Making of futuristic Three-Wheeler Vehicle - I Modified Scooter to the three wheeled vehicle

  Переглядів 7,141,589

Meanwhile in the Garage

Meanwhile in the Garage

2 роки тому

Making of futuristic Three-Wheeler Vehicle - I Modified Scooter to the three wheeled vehicle.
Friends,
Many of you have already seen my past video in which I converted a kymco scooter into an enclosed motorcycle,
I have read many comments in which you shared your opinion, thanks a lot for that friends!
Many subscribers asked to add another wheel for greater stability when driving, and there were also many suggestions to do something with ventilation, of course, they did not forget the wipers.
So in this video I will share with you how I continued to modify a conventional scooter into a three-wheeled vehicle.
If you haven't seen my first video in which I converted a scooter into an enclosed motorcycle, then I advise you to watch it too: • Making of futuristic m...
Now I am really sure that I have become one step closer to realizing my old dream, to make a motorcycle in which it will be comfortable to ride in any weather.
I used an quad bike as a donor, many thanks to my subscriber who made a big discount when I bought it.
By the way, I'll tell you right away, Yes! I myself was very sorry to disassemble such a cool quad bike for parts, but I assure you, in the near future you will see that I will use the remaining parts of this quad bike in one of the following projects.
I had to slightly alter the suspension to make the wheels a little wider and more stable, and I removed the retractable wheels for stabilization altogether.
I will not go into the whole process, I think the video will tell a lot more than I can write here.
When I parked this threewheled vehicle right in the city center,
many had no idea that this futuristic motorcycle was made in a garage, and not a factory one,
Taking this opportunity, I want to thank everyone who supports me and motivates me to do new things !!
Until next time friends!
Sincerely
Meanwhile in the garage
Links from the video:
Here you will find everything you need
English:
www.welding-machines.com/
Deutsch:
www.stahlwerk-schweissgeraete...
French:
www.poste-souder.com/
Rivet Nut Tool
amzn.to/2Z5EEJN
#MeanwhileIntheGarage
#HomemadeVehicle
#futuristicmotorcycle
#Doityourself
#Three-Wheeler
#FutureMotorcycle
#SelfmadeVehicle
#DIYVehicle
#DiyMotorcycle
#CoolMotorcycle

КОМЕНТАРІ: 6 600
@Vault57
@Vault57 2 роки тому
You have a prototype, now you need to refine the design to make it manufacturing friendly. Then go into production. Great commuter vehicle.
@eksine
@eksine 2 роки тому
yeah unlike that one company who scammed people by taking their pre-orders and never delivering, elio motors, scammers
@TheDiner50
@TheDiner50 2 роки тому
Prototype? It is just a scooter with a front mod that are made from a ATV? The cabin is really nice craftsmanship. But really there is no economy in making this since buying just the scooter is cheaper. And if you want a roof on your head then why not a SUV or a normal car? Electric if you want social cred. Really there is no space for this since SUV's are a thing. Phone and drive are a thing.. If there was any government that cared, THIS is what should roam around on the roads. Together with electric bikes and walking on foot people. But for that to happen so much of society have to change. And the ones in power do not want to in convince themselves by having there bents or BMW's or whatever go away. Imagen big cities going from cars to electric driven non safe to crash vehicles. And then have people learn to drive or get thrown in jail if not driving safely. But so much need to change for that to work. And war, war never changes.
@Vault57
@Vault57 2 роки тому
@@TheDiner50 Most inventors do use preexisting machines and off the shelf items to build their prototypes. They only need to confirm proof of concept. Then they can begin the process of refinement. Reducing part counts, determining sourceable parts from suppliers, establish jigs and fixtures needed for manufacturing the parts they produce themselves. Yes, it's nice to commute to work in a dry environment, i.e. a roof over one's head. That's why this is preferable to a scooter. Buying a SUV negates the potential cost savings of electric, plus the space required to park larger vehicles in space hostile urban environments. Electric is not just about going green for the reduction of fossil fuels and carbon footprints, etc. Again, in urban environments it is the potential to reduce the ever present noise of hundreds of thousands petroleum-based vehicles in constant motion. His vehicle is one of many that are on engineering "drawing boards" around the world. He built something with potential. Wouldn't you like to see him succeed if he desires to do so? The big auto makers of the world have sat on their status quo's for way too long. As much as I love my noisy, smelly gas guzzler...change is coming.
@eksine
@eksine 2 роки тому
@@TheDiner50 I believe the only thing they need to do is make an extra road and divide the lanes into weight classes, that way if you crash you won't die as easily, or something like this
@GCGomez
@GCGomez 2 роки тому
I agree!👍
@vlweb3d
@vlweb3d 5 місяців тому
THIS DESIGN NEEDS TO BE MASS PRODUCED. I would definitely buy one
@eraldorh
@eraldorh 4 місяці тому
Given that this all adds alot of weight the MPG is going to go down quite a bit so he would need to add a bigger fuel tank as the tank on the kymco agility city 125 that he built this around only has something like a 4.5 liter tank.
