door due to outsoor burger situation

@charletonzimmerman4205 Рік тому

In the USA, North America, we "Electricians", call it a "3-Point" saddle, one 45 degree, with both side, 22 1/2, @ ends. or 15, 30, 15.

@MrUtube1916 2 роки тому

Would yous do a video on a 4 piece bridge bend? Aka handle bars? Cheers

@alanmarriott9216 Рік тому

Great video but can I ask. On site there very rarely is a desk or work bench available so any tips on striking the line for bends would be much appreciated.

@dexwhitmore 10 місяців тому

use what you have; spirit level, speed square, edge of a workbench or toolbox

@williamcuthbertson4903 Рік тому

I love these videos. They're helpful. However, on a massive industrial site, I've found applying the techniques much more challenging to the point of not doing it the ways shown in your videos.

@efixx Рік тому

Thanks 👍🏻

@matthewcampbell9956 Рік тому

Lmao they only read the first 2 sentences 😂

@impactvision Рік тому

A swan neck is a completely different bend, generally to drop into loop in/out boxes or go round external 90's without having to chase out the blockwork.

@markbrookes9919 Рік тому

Question : I’ve been told that in the AM2s and e , that there has to be a 25mm clearance between the bubble set and the pipe work it is going over. Can you help clarify please. Thankyou

@ThePUTNON Рік тому

Can you show how to do bridge set please

@benmanning5789 3 місяці тому

Could you indicate exactly where you need to line the black mark up on the bender please for the different types of bends?

@Crissecrisse98 Рік тому

Usually my first center bend is 45 degrees and the 2 other one are 22,5 degrees

@joanofarc708 Рік тому

This seems to be a better way

@brendanosullivan2484 5 місяців тому

Then to find the distance between the center you need to find the Hypotenuse, which is the opposite (distance of jump (50mm in this case)), divided by sin ((angle(which is 22.5)). So here it is Hyp = Opp/sin22.5 => Hyp = 50/.38 ==> 130mm....

@abscomm 2 роки тому

How do you set the tipex marks if you don't have an inclinometer? Also, using a ruler that bends could give you some issues, but if you rotated it 90 and used its edge rather than its face you may have better results.

@dexwhitmore 10 місяців тому

spirit level with a 45 degree vial. Inclinometer is just a fancy spirit level

@shanemcredmond9751 9 місяців тому

Thanks for the helpful video. Just one question. You state, the first mark is approximate. How do we get an exact measurement for the center of the bubble. For example if i need to measure 800 mm from the back of bend to center of obstacle.

@eanan00 7 місяців тому

Did you find out the answer?

@shanemcredmond9751 7 місяців тому

@@eanan00 no, I can get it pretty good by just guessing, but I'd like to have an exact method

@Dibbo1979 6 місяців тому

Great to see proper electrical work, anyone can house bash. When i sat the 18th the lecturer and other pupils were all house bashers, what a load of shite.

@shinyjohn6568 Місяць тому

when you establish your first bend can't you put a reference mark where you handle stops on the base frame so all the bends are exactly the same... if that makes any sense 😕

@joemoore9991 Рік тому

That is a big bubble mind. Usually just jump over another conduit

@2feetaguywith Рік тому

Do you have metal pipe like EMT over here in the states? Do you use that bender for both?

@sparkykevboss Рік тому

No just this thicker walled stuff. It's the same old conduit as 60 years ago. Hopefully one day we'll get something inbetween pvc and steel like a light gauge steel with push fit fittings and steel clip in saddles. Come on manufacturers it's 2023 next week.

@arputharajr7842 2 роки тому

Please explain to Metal trunking cutting different shape

@efixx Рік тому

coming soon!

@mpalaskokkalis1476 Рік тому

Perfect electric

@ranpederson5482 Рік тому

In America I would call it a three bend saddle.

@N-hunter Рік тому

Called a three point saddle in the US. We do simple calculations and mark conduit first, then use a hand bender. Seems much simpler and more accurate than this method

@alfredoowns12 Рік тому

Bro, my thought exactly. Regardless if it's emt or rigid conduit hand benders are way more practical for use in the field. Especially when we are running 100'-300' of raceway a day. Definitely appreciate the American conduit bending practices.

@alasdairmacleod5638 Рік тому

You'd need a pretty solid hand bender to do 25mm galv 😅

@jparagallo 8 місяців тому

@@alasdairmacleod5638 over here we call it 1”, and yes we have a hand bender for it