Pan Tilt Control using Servos for ESP32 Cam

Pan Tilt Control using Servos for ESP32 Cam | WiFi Security Camera

День тому

In this video we are going to add Pan and Tilt control for esp32 Camera using servo motors.
Using this assembly we can rotate the camera horizontally and vertically from 0 to 180 degree. This can easily be used as surveillance camera.
We will capture images using esp32 camera and send these images to our mobile phone using websocket through wi-fi connection.
We will control camera rotation using our own mobile app.
I have explained in details each step along with code.
👉Please subscribe: ukposts.info...
👉Components list:
✅ ESP32 Cam module (Canada amzn.to/3t62LED) (India amzn.to/3UIyib1)
✅ Pan Tilt Servo assembly (Canada amzn.to/3JcmkRl) (India amzn.to/3fBptAO)
✅ SG90 servo motors (Canada amzn.to/3MGfvtD) (India amzn.to/3sVTY7D)
✅ 5V AC DC Adapter (Canada amzn.to/3q2eKkO) (India amzn.to/3FMzaHk)
✅ Breadboard (Canada amzn.to/3KH7sL6) (India amzn.to/3sXgZqC)
✅ Arduino Uno for uploading code. (Canada amzn.to/3JpiGE5) (India amzn.to/3E0VefL)
✅ Jumper wires (Canada amzn.to/3I8fZVG) (India amzn.to/3heE3Pa)
👉 Shorts Channel :
/ ujwalnandanwar
👉Code and diagram:
github.com/un0038998/PanTiltC...
👉ESP32 board URL:
dl.espressif.com/dl/package_e...
👉AsyncTCP Library:
github.com/me-no-dev/AsyncTCP...
👉ESPAsyncWebServer Library:
github.com/me-no-dev/ESPAsync...
👉Wi-Fi Car
• Smartphone controlled ...
👉ESP32 Camera Surveillance Car
• Surveillance Car using...
👉Home Automation - Arduino IOT Cloud and ESP32
• Arduino IoT Cloud and ...
👉ESP32 Getting started - Home Automation
• ESP32 Getting started ...
👉Follow us on Instagram:
/ hashincludeelectronics
⏱Chapters
00:00 Intro
01:12 Components
01:47 Pan Tilt Bracket Assembly
03:37 Connections
04:41 Code explanation
08:29 Mobile App
08:51 Demo
11:27 Important Points
#esp32cam #pantilt #hashincludeelectronics

КОМЕНТАРІ: 537

@afropicturecompany3653 2 роки тому

I have just made this and it's working perfectly. Thank you Sir for sharing!! Well done.

@hashincludeelectronics 2 роки тому

I am glad that it worked perfectly well 👌🏻👏🏻. Good job 👍🏻

@laggygamer4 6 місяців тому

hlw brother mine is not working perfectly can u help me

@MuhammadRidho-qu9ey 21 день тому

@@hashincludeelectronics I can't access the IP address. What's the problem with the IP? Is it a bug/error?

@HarshilRekhi Рік тому

Excellent video with proper explanation 🙌

@hashincludeelectronics Рік тому

Thank you very much and I am glad that you liked it 👍🏻

@GioBen68 2 роки тому

Great video. Exactly what I was looking for 👍🏼 Will use it with esphome

@hashincludeelectronics 2 роки тому

Awesome 👏🏻

@MuhammadRidho-qu9ey 21 день тому

@@hashincludeelectronics I can't access the IP address. What's the problem with the IP? Is it a bug/error?

@choporo2005 2 роки тому

OMG, I found exactly what I wanted to do. Thank you very very much.

@hashincludeelectronics 2 роки тому

That’s nice 👍🏻I am glad that it helps you .

@donaldkormos5529 2 роки тому

Thank you ... will be my next project to use with model trains. All the best to you!!!

@hashincludeelectronics 2 роки тому

Thank you 👏🏻

@zbll2406 2 роки тому

This video is ultra mega useful thank you!

@hashincludeelectronics 2 роки тому

Glad you think so!

@anatoledaunay6899 Рік тому

can you add 2 buttons below the sliders

@skrajupuli Рік тому

Ultra mega pro Max plus useful

@faroekjuthan89 2 роки тому

A great video, thanks for sharing and good luck with your projects.

@hashincludeelectronics 2 роки тому

Thank you very much and I am glad that you liked it 🙂👍🏻 Stay tuned for more such interesting project 👍🏻

@yashasvichoubey9179 2 роки тому

This is Great 👏🏻

@hashincludeelectronics 2 роки тому

Thank you very much 👍🏻 cheers 🍻

@halalexpressions 2 роки тому

Well done. Keep it up!