@s-uleiman
@s-uleiman 4 місяці тому
@@eraldorh You can drag a trailer with a barrel😂😂😂
@jamieevans871
@jamieevans871 3 місяці тому
polaris
@unknownname6519
@unknownname6519 3 місяці тому
Piaggio ape 50ccm
@openemailoneone6302
@openemailoneone6302 3 місяці тому
a lot of dead space. Imagine a moment that all cars became this kind of vehicle. this means 1 car for ONE person ONLY. The width is almost the same as a car with dead space
@DonJohn87_YT
@DonJohn87_YT Рік тому
Wish vehicles like this was as common as a scooter. The city I live in has A LOT of raindays per year so anything without a roof seem like a horrible experience, but for commuting to work etc this would be perfect!
@teacherrea5319
@teacherrea5319 9 місяців тому
Japan makes a really nice one with a back seat and more arm room. About $4K US to buy. 125cc.
@UKSJayarathna
@UKSJayarathna 5 місяців тому
Can you provide a link or the name of this Japanese version?@@teacherrea5319
@ironman8257
@ironman8257 13 днів тому
@@teacherrea5319 name?
@HigzyTeflon
@HigzyTeflon 6 місяців тому
Making 2 fenders out of a bucket was pure genius. What a beautiful creation! Love it.
@M3ANDER
@M3ANDER 5 місяців тому
Besides all other effort that I also appriciated most: Design according to occasion
@mikey52034
@mikey52034 2 роки тому
So let me get this straight... 1. No annoying talking 2. No annoying music 3. Awesome editing 4. Amazing content ........Subscribed!
@menopillion9853
@menopillion9853 2 роки тому
Agreed!
@griffinix4427
@griffinix4427 2 роки тому
No reverse lmao
@project6287
@project6287 2 роки тому
Agreed!
@iliketoridebikes
@iliketoridebikes 2 роки тому
don't forget actually wearing PPE so you aren't anxious while waiting for some metal shards to fly into en eye
@esqueue
@esqueue 2 роки тому
@@griffinix4427 Just put your foot out of the door. It's light enough.
@jx3449
@jx3449 2 роки тому
My favorite part of this is how you show that when one thing doesn’t work, you try something different to make it work. Most build channels I’ve seen most likely edit this parts out but the way you kept those clips of you changing out or redesigning a certain component shows the true nature of engineering and experiments, trial and error
@troykinnison4575
@troykinnison4575 Рік тому
Like windshield wiper
@aceaquino2125
@aceaquino2125 9 місяців тому
make it a 2-seater and I'm sold. This is incredible!
@joachimwestphal4839
@joachimwestphal4839 3 місяці тому
Hallo mein Freund, schade das man in den meisten Ländern nicht mit diesem tollen Fahrzeug fahren darf, sonst würde ich sofort eins bei dir bestellen. Leider sind die Gesetze da gegen !! Schade, ich hätte so gerne so ein " 3 - Scooter " !!!!!!! Mach weiter so, und alles Gute für Dich
@meanwhileinthegarage
@meanwhileinthegarage 3 місяці тому
Danke
@suhayl5157
@suhayl5157 2 роки тому
This is incredible; no pre design plans, no cut parts, no angle finder, no calibration; just design as you go. truly amazing.
@sketchy_loco
@sketchy_loco 2 роки тому
i used to do it as a kid, its really good when you just want to create something new and you have a vague final product idea, but planning is best if you have something specific in mind i think.
@gregz4249
@gregz4249 2 роки тому
I never saw use of tape measure either amazing
@dankrue2549
@dankrue2549 2 роки тому
@@gregz4249 I get your point, but.. 12:25 :P
@user-hs5cf5ig4n
@user-hs5cf5ig4n 2 роки тому
Thank you, my friend, for this video.
@luisbeck007
@luisbeck007 2 роки тому
sdf He needs to build one but full electric... then he can start an industry with this...
@ultramarinks
@ultramarinks 2 роки тому
Этого мужика нужно назначить директором АвтоВАЗа, так там хоть нормальные машины будут делать. Уважаю таких людей.
@dobr9020
@dobr9020 2 роки тому
ага, скажешь тоже, будет клепать тазы из тазиков
@mselyavko
@mselyavko 2 роки тому
Ну трубы гнёт он так себе
@6o6p2006
@6o6p2006 2 роки тому
он русский что-ли? акцент у него прикольный... %))
@mastermaster-be1zt
@mastermaster-be1zt 2 роки тому
@@6o6p2006 он Чеченец , живёт в европе,как то так.
@ciskavandevijver2355
@ciskavandevijver2355 9 місяців тому
it's great that you also show when it goes wrong..finally somebody who is not a "perfect"builder...respect for that..
@user-oc8fv3uq6d
@user-oc8fv3uq6d 9 місяців тому
Из года в год пересматриваю не могу налюбоваться этим Шедевром ! Почему невыпускают в доступном ценовом сигменте? Это мечта для путишествий ! Здорово ! Спасибо !
@_Angel_Dust
@_Angel_Dust 3 місяці тому
На азиатском рынке полно такого. Всё производят. У нас не продают потому-что спроса нет.
@JLock_17
@JLock_17 2 роки тому
I could see this kind of thing being really successful as a kit.
@meanwhileinthegarage
@meanwhileinthegarage 2 роки тому
Hello friends, Thank you very much for being there. I hope you like my video. Be sure to share this video with your friends, but also with the boss at work :-)
@associatedblacksheepandmisfits
@associatedblacksheepandmisfits 2 роки тому
Totally blown away ! Awesome work
@pineapplegritz7281
@pineapplegritz7281 2 роки тому
After the first one, i knew you wouldn't be able to resist NOT making it a 3 wheel. Great project!!!
@cyberhawk99
@cyberhawk99 2 роки тому
One of the coolest things I've ever seen! You are amazing!
@ogofficiallyghost7665
@ogofficiallyghost7665 2 роки тому
Wow amazing work think u need to up grade the engine and exhaust get more power be doing donuts in no time at all well done got me thinking about building my own but start with a 250cc
@aljunbautista7604
@aljunbautista7604 2 роки тому
Awesome work! Next thing your bike needs is reverse gear. After that your bike would be perfect 💯💯ps. Next time test drive your bike in night time and put a couple of light bars
@robertocosta6145
@robertocosta6145 Рік тому
Quando vi a primeira versão, pensei, não há segurança. Agora com três rodas, o projeto fica seguro. Parabéns!
@gphilipc2031
@gphilipc2031 6 місяців тому
I recently saw an Arcimoto in a local parking lot. Looks very practical as a suburban runabout. Your concept does as well.
@ericrobbins1060
@ericrobbins1060 2 роки тому
The way you made your own fenders instead of paying outrageous prices for already made ones was my favorite part I love when people use common sense and ingenuity
@Doriamo
@Doriamo 2 роки тому
Me too!
@downlowgo_401
@downlowgo_401 2 роки тому
Needs a bigger motor. Seems like it struggles
@PK-yl1og
@PK-yl1og 2 роки тому
Me too, love the fender part..😁🤭
@imperialdra-mon5907
@imperialdra-mon5907 2 роки тому
43 euro is nog that expensive tho
@jay-rus4437
@jay-rus4437 2 роки тому
Was really cool. Personally, I dont consider the cost for the fenders on the shelf outrageous, mainly because of the cost of doing business today. Think of all of the steps that take place before something is setting on the shelf available for us to simply walk in and purchase. Design, product sourcing, manufacturing, packaging, shipping, receiving, stocking at warehouse, shelving at store, general overhead for a retail space, insurance, staffing, and finally profit. This is a generalized quick rundown, but its just a reminder of how many things must take place, and how many people earn a living for each of those steps. Im amazed sometimes how much stuff we all have readily accessible to us. 😀
@Pencil0fDoom
@Pencil0fDoom Рік тому
Your freestyle, eyeball to measure, chop-n-weld on the fly style of fabrication is flat out astounding. You must have a professional grade CAD program running in your head. Most of us would just end up butchering two vehicles and be left with a bunch of burned out scrap. You made a functioning hybrid that rivals or beats anything in its class that cost millions to design and bring to market. Shade tree mechanical engineering at it’s best!
@katierscott8771
@katierscott8771 Рік тому
I have Dyslexia and am just finishing up a motorbike which is modified myself. All be it a conventional 2 wheels bike. I don't know if he does have Dyslexia, however being able to design in your head is so much fun and a trait that is definitely part of Dyslexia. Everything I modified on my bike was done eyeballed although I did use a lot of BOM style (look up Binky the amazing Mini) CAD design.. that is Cardboard aided design.
@aaronarroyo4885
@aaronarroyo4885 Рік тому
Lol
@wallywrench9844
@wallywrench9844 Рік тому
@@katierscott8771 Great video! Now I have more project ideas. I modified almost everything I own. Always have the plans in my head and have to make changes on the fly when things don't work. Have ADHD a bit of lexdicia and some CDO (that's OCD alphabetically correct. Never realized the gifts of lexdicia until you mentioned it. I do notice ADHD allows me and others that have it to hyper focus.
@WSallai
@WSallai Рік тому
Super upgrade to the original project! One suggestion I have is to add lock washers and thread-locker to all of your fasteners to prevent them from loosening from vibration. What a super trike!
@ACreations-tx4ui
@ACreations-tx4ui Рік тому
How much creative you are?? Le you: yes!!😊
@bummer6
@bummer6 Рік тому
y'know, the problem with this thing is that no-one is going to guess that it's home made. people will just assume you bought it because it's too damn nice! It's absolute perfection and frankly looks like it rolled straight off an assembly line (and cost an absolute fortune to buy)
@moteroargentino7944
@moteroargentino7944 Рік тому
Problem? It's a testament to his skills! I think it's where any serious DIY should aim for. Nothing wrong with putting aesthetics aside in a prototype, but who doesn't enjoy building something that's equal or better than "factory made"? It's like having your own limited edition product! 😁
@mareksuchanski4313
@mareksuchanski4313 7 місяців тому
Not going to argue, this is an excellent build. My only gripe is that I WISH the rear wheel matched the front two wheels... then I would be ready to place my production order :)
@novalav
@novalav 2 роки тому
Amazing. Please add a reverse gear
@cleniomartins8505
@cleniomartins8505 7 місяців тому
Olá saudações de Brasília 🇧🇷 o que observei e que você gosta de desafios. Sua inteligência e acima da média. Parabéns cada vídeo melhor que o outro.. A segurança agora ficou em outro nível 😊
@KetilDuna
@KetilDuna Місяць тому
Vehicle of the future indeed. I look forward to getting one, and the advent of the two-seater, the tilting turn-compensation and the heater system .. my eyes glaced over .. with dubs you could ride it during winter. Thank you for sharing!