@hashincludeelectronics 2 роки тому

Thanks you very much 👍🏻👌🏻

@andystevens3474 2 роки тому

Great video... keep it up and make more.

@hashincludeelectronics 2 роки тому

Thank you very much 👍🏻

@woolfy02 Рік тому

Awesome project!

@hashincludeelectronics Рік тому

Thank you very much . I hope it helped you 👏🏻👍🏻

@thebokaguy Рік тому

I need to use the same on drone for movement, but the components have more weight than I need. Any alternatives, you can suggest?

@prabhatverma7538 2 роки тому

Nice work .. 👍

@hashincludeelectronics 2 роки тому

Thank you so much 😀

@pascalkop1479 Рік тому

Thank you so much 🙏🏻

@hashincludeelectronics Рік тому

Welcome 🙏

@ukshaandumasia1446 Місяць тому

Thank you sir

@hashincludeelectronics Місяць тому

Welcome 🙏

@FixitEasyDIY 10 місяців тому

Very good 👍👍👍

@hashincludeelectronics 10 місяців тому

Thank you very much

@AdityaNakhare 2 роки тому

Amazing...just one observation which u can consider : Camera movement is bit noisy

@hashincludeelectronics 2 роки тому

Thank you for checking out the video and suggestion 👍 The noise comes from Servo motors used as these are very cheap servos and has plastic gears. It can be avoided using better servos with metal gears .

@jeremyviny6817 2 роки тому

Thanks for the video I am struggling to get my servos to actually work, however everything else seems to work just fine.

@hashincludeelectronics 2 роки тому

Thanks for checking out the video 👍 Good to hear that you are making progress in this project . What issue are you facing with servo ? Make sur to provide proper power supply of 5v dc.

@jeremyviny6817 2 роки тому

@@hashincludeelectronics Thanks so much for your reply! I am using a 27-watt 3v-7v adjustable voltage power supply, which is set at 5v. The Servos are not responding to slider adjustments.

@hashincludeelectronics 2 роки тому

@@jeremyviny6817 that’s good enough supply . Where are you checking this ? On mobile or on laptop? It only works on touch screen device

@jeremyviny6817 2 роки тому

@@hashincludeelectronics I am using my phone so think the issue might be elsewhere :(

@mohammedsadiqahmad2886 2 роки тому

@@jeremyviny6817 I have the same problem. One of the vertical servo motors does not respond to the slider adjustments. Did you find the solution?

@ralfrudyphile.batallones6948 Рік тому

thanks sir for this wonderful tutorial, I was wondering if how can I add a relay switch on the esp32 cam

@hashincludeelectronics Рік тому

Thank you very much for checking out the video 👍🏻. You can check my other videos on esp32 cam module for reference .

@akshatt25 7 місяців тому

Please can you make a video on how to capture and save image on laptop using esp 32 cam please

@bassjunias439 Рік тому

Thanks bro

@hashincludeelectronics Рік тому

You are welcome 🙏

@thebusinesscentre 8 місяців тому

This is cool better than ip cam

@hashincludeelectronics 8 місяців тому

Thanks for checking out the video 👏🏻👍🏻

@dbananaa 2 роки тому

Thanks a lot for this video from Kazakhstan. At the moment 4.54 , what link did you write in "Additional Boards ds Manager URLs"?

@hashincludeelectronics 2 роки тому

Thank you very much 👍🏻it’s link is given in the video just around 4:56. Also it’s provided in the description of the video .

@javieramayav7533 2 роки тому

Hi, thanks for your great ideas, I have a question, I never see the NowISeeyou SSID, how am I suppose to get that?

@hashincludeelectronics 2 роки тому

Thanks for checking out the video. You need to upload the code into esp32cam module and restart it. Once done try to see if its available in wifi in your mobile. If not then try restarting your Wi-Fi on mobile.

@michaeltina3866 2 роки тому

Very nice vidéo...

@hashincludeelectronics 2 роки тому

I am glad that you liked it 👍🏻

@andystevens3474 2 роки тому

Have you tried audio streaming via esp32? It would be a good idea along with camera.

@hashincludeelectronics 2 роки тому

Not yet . yeah it would be good if we have audio as well . Will see what can be done .

@miisha626 Рік тому

@@hashincludeelectronics yes plz make that project also, audio+video streaming via esp32cam and microphone.

@CrazyGaming-lw7cf 3 місяці тому

@hashincludeelectronics Awesome video brother thnx for sharing this but i have a question what is the range of this model

@hashincludeelectronics 3 місяці тому

Thank you very much for checking out the video . 👏🏻👍🏻. The range is around 60-80 ft .

@Manash_BG 7 місяців тому

Thanks sir , since I have made a drone I want to add a camera which can record and send to phone but there is no video of it soo i searched for wireless cctv and this was helpful I can add it to my drone soo i can stream in phone thank you sir also can u pls Say me how to make the camera and the phone connection range long

@hashincludeelectronics 7 місяців тому

Thanks for checking out the video 👏🏻👍🏻. It’s nice to hear that you are working on drone and want to add camera functionality in it . However this project has very limited range like wifi . However if you want to increase the range then you might have to connect the antenna. 👏🏻👍🏻

@Manash_BG 7 місяців тому

@@hashincludeelectronics Can u make a video about it soo i can understand clearly since I don't know properly of making things because I don't have the essential required stuff

@alexandrepozzi8808 2 роки тому

congratulations to the project, I just thought that the response time of the camera is much higher than the native webserver project, is there a way to make the camera refresh faster?

@hashincludeelectronics 2 роки тому

Thanks for checking out video 👍🏻 . Yeah camera image capture is faster however the transfer of image through Websocket limits the FPS for video . It’s the best I could do with this webserver . I would be glad if there is other way to improve it for more FPS. But for now don’t see any way to improve it further . The video is still responsive enough with VGA quality .

@iot_cdp 2 роки тому

Use a pi zero w

@fabriziolongo83 Рік тому

Great project. Is it possible to add a label with a sensor value on a web page? If yes....how I can do it?

@groovy8969 8 місяців тому

You can do it with thinkspeak and eith api in your code

@laurenceandremagsino1022 5 місяців тому

great work! I have a question: Does it need to be on the same Wi-Fi network? I want to control it from a distance. Do you have any suggestions on how I could do that?

@erment55 5 місяців тому

yes,it needs to be on the same wi-fi network and you need another outsourced server to control it more remotely like blynk..

@amruthaboorti7190 Рік тому

A very much useful video for the current project I'm doing. Kindly can you please tell me how this can be make possible on a drone to view and get the video. It means a lot if you would help for this. Thank you ☺️

@hashincludeelectronics Рік тому

Thank you very much for checking out the video 👍🏻. This will not have enough range for drone .

@sumeetmurgod2211 5 місяців тому

Thank you sir for this code and setup explanation. And i have question sir can we use a battery for power supply

@hashincludeelectronics 5 місяців тому

Yes you can use battery . However you need to make sure battery provides exactly 5V . Also use only rechargeable battery 👍🏻👏🏻

@sumeetmurgod2211 5 місяців тому

OK sir thank you for your guidance.

@hashincludeelectronics 5 місяців тому

@@sumeetmurgod2211 welcome 🙏

@dienau6313 7 місяців тому

I dont understand at 8:17 which pins do you connect in arduino uno?, and how it can connect to esp32-cam?

@hashincludeelectronics 7 місяців тому

Please check the video slowly and also take a look at circuit diagram 👍🏻👏🏻

@donaldkormos5529 2 роки тому

Could this be modified to use with 360 degree servo to get 360 degree pan capability? Thanks for your attention.

@hashincludeelectronics 2 роки тому

Yes it can be. Just change the slider values in code. min and max values for pan slider to 0-360.

@donaldkormos5529 2 роки тому

@@hashincludeelectronics Thank you very much for your reply. Ask because of my intended model train application. I'd like to mount on model train flatcar ... it would be nice to see forward, backward as well as right and left as train goes around layout.

@elmardasmarinas678 Рік тому

Great work! may i ask which part of the code need to modified for flipping the camera angle? thanks in advance!

@hashincludeelectronics Рік тому

Either you can rotate the esp32camera or change the code where it has img section of html code . You need to check how to rotate image in html on internet .

@elmardasmarinas678 Рік тому

@@hashincludeelectronics thanks for your generous reply! i get it! God bless!

@hashincludeelectronics Рік тому

@@elmardasmarinas678 awesome cheers 👍🏻

@christinang478 Рік тому

Can I combine this project with your other video named “Surveillance Car using ESP32 Camera Module"? If yes, what should be the changes that will occur in its code and the wiring

@hashincludeelectronics Рік тому

There is already a video on my channel where I have used pan tilt camera in car . Please check that 👍🏻

@user-zc8ck1rv6s 8 місяців тому

@@hashincludeelectronics Can I get the model for the 3D printing?