@net-twin-de
@net-twin-de 2 роки тому
With this vehicle you should go into series production - you would probably become a millionaire overnight :) Really great what you did there.
@juanjolucenadiaz7027
@juanjolucenadiaz7027 2 роки тому
And electrical engine
@richardwallinger1683
@richardwallinger1683 2 роки тому
not a chance to compete against the Chinese. MMMM lot,s of goodies left over .. what is next.?
@BillyJoeJimBob28
@BillyJoeJimBob28 2 роки тому
Just get the Chinese to build it. 😉
@CarlosHenriqueNoronhadeAguiar
@CarlosHenriqueNoronhadeAguiar 2 роки тому
For and 10k BRL, i'll buy It with EYES CLOSED
@CheveeDodd
@CheveeDodd 2 роки тому
I'm impressed that tiny scooter moter could get this thing moving! That's a ton of steel! Motor upgrade next? 🙃
@autophile525i
@autophile525i 2 роки тому
I was thinking the same. Engine upgrade or add lightness.
@handjobsforthehomeless
@handjobsforthehomeless 2 роки тому
CBR900RR enigine, and a honda swingarm
@videomentaryproductionschannel
@videomentaryproductionschannel 2 роки тому
Lol, I new you were going to say that, I did think it though to be truthful lol
@maspais2533
@maspais2533 2 роки тому
Just put 300cc scooter engine.. Like Xmax
@jimmyking-gaming8453
@jimmyking-gaming8453 2 роки тому
yes
@skipstreet
@skipstreet Місяць тому
I cant believe how professional this looks. Ill have to go back and if the original build.
@0hface
@0hface 9 місяців тому
Lovely construction, you are truly a skilled mechanic. The only thing I would consider, though, is to switch sides on the tires to disperse the water outwards. The arrow pattern should point forward to cut through the water, and that way, you will have a better grip on a rainy day. Great job! Great video!
@caturnerjr
@caturnerjr 2 роки тому
This would be really amazing for someone disabled like myself to be able to feel the freedom of a motorcycle!
@jasonrobertson216
@jasonrobertson216 2 роки тому
This guy's tools are just impressive for sure, he definitely has a machine shop in that little garage, plus his obvious knowledge, perfectionism, pride, and professionalism is something to be admired & is what I love most about this video - not just the final product.
@helganikitov6377
@helganikitov6377 2 роки тому
Не] 5]]] 5ⁿ]её
@peterclaydon9782
@peterclaydon9782 2 роки тому
They all look new....
@kjellringstrom6217
@kjellringstrom6217 2 роки тому
Sponsored with them, otherwise he would not need to flash them like that in the video.
@jasonrobertson216
@jasonrobertson216 2 роки тому
@@kjellringstrom6217 duh, but not his press or lathe tho, not just anybody got them.
@michaelmanese2228
@michaelmanese2228 2 роки тому
I agree, and i Wanted to be Friends with him‼️😂 His Fabrication skills are Amazing‼️
@jihelge8761
@jihelge8761 3 місяці тому
excellent, it is a securely accomplished machine. Now you need a reverse gear (electric perhaps) a wider drive wheel certainly for tires like the front and therefore a slightly more powerful motor because it's all starting to be heavy. But the model is beautiful, rather successful, two round headlights with shell base on the front mudguards would be smart
@FtanmoOfEtheirys
@FtanmoOfEtheirys Місяць тому
I would totally buy one in the USA if they existed. One thing it would need is a heater, which could probably be fairly easy to create using a radiator type setup and the exhaust system to provide heat for the radiator.
@DonSchiewerJr
@DonSchiewerJr 2 роки тому
I can't believe you were able to get all of this done in less than 1 hour - Amazing!
@thechumpsbeendumped.7797
@thechumpsbeendumped.7797 2 роки тому
Yeh, that’d taken me all day.
@inb4230
@inb4230 2 роки тому
@@thechumpsbeendumped.7797 you need to stop procrastinating then man this is a 2 hours job
@thechumpsbeendumped.7797
@thechumpsbeendumped.7797 2 роки тому
@@inb4230 I know, I worry about not getting it perfect first time and it slows me down.
@inb4230
@inb4230 2 роки тому
@@thechumpsbeendumped.7797 mesure once cut it twice is the way to go trust me, you'll get near Chinese quality every time 👌
@Doriamo
@Doriamo 2 роки тому
I have a muscle disease and this would probably take me a couple months but the process is the fun part for me.
@atarifun2007
@atarifun2007 2 роки тому
Amazing. This guy did what Elio Motors has been talking about for the past 8+ years. What a great job.
@AdrianGonzalesgoing4th
@AdrianGonzalesgoing4th 2 роки тому
LOL funny cuz true
@fathybalamita1537
@fathybalamita1537 2 роки тому
Came here to make the same comment :)
@TeslaBulldotcom
@TeslaBulldotcom 2 роки тому
You can add Archimoto to that list as well, conversion to electric would be nice and some tilt, very impressive build all the same, love the wiper mechanism, need to send that to Elon for the cybertruck
@luisbeck007
@luisbeck007 2 роки тому
asdf He needs to build one but full electric... then he can start an industry with this...