@baraalsaeed6865 2 роки тому

Firstly, thank you very much. I hope to answer me ,can I use GPIOs 4, 12, 13, 14, and 15 to connect them to servo motors ?

@hashincludeelectronics 2 роки тому

Yes you can use these pins for connecting to servos .

@sakethpuppala1016 2 місяці тому

you can not use gpio 4 bro

@nh65asd26 Місяць тому

its possible to disable the flash led @@sakethpuppala1016

@johnhammond3605 2 роки тому

I have a basic question.i m getting a esp32 board..... should i get the cam version or the plain esp32.....does the cam version have all the functionality of normal esp32...since number of pins in esp cam are half the number of non cam version

@hashincludeelectronics 2 роки тому

It depends upon your project need . Does your project need camera in it ? If yes then go for esp32cam . Else if you are starting with esp32 then buy simple esp32 module of 38 pins . Yes both the modules will almost function same with esp32 having far more number of pins than cam module.

@pushkarjaiswal4808 5 годин тому

Can u please make it gesture controlled. For example if you turn your hand around, camera should turn in same direction.

@MotivateMaster422 9 місяців тому

bro, can it give for work 3.7v power?

@hashincludeelectronics 9 місяців тому

No . You need to provide only 5v 👏🏻

@sma_knk3207 Місяць тому

Hello friend, first of all, the project you have made is very nice, I congratulate you and I have a question for you. I will move this system to the v4 port of my modem. I need to connect it to the modem. What changes should I make in the code to connect it to the modem?

@hashincludeelectronics Місяць тому

Thank you very much for your nice comment . 👍🏻👏🏻. To answer your question , you will have to AP WiFi mode in the code . You can check my getting started with esp32 video to see how we can connect to modem using AP mode 👍🏻👏🏻

@muhammadsalem9924 7 місяців тому

I want to implement this project: "Design of Driver Awareness system depending on Eye and Face Feature and Discrimination" Can I use ESP32 instead of Raspberry Pi ? please reply

@hashincludeelectronics 6 місяців тому

You can use esp32cam however you will have to do more study on how to use it for object detection etc . 👍🏻👏🏻please check details on internet available 👍🏻

@hakamsingh1673 8 місяців тому

Hello sir can we access it from internet from any remote locations

@hashincludeelectronics 8 місяців тому

No it’s not possible in this project 👍🏻👏🏻

@iitztanz Місяць тому

I have a question: if I want to use only one servo motor, then add a PIR sensor and a piezo buzzer, do I also need dummy pins for each component? Or are dummy pins only necessary for the servo motor? Thank you, please answer.

@hashincludeelectronics Місяць тому

We don’t need dummy pins for other components 👍🏻👏🏻

@nh65asd26 Місяць тому

hi nice video, can you explain more why we need the dummy servos for the libraries to not interfere ? i am attempting a similar project, and i notice that when my servos are connected, the esp32 fails and continuously reboots.

@hashincludeelectronics Місяць тому

Actually it was to avoid the conflict between timers used by servo and cam . But if you check my recent videos we don’t need dummy servos at all . I have fixed that problem . 👍🏻👏🏻

@nh65asd26 Місяць тому

@@hashincludeelectronics nice. I found you can also fix it by not using the servo library, and using delays for software PWM

@joseramonbarajashernandez4463 5 місяців тому

Hello, good video, where can I get the structure of the servos and the esp32cam camera?

@hashincludeelectronics 5 місяців тому

Sorry I did not get your question.

@kitlinghou6848 Рік тому

can i use li-battery3.7vx3 (850mahx3) for this testing ? because i found my 2 servo has no any motion.

@hashincludeelectronics Рік тому

Yea you can 👍🏻

@erment55 5 місяців тому

Great job. Is it possible to add taking a picture and recording video? If yes....how I can do it?

@hashincludeelectronics 5 місяців тому

Yes we can use SD card and store pics. But it will need lot of code changes . 👍🏻👏🏻 you can refer some material on internet for this 👍🏻

@yashkumar2716 2 роки тому

hi bro thanks for the video i just wanted to know what is the power output of your adapter because i am using normal 5v 2A charger to provide power to esp32 cam and servo but sometime it work but most of the time i get brownout error in the esp32 cam i think power is the issue but i checked it with the multimeter the power is 5v only but not sure why it is happening i am sure board is not faulty because sometimes it works when i hold the pins and move it a little in breadboard

@hashincludeelectronics 2 роки тому

It’s 30 watt . Yeah that brownout issue can be due to improper power. Try the other adapter .