@emotopdx
@emotopdx 6 місяців тому
Amazing build! I preferred the two wheel version since then you can tilt around curves like a safer motorcycle. I would love to see a yoke steering wheel! Keep up the great work man! Hello from America. 👋
@juliocesarvelandia3386
@juliocesarvelandia3386 4 місяці тому
Esa moto quedó una hermosura. Y lo mejor...Es que fue hecha solo en 36:29 minutos. Buen video. Saludos desde Cali, Colombia.
@banchaurairat
@banchaurairat 2 роки тому
The next part is the installation of reverse gear. After that change from 3 wheels to 4 wheels. Your work is flawless. 👍🏻
@dax4812
@dax4812 2 роки тому
and after that, remove the roof
@catgynt9148
@catgynt9148 2 роки тому
Have you looked at Elio Motors ? They have spent years attempting to develop what you have built. Thanks for sharing this insightful video. Wishing you and your team a great week. Cheers
@philippjulien8549
@philippjulien8549 2 роки тому
ELIO Motors was my first thought. Sadly they never gained traction. An idea a little to early, suppose so. As times change and the real economy is tanking, may be the concept of lighter, incredible gas mileage, back to basics, do-it-yourself repairs and maintenance and a low sticker and made in the good ole US of A has another chance. Anyway, do have some memories of ELIO Motors, someone I knew did their marketing. Jobs in Louisiana and American parts from other car makers bins, there was something about it.
@MegamanTheSecond
@MegamanTheSecond 2 роки тому
That's mass production at a profit with a market that wants what your selling in the first place vs him throwing 2 scooters together and doing some metal work big difference
@tonelloable
@tonelloable 2 роки тому
@@MegamanTheSecond you wont believe it, but is the same thing. With no difference xX
@g1tr3kt5
@g1tr3kt5 2 роки тому
I haven't even watched the video yet, but take my money.
@tOxIc_TrEaSuRe
@tOxIc_TrEaSuRe 6 місяців тому
OMG that bender made out of a flywheel --- total genius
@yngve6640
@yngve6640 2 місяці тому
I crashed my motorbike, ended up in a wheelchair. This trike scooter is something I would be very happy to have. Perfect vehicle for people in wheelchairs. You builded it looking like it was made by a famous brand. 👍
@michaelhughes7718
@michaelhughes7718 2 роки тому
Mutch more safer looking than the previous build. Also, I swear this is better than the A-Team after they get captured then locked in a fully tooled garage with a broken down vehicle and everything to turn it into a tank. I swear all this needed was the A-Team 'building' music in the background to raise this from a 10/10 to a 12/10. I love it when a build comes together.
@kchaitu4
@kchaitu4 2 роки тому
Good Job. Now it's time to upgrade the Motor, accommodate pillion seats, and go fully electrical or hybrid and above all, put reverse gear. You don't want to get out each time if you have to take it back.
@mikeanderson2730
@mikeanderson2730 9 місяців тому
Really cool motorbike, love the high quality look and the cover from rain and wind. With the big glass sides the small cabin doesn´t feel tight, and with the proper ventilation it should be perfect to ride in. You should swich side on the frontwheels, they are on the wrong side. (arrow tread should always point down in the middle to get rid ov excess water, to prevent watersliding.)
@diyathomevn
@diyathomevn 8 місяців тому
Hello, you have an impressive, very powerful, very beautiful car and a very healthy pond
@yelyab1
@yelyab1 Рік тому
Great job. In the US we call you Master Prototype Mechanics and Model Makers at the car companies. They make the experimental cars called prototypes before production. We usually provide them with drawings. You have it all in your head. Speeds up the process. Take the rest of the day off, you earned it.
@christianmccollum1028
@christianmccollum1028 2 роки тому
Keeping your cordless driver in it's case and your welding helmet in a helmet bag show you certainly know how to take care of your tools. Taking care of them ensures they will take care of you. Respectful observation from a new viewer in Texas.
@juanoscarrivera5845
@juanoscarrivera5845 3 місяці тому
Usted es un genio mis respeto para usted, saludos desde la República Dominicana!!
@albea1695
@albea1695 Рік тому
Fantastic build! That rivet gun looks like an amazing tool. Thanks for the video!
@dennisyoung4631
@dennisyoung4631 11 місяців тому
I have one like it. (Marson) Was needed for the bike trailer build.
@ashley-tm1uk
@ashley-tm1uk 2 роки тому
everyone will want one…so simple , well designed and executed…few refinements needed to take to market…looks as sophisticated as any high production products out there today…very impressive!
@Xener09
@Xener09 2 роки тому
How are these things not a commercial vehicle. For low- income Canadians who need a reliable and low gas mileage vehicle that can still keep them warm in the winter this would be incredible. I could totally see them being close to the $15k price range which is super easy for anyone to finance. If you live alone and dont need space for a passenger this thing is a dream
@imperialdra-mon5907
@imperialdra-mon5907 2 роки тому
Uhmm they do sell them the 3 wheeler scooters have been on sale for a while now
@Jebbles1
@Jebbles1 Рік тому
Imagine the money you'd make putting these into manufacturing and helping out thousands of young adults struggling to afford a car.
@chevyesteller3245
@chevyesteller3245 7 місяців тому
Solo una palabra HERMOSO!!
@AzOne095
@AzOne095 2 роки тому
вот теперь кассный аппарат. всегда, всем говорю - делаешь трайк? ставь два колеса спереди! Молодец мужик.
@christereder9776
@christereder9776 2 роки тому
pure skill. imagination, ingenuity and engineering! looking forward for the reverse module for this build
@normanmerrill1241
@normanmerrill1241 Рік тому
Fantastic design and alterations …all tri-motorcycle’s should offer an option of an enclosed cabin,,,they would become immediately popular…opening up a new body of consumers…
@heatice77
@heatice77 3 місяці тому
To have a dream in your head and be able to MAKE IT….I mean, that’s a super power. If I could do it again, I’d learn metal working, welding, etc….what a waste to not have skills like this.
@user-bw5vs6zp6x
@user-bw5vs6zp6x 2 роки тому
Классный аппаратик. Вот что нужно внедрять, а не эти псевдоэкологичные электромобили. Сколько сразу места на дорогах освободилось бы. Экономичный, недорогой, то что надо чтоб до работы добираться. Внутреннее пространство можно отапливать
@grb318
@grb318 2 роки тому
дурак совсем и не лечишься видно?
@andregustavo9871
@andregustavo9871 2 роки тому
Olá seria interessante vc instalar um motor elétrico para ir para traz ficaria perfeito com marcha ré.
@go0gleuser
@go0gleuser 2 роки тому
Вы должны прекрасно понимать, что в России подобные аппараты не обладают спросом. Он сможет реализоваться только как дорогая игрушка для покатушек по выходным
@user-bw5vs6zp6x
@user-bw5vs6zp6x 2 роки тому
@@go0gleuser Ну а чем она дорогая? Тут скорее менталитет играет роль. У нас народ предпочтет ездить на старом коптящем джипе годов 90-х, чем на этом.
@greenhat7742
@greenhat7742 2 роки тому
@@user-bw5vs6zp6x Климат, друг мой. Климат...
@spiritt69.2
@spiritt69.2 2 роки тому
Шикарный аппарат!👍 Респект за прямые руки и отношение к делу, побольше бы таких грамотных и толковых самодельщиков, а не балбесов, тырящих друг у друга бесполезные поделки, от которых толку 0. Такой бы аппарат при цене в 150-200к рублей был бы очень даже востребован. Я бы и сам от такого не отказался - мне по работе мотаться было бы самое то.
@johnbrand2574
@johnbrand2574 2 роки тому
До первых ментов самое то
@GraphicArtTime
@GraphicArtTime 2 роки тому
@@johnbrand2574 если узаконит то он приравнивается к мопеду, практичнее здоровых авто которые тратят столько энергии что бы перенести твою 5 точку
@_MadFox
@_MadFox 2 роки тому
@@johnbrand2574 умный человек сразу написал - у тебя есть прототип, теперь ты можешь запустить производство (только коммент на английском, не знаю, сможете ли вы это прочитать). Глупый человек написал - до первых ментов.
@user-nd8hq5mu7g
@user-nd8hq5mu7g 4 місяці тому
Молодец жигит экенсин рахмат, ото сонун жасапсын. ❤
@lucasn5460
@lucasn5460 2 роки тому
I love this new version, both aesthetically and practically. Reverse trikes do have a special place in my heart 😆
@luisbeck007
@luisbeck007 2 роки тому
asdf He needs to build one but full electric... then he can start an industry with this...
@dkprotek
@dkprotek Рік тому
He basically built a Can-Am Spider without the huge price tag
@gabzsy4924
@gabzsy4924 Рік тому
Honestly, with some airbags a design like this would make a lot of sense for modern locomotion. It takes a lot less space than regular cars making ideal for big metropolis with parking and traffic problems, plus it probably runs much cheaper both to purchase and maintain and I'm also sure it has a good km/L performance. Overall, pretty neat, I much prefer this design over the initial one, although I would still add a bit on an angle on those handles for better ergonomics.
@philipocallaghan
@philipocallaghan 11 місяців тому
No angle needed, it steers like a Tesla/K.I.T.T. steering wheel.
@johnbords
@johnbords 10 місяців тому
Also needs a reverse and maybe a wider body for better comfort, also the gas tank could have a cover, its too exposed
@TheSnoopyclone
@TheSnoopyclone 7 місяців тому
Have you never heard of a smart car? It’s smaller than a beetle.
@libertyforamericanow
@libertyforamericanow 7 місяців тому
Why not just ride the scooter? Takes less space
@ladron6161
@ladron6161 4 місяці тому
​@@libertyforamericanowbecause it has a car seat, it has a roof & windows. I have a motorcycle, car & I would still want something like this.
@breselyer
@breselyer 9 місяців тому
I wish I could actually get one of these. It'd be perfect for local travel. If I was Musk I'd be setting up a production line right now lol.