@yashkumar2716 2 роки тому

30 watt ? Can you share any link of that adaptor I'll also try to get something similar

@hashincludeelectronics 2 роки тому

@@yashkumar2716 amzn.to/3HewZcX

@hindgaming_ 6 місяців тому

I am a newei and I have got an another problem 😅 Now the video gets freezed whenever I try to stream the video. Also I am only able to use it when I am connecting it through arduino to laptop. ESP32 doesn't start when I power it external 5v supply without the RX, TX pins. It's only working when I am connecting the RX, TX pins of arduino with it.

@sclvapi3104 8 місяців тому

Bro where to get this bracket from?!!

@hashincludeelectronics 8 місяців тому

Please check the product link in the description if that works 👍🏻👏🏻

@Manash_BG 7 місяців тому

Sorry sir I commented again since u didn't reply to my last answer I gaved Can u please explain me how to increase the range of it

@hashincludeelectronics 7 місяців тому

You can add antenna to esp32 cam module . However you need to check for this step on internet 👍🏻👏🏻

@Manash_BG Місяць тому

@@hashincludeelectronicsreplying after 5 month thanks it was really useful

@Secret-eo1rz 2 роки тому

Hi sir, May i know what is the used for Arduino UNO R3 in this project? At first I tot it is used to control the servo motor then I realized the servo motor was connected to the ESP 32-CAM instead of the Arduino board

@hashincludeelectronics 2 роки тому

Arduino Uno is only used to upload code into esp32 cam .

@Secret-eo1rz 2 роки тому

@@hashincludeelectronics I see ... Appreciate that sir 😳

@techvishalnewsdevelopers309 Рік тому

Unable to upload code at all with ft232r module so i have ordered cp2102 usb to ttl module

@huynhtrivinh5361 7 місяців тому

Can you teach me how to rotate the screen video please.

@hashincludeelectronics 6 місяців тому

You need to fix the esp32 cam as shown in video . Not sure if that will help 👍🏻👏🏻

@sumeetmurgod2211 2 місяці тому

OK sir

@NHAN_VLOG Місяць тому

Hey you, do you have any video how to make a webserver for esp32

@hashincludeelectronics Місяць тому

You can check my video on getting started with esp32 👍🏻👏🏻

@raffaelebarlotti9017 Рік тому

Nice project! Could you tell me which mobile app to use? Thank you.

@hashincludeelectronics 11 місяців тому

The mobile app code is inbuilt in Arduino code itself . It uses html and JavaScript 👌🏻👍🏻

@worldinyourhand0 2 роки тому

hello bro, which recommended adapter? 5v, 9v or 12v??? (and where is the arduino with esp32 diagram?)

@hashincludeelectronics 2 роки тому

1. Use Only 5v DC output adapter . 2. This diagram is there is the same link

@worldinyourhand0 2 роки тому

okay ty

@hashincludeelectronics 2 роки тому

@@worldinyourhand0 👍🏻

@syadadnan4769 Рік тому

Hello sir, great video!! Is it possible to make this camera can be controlled remotely using arduino cloud iot?

@hashincludeelectronics Рік тому

Unfortunately it can not be done using Arduino IOT cloud .

@hindgaming_ 6 місяців тому

Bro I am providing it 5v supply but I think it's less than 2 A. Since I am not using sevo but still the video is freezed. Is it because of A? Is it necessary to provide 2A for video streaming

@hashincludeelectronics 5 місяців тому

You need to change one setting in code . Please check for this step in video 👍🏻👏🏻

@JeroLam24 7 місяців тому

Hi! I am havign a problem while using the app. The light works well but the servos are not moving and the camera is printing "Frame buffer could not be acquired" in the Serial Monitor. How can I solve that? I have already set the variable WS_MAX_QUEUED_MESSAGES to 1

@hashincludeelectronics 7 місяців тому

Please compile and upload the code again after you have set that setting to 1 👍🏻.

@JeroLam24 7 місяців тому

@@hashincludeelectronics Is the first thing I did, but nothing happens, the camera is unable in the app

@suneetasandeep 10 місяців тому

Hi, Great project, i have build one and both the servos are woking fine. but the video is not coming and if coming its just a snpshot only. in serial monitor i am getting "Frame buffer could not be aquired" please suggest on how to resolve this. Thanks

@hashincludeelectronics 10 місяців тому

Thanks for checking out the video 👍🏻👏🏻. You need to set one parameter as shown in video . Please check video and see how to set “max messages queued” variable . 👍🏻that will solve the issue .

@laggygamer4 6 місяців тому

hi sandeep, did your problem got solved because i am facing the same problem

@naufalalghifari537 5 місяців тому

@@hashincludeelectronics hi me too facing the same problem, i follow the step " 32 to 1 " but the problem still goes

@Secret-eo1rz Рік тому

Good day Sir, I faced a problem which is when I try to control my servo motor it will auto disconnected the wifi connection. Is it because of the current provided to the motor doesn't enough? But for the ESP32 CAM and the lightning control works well

@hashincludeelectronics Рік тому

Yes . Servo motors need proper current around 500 ma . So please use rechargeable battery and provide 5v to servos .

@Secret-eo1rz Рік тому

I see ... appreciate for the reply sir 🙇

@hashincludeelectronics Рік тому

@@Secret-eo1rz happy to help 👍🏻

@muhamadilham3061 5 місяців тому

Hey there I'm having a problem with the live video it doesn't seem to be showing up for me. I've also noticed that the servo doesnt work even though i've followed all of you instructions in the video including the max messages queue and reupload the code

@hashincludeelectronics 4 місяці тому

Check the connections please 👍🏻👏🏻

@williamhuang5329 2 роки тому

Hanzhen harmonic drive gear , strain wave reducer, robot joint, over 30 years experience

@hashincludeelectronics 2 роки тому

👍🏻

@Sky_is_the_limit03 2 місяці тому

Well sir if I use arduino nano here instead of arduino uno.....

@hashincludeelectronics 2 місяці тому

Yes you can 👍🏻👏🏻

@MrAshubajpai 2 роки тому

I want to add your pan and tilt code so that i can addin my existing model.... Can you plz help

@hashincludeelectronics 2 роки тому

Sure. You can use the code or edit in the same code. Its free 😉

@baocunb770 Рік тому

A very nice project! I did it but only pan SERVO runs, Tilt SERVO not move, what can be? thanks.

@hashincludeelectronics Рік тому

Thanks . Please check the connections properly . May be there is loose connection for sure .

@baocunb770 Рік тому

@@hashincludeelectronics thank you for quick reply , I did exchanged two SERVOs pin and tried all pins of ESP32CAM, only pin12 drived both SERVOS, other pin not...

@hashincludeelectronics Рік тому

@@baocunb770 you need to use io14 and io15 only .please check the circuit diagram for pins used .

@Moon-D0G Місяць тому

How can we fine tune the Servos to be more precise or less jittery?

@hashincludeelectronics 25 днів тому

You can try adding some delay if possible 👍🏻👏🏻

@mohammedsadiqahmad2886 2 роки тому

Sir, please, I want to do it in order to add it in my graduation project. Is it possible to open this (IP website) from a place far from the esp32 piece, for example, if you are connected outside the house to a network and esp32 in my house??

@hashincludeelectronics 2 роки тому

You have to be on same network for this camera and app to work. Currently it does support controlling from anywhere in the world.

@mohammedsadiqahmad2886 2 роки тому

@@hashincludeelectronics This means I should stay close to the esp32 and not far away !!?

@hashincludeelectronics 2 роки тому

@@mohammedsadiqahmad2886 nope . I means it will work the way your WiFi works . 70-100 ft .

@mohammedsadiqahmad2886 2 роки тому

@@hashincludeelectronics Yes, I understand, thank you

@hashincludeelectronics 2 роки тому

@@mohammedsadiqahmad2886 welcome 👍🏻

@taramis4570 Рік тому

Great video! I have a problem with during compilation on the line 246. "error: variable 'std::istringstream ss' has initializer but incomplete type std::istringstream ss(myData); ^" Do u know how I can fix it?

@hashincludeelectronics Рік тому

This error should not occur . Which Arduino IDE are you using ?

@ksatish381 Рік тому

Bro this is Bluetooth operated right or u have to give the live connection to the Arduino

@hashincludeelectronics Рік тому

This is WiFi operated. But you don’t need internet for this . This project creates its own WiFi network .

@ksatish381 Рік тому

Oh tht nice but can u explain the Arduino part i tried but it failed i didn't know how to do it . If u could help me I will be very thankful I will try the robotic arm which u have made its was awesome ur explanation tho it's nice bro Tho i have a doubt i wanted to purchase a 4DOF robotic arm is tht code applicable for tht which is a 3DoF Those both look quite similar pls reply sir❣️

@sdknstar601 2 роки тому

Is that possible to replace the servo control using joystick?...and trough laptop...