@Truong178
@Truong178 7 місяців тому
Tuyệt vời lúc nào xuất bản ra tôi mua một chiếc xe đẹp thật
@MrBuyerman
@MrBuyerman 2 роки тому
Honestly I wasn't a fan of the 2 wheeler, but I could see me buying and riding this version all day long. Really nice and let is know when the kit comes out!
@zeeone4492
@zeeone4492 Рік тому
It’s not a 2 wheeler
@MrBuyerman
@MrBuyerman Рік тому
@@zeeone4492 The original video has him making a covered 2 wheel scooter. Hence my comment.
@paulusferdinand1136
@paulusferdinand1136 2 роки тому
The wiper assembly is pure art!
@ClubOceanBlue22
@ClubOceanBlue22 7 місяців тому
Cool build! If you add some retractable propeller arms for flight, it's exactly what I was hoping for as a private personal transportation device. . 🚁
@fernandomoralles3706
@fernandomoralles3706 Рік тому
Muito bom esse suporte na moto...eu compraria nesse estilo 👍👍👍👍👍
@DARNEJITENDRA
@DARNEJITENDRA 2 роки тому
All it needs is a beefier engine and some off-road lights and it will be the meanest tricycle on road!! Awesome Build
@Baton1804
@Baton1804 2 роки тому
Здорово получилось. Было бы еще лучше сделать такой же но двухместный, чтоб пассажир сидел за водителем (по самолетному).
@Lil_Dogg
@Lil_Dogg 2 місяці тому
This is amazing, you know what is missing ? Neon led to make it cyberpunk ! But it's really amazing bro I would love to drive something like this
@timekeeperg9651
@timekeeperg9651 25 днів тому
great job man!!!! genius use of materials!!! like the fenders...super idea!!! when you put your mind to something this is the result!!! success!!!
@Mikhail-Milkhail
@Mikhail-Milkhail 2 роки тому
Вот что значит, когда у мужчины и руки есть, и растут из правильного места! Этого дядьку на слабо не возьмёшь! Оригинально! Классно! Супер! 🤣👍
@user-hy6ch3gx3i
@user-hy6ch3gx3i Рік тому
Он уже многое прошел)
@ImSpun13
@ImSpun13 2 роки тому
Can we all just take a moment to truly appreciate how extraordinarily talented this man is? His mechanical engineering ability is remarkable. There’s guys who go to prestigious colleges to get degrees in mechanical engineering and this guy is worth a hundred of them. When civilization collapses this man will single handedly bring us out of the dark ages.
@ireallyreallyreallylikethisimg
@ireallyreallyreallylikethisimg 2 роки тому
I don't get how everything has to be labeled as "engineering" now?
@ImSpun13
@ImSpun13 2 роки тому
@@ireallyreallyreallylikethisimg I mean that is what he was doing soooo
@videoleaks
@videoleaks 4 місяці тому
Good job. 👍
@tomaszstarkowski5436
@tomaszstarkowski5436 9 місяців тому
Amazing projects (both - the previous one and this) - *you are almost like Leonardo da Vinci*
@johnvonmartin7501
@johnvonmartin7501 3 місяці тому
Damn he got his genes and creativity
@nickc3213
@nickc3213 2 роки тому
Dude, you are like a real life Tony Stark or something, you have every tool in the world. So sick!
@luismiguel3914
@luismiguel3914 9 місяців тому
Your creation is wonderful, it would help me make deliveries in this rainy city.
@TheSkinking
@TheSkinking Рік тому
A roomier cab would have been nice, but you built it for a scooter initially, so I understand. Great build! I live in Canada, so I would like to build something like that with a snowmobile double cab, skis up front and a track in the rear sit on the motor
@freedomcustoms
@freedomcustoms 2 роки тому
Амортизаторы должны быть связаны в верхней точке, нужно ставить маятник, тогда с повороте будет управляться хорошо.
@cesarcayetano4649
@cesarcayetano4649 2 роки тому
Dude, if you make a four-wheeler with a passenger, you make history.
@bangudin3416
@bangudin3416 2 роки тому
Malu sendiri. aq bagaikan sampah teknologi.
@franciskusperi4621
@franciskusperi4621 2 роки тому
but you need more power for the engine
@keatonhatch6213
@keatonhatch6213 2 роки тому
You mean like a UTV? Lol
@nuggis
@nuggis 2 роки тому
Is cars not a thing
@tobiasmangoma9566
@tobiasmangoma9566 10 місяців тому
I think this is hands on engineering. No textbook, no drawing. Desing as you go Engineering.
@humanityfirst930
@humanityfirst930 Рік тому
I wish you live near by...I would've brought my two wheeler to you and let you go crazy building it and I would happily pay you for it too....Awesome just awesome...
@mlogan2k2
@mlogan2k2 2 роки тому
I've wanted something like this for myself for a long, *long* time. Seeing it built gives me a tiny pang of jealousy, but a much larger lift in spirits because someone *actually did the thing*. Kudos, my dude.
@AlmostAdv
@AlmostAdv 2 роки тому
Same, I've been day dreaming about something like this for years but based off a 250 or 300cc motorcycle, it's awesome to see someone do it out of their garage.