@hashincludeelectronics 2 роки тому

You need joystick instead of slider on the app working on laptop ? Or you need actual hardware joystick ?

@sdknstar601 2 роки тому

@@hashincludeelectronics actual joyatick that run on pc my friend...is that possible?...thank you..

@hashincludeelectronics 2 роки тому

@@sdknstar601 anything is possible👍🏻. But I don’t get a point when you say joystick with PC. Sorry I might be missing something here. However you can use joystick with another esp32 which is transmitter and send commands to receiver esp32cam. Simultaneously receive the video stream on PC. Or you can elaborate more on your requirement 👍🏻 I have never attached joystick directly to PC.

@sdknstar601 2 роки тому

@@hashincludeelectronics ukposts.info/have/v-deo/rGaFZYiRhaqjkWg.html I found this...but...actually i want control with usb joystick via laptop...😔

@hashincludeelectronics 2 роки тому

@@sdknstar601 oh ok. I am not aware about USB joystick. If I find something I will let you know . 👍🏻

@MuhammadQasim-kw1er 4 дні тому

HEY can i get the stl file of servo part, i know you order it online however by any chance you have it/arrange it. Thanks

@hashincludeelectronics 4 дні тому

Unfortunately I don’t have it 👍🏻👏🏻

@MuhammadQasim-kw1er 4 дні тому

@@hashincludeelectronicsThank you for your comment, no worries! I got it anyway.

@hashincludeelectronics 4 дні тому

@@MuhammadQasim-kw1er awesome 👍🏻

@kaushalkarwa3182 7 місяців тому

Hi sir the camera is stuck at one picture, can you help me i need this asap for a project.

@hashincludeelectronics 7 місяців тому

Thanks for checking out the video 👍🏻👏🏻. You need to set MAX_QUEUED_MESSAGES to 1 as shown in video . Please check the video for this step . It will solve your issues 👍🏻👏🏻

@sushanthkrishnamithran9178 Рік тому

Can i use 5v 2amps adapter to power two servos?

@hashincludeelectronics Рік тому

Yes you can 👍🏻

@nadeeshwaluskar4621 5 місяців тому

hello! as soon as i saw this video i wanted to make this project, but i am stuck in middle. the issue is that cam module is not streaming the video instead it is just capturing a image at that instance when it is getting connected to my phone. What should i do ? please help me.

@hashincludeelectronics 5 місяців тому

You need to update one setting related max queued messages . Please check the video for this step 👍🏻👏🏻

@sorathonpoahong5870 6 місяців тому

my serial monital show"psram initialized. malloc to take memory from psram above this size" what it mean and howto fix i?

@hashincludeelectronics 5 місяців тому

I believe you are missing some step . Please check the video for any missing step . 👍🏻👏🏻

@aditya_chamoli 4 місяці тому

Hey can anyone tell, where to change that important settings part???

@hashincludeelectronics 3 місяці тому

Please check the video for details 👍🏻👏🏻

@thibault_4705 Місяць тому

Hello ! Mine is bugged, it connects but the image doesn't refresh. Is there a way to fix it plz ? Thanks !

@hashincludeelectronics Місяць тому

You need to change one setting in code . Please check the video for this step 👍🏻👏🏻

@user-oc3wz7bg2l 3 місяці тому

Bro is it compulsory to use AC to DC adaptor

@hashincludeelectronics 3 місяці тому

No it’s not . But you need to provide 5v dc with more than 2A current 👍🏻👏🏻

@user-oc3wz7bg2l 3 місяці тому

Bro only one request can you explain this in detail pls

@shivanghashia3320 7 місяців тому

I am not able to connect to wifi , it's showing connected but no internet. Can you provide the solution?

@hashincludeelectronics 7 місяців тому

Please check this step in the video . It’s clearly shown in the video 👍🏻👏🏻

@pardosivarlyn2272 10 місяців тому

Can you show me how to insert the program to ESPl cam?

@hashincludeelectronics 10 місяців тому

I am not sure about ESPI cam .

@massonepaolo Рік тому

It is possible to have the ESP-32 connect to my router and have the IP static?

@noweare1 7 місяців тому

Yes, go into your router via the browser and there is a setting to keep the IP address the same each time it connects to local network

@Takeover738 Місяць тому

Uploaded the code but camera just doesn't stream all I get is frozen still pic. Do you have a solution for this problem? great vudeo

@hashincludeelectronics Місяць тому

You need update one setting in code . Please check the video for this step 👍🏻👏🏻

@Takeover738 Місяць тому

I got it working i was trying to get the esp32 to connect to my router but no luck

@Rayhan_Ahmed. 7 місяців тому

Sir, I am facing this problem " esp_camera.h " file not found. Now what should I do? Please sir help me, Love from Bangladesh ❤️

@hashincludeelectronics 7 місяців тому

Please install the esp32 board as shown in video . Also select proper board while uploading the code in Arduino IDE 👏🏻👍🏻

@gowtham777 4 місяці тому

@@Rayhan_Ahmed.Use laptop or computer

@NehaRaiDEC- 10 днів тому

Sir can you please help me I am facing an error related to AsyncTCP Library saying no such file or directory

@hashincludeelectronics 7 днів тому

You need to install those libraries . Please check the video for steps 👍🏻👏🏻

@joshuaolaiya 10 місяців тому

I want to build this project so I can connect to it any place in the world. Can I use an external internet access for the esp32 cam instead of my phone so I can have acces to it anywhere in the world and can I be able to control the servo any place in the world? Thanks

@hashincludeelectronics 10 місяців тому

Unfortunately it can not be done using this project . This camera can be accessed locally only . You need to use the party apps like Blynk to access the camera globally from anywhere in the world . Unfortunately I don’t have video using Blynk on my channel . You can check for reference on internet . 👌🏻👏🏻

@joshuaolaiya 10 місяців тому

@@hashincludeelectronics Okay. I thought it is webserver connected already. For example, I just need a router for the esp32 cam then while internet connected it streamed the video live to my phone at another country after turning ON my mobile data. Also, why is blynk different from this. I think they plan the same source as you either need a web or app so you can stream the live video.

@hashincludeelectronics 10 місяців тому

@@joshuaolaiya you can not connect to your local routers IP from outside . And even though you open port externally somehow , it’s dangerous . When using Blynk we send data to Blynk server first . And then from mobile we connect to Blynk server and receive the data.

@joshuaolaiya 10 місяців тому

@@hashincludeelectronics Alright noted. Thank you

@hashincludeelectronics 10 місяців тому

@@joshuaolaiya welcome 👍🏻

@moses5407 Рік тому

Any way to adapt this to control a remote camera via the web?

@hashincludeelectronics Рік тому

Unfortunately no. This can be controlled locally only . If you need it over internet then you will have to use third party app like Blynk .

@moses5407 Рік тому

@@hashincludeelectronics thanks for taking time to reply and for the great work!

@joshuacabauatan4430 Рік тому

Im using a 6v AA battery. Is that the reason why my camera not functioning and the prototype keeps on disconnecting?

@hashincludeelectronics Рік тому

Yes exactly. Please use rechargeable battery only .

@mdprojects9502 6 місяців тому

Bro what is the amp of 5v ac-dc adapter

@hashincludeelectronics 6 місяців тому

It should be more than 2A .

@mdprojects9502 6 місяців тому

Thank you bro

@mdprojects9502 6 місяців тому

Can we use mobile charger with 5v 3A

@worldinyourhand0 2 роки тому

i've issue my adapter was blinking when plugging to esp32 cam. My adapter 5v 2A just normally no problem in other. i confused in this, where's the problem..

@hashincludeelectronics 2 роки тому

Remove the servos and just try connecting to esp32 only . See if it works . May be servos are causing issues .

@worldinyourhand0 2 роки тому

@@hashincludeelectronics servo isn't problem i was checked and test

@worldinyourhand0 2 роки тому

@@hashincludeelectronics then i press reset button esp32cam, the esp led is blinking too

@debmalyadas8647 6 місяців тому

It shows connected without internet to NowISeeYou ssid. The light works well but the servos show no motion at all. Any solution??

@hashincludeelectronics 6 місяців тому

It should be connected to this ssid only . Please check the video 👏🏻👍🏻

@kymcainday6677 Рік тому

What changes should I make to make it work in station mode?

@hashincludeelectronics Рік тому

The code changes for Station mode are simple and you can find reference for it in my “getting started with esp32 “ video .

@kymcainday6677 Рік тому

@@hashincludeelectronics I uploaded the code and the slides are working fine but there is no video. just a frozen image. It just like it only took a picture then stopped. Do you have specific version of libraries to use? I already modified the library header file from 32 to 1 as you instructed, but still to no avail.

@hashincludeelectronics Рік тому

@@kymcainday6677 yeah the setting you changed from 32 to 1 should fix this issue . Make sure you re upload the code.

@kymcainday6677 Рік тому

@@hashincludeelectronics no, it didn't fix the issue. That's the first thing I did actually before uploading the code