@edwinandrewartha3351
@edwinandrewartha3351 2 роки тому
Mlogan 2k2, Comparto tu sensación de celos y los deseos de tener uno igual para mi. En fin, creo que no se puede tener todo lo que uno quisiera.
@SERBiR86
@SERBiR86 2 роки тому
Классный кастом! Передние колеса лучше поставить поменьше, а вот заднее шире! Перед рулевой, заднее для тяги, и ещё бачок для омывающей жидкости и фарсунку на стекло! На передние крылья поставить дополнительно поворотники! И попробуйте сделать реверс, нужна задняя передача! А на квадроцикл поставить вилку спереди и будет трицикл только для внедорожник!
@thechumpsbeendumped.7797
@thechumpsbeendumped.7797 2 роки тому
He’s not going to have too much power so it’s better to have the 2 wheels at the front to give more stability in slippery conditions and also to be able to judge the width of the vehicle.
@vienta3216
@vienta3216 2 роки тому
Hay quá bạn ơi!
@moufung9464
@moufung9464 6 місяців тому
OMG ITS AMAZING!!
@user-xl2ui3hq8z
@user-xl2ui3hq8z 3 місяці тому
Excelente trabajo!!!!!!!!....Te felicito!!!....Saludos!! from Buenos Aires, Argentina.
@billsauer3164
@billsauer3164 Рік тому
I love how you manufacture everything so that it can be taken apart and reassembled with new parts when something breaks. Alot of people get carried away with the welder and make one big hunk of metal, looks cool but when you break a part you need to be able to get to it and isolate the smallest part to replace. I think your front fenders are the coolest part of the tricycle 👍👍
@grendelprime
@grendelprime 2 роки тому
I've wanted an enclosed reverse trike since first seeing the Elio concept, were this front-wheel-drive, you'd have already accomplished building my dream, awesome work Sir!
@normanrea8146
@normanrea8146 11 місяців тому
Beautiful design. Beautiful finished product. The only draw back for commercial sales ,is the lack of a reverse gear. That vehicle and a mini camper and away you go .
@lowkeysykes309
@lowkeysykes309 Рік тому
No music no talking just work, This is the content for me.
@borisgut306
@borisgut306 2 роки тому
Гениальный мужик, человек, которому все доступно!
@khalidshaikh4727
@khalidshaikh4727 2 роки тому
I will not be amaze, if this guy makes this scooter fly, outstanding skills.
@gadeeshi
@gadeeshi 2 місяці тому
Классно сделано! Только в пару к дворнику, надо было стеклоомыватель воткнуть.
@ignatiusdesouza6127
@ignatiusdesouza6127 5 місяців тому
This man is a genuine brain really loved the way he solves problems Mechanical and electrical, bro keep it up.❤😊😊
@attiliobastosguarnieri5416
@attiliobastosguarnieri5416 2 роки тому
Você merece um prêmio, cara !! ! !! Muita experiência também para projetar o que vc fez. Excelente.
@Dvirshe
@Dvirshe 2 роки тому
I really like your creativity, The idea of ​​making mudguards from a tub - that was ingenious ! This is of course after I finished getting excited about design and mechanics....
@Katsuhi50
@Katsuhi50 5 місяців тому
I know many cities in asia where overpopulation is an issue would find this sort of design very marketable, nobody likes getting stuck in traffic and some streets are actually too narrow for full sized vehicles.
@dockmasterted
@dockmasterted 6 місяців тому
I suggest you install air horns, so you can be hard by larger automobiles!
@mastercylinder1939
@mastercylinder1939 2 роки тому
This is great, you should go into production. Many people would love such a vehicle. Me included.
@mastercylinder1939
@mastercylinder1939 2 роки тому
@Will satan is working through you.
@LWRNCH6550
@LWRNCH6550 2 роки тому
Hope you guys get funding with unhindered creative limits to get this to the next level ! All the best !
Watch How I Transform this Wrecked Honda Into a Custom Motorcycle! - Full restoration
52:59
Making of futuristic motorcycle - I Modified Scooter to  the two-wheeled vehicle
1:11:47
Meanwhile in the Garage
Переглядів 56 млн
Артем Пивоваров х Klavdia Petrivna - Барабан
03:16
Artem Pivovarov
Переглядів 3,6 млн
Кровосток - разговор с легендами / вДудь
2:12:57
IS IT A CAR? IS IT A BIKE?  8 Coolest Vehicles You Just Have To See
10:05
9 Cozy BIKE CAMPERs | Micro Mobile Homes For Camping
10:33
Interesting & Creative Designs
Переглядів 1,2 млн
Man Builds Amazing All-Terrain Vehicle From Scratch | by @JamesBiggar
21:11
Carver review (2024): The Leaning Green Machine! | TotallyEV
8:01
TotallyEV
Переглядів 239 тис.
Someone in China Sent Me an Electric Micro-Car
26:29
EbikeSchool.com
Переглядів 2,3 млн
Insane Hubless Bicycle
6:37
The Q
Переглядів 52 млн
I Turned a Can am Ryker into a Off-Road Monster
22:55
Bikes and Beards
Переглядів 1,1 млн
I made my own car of the future with materials from the bottle yard
23:15
Thánh Chế - Mr Hồ
Переглядів 13 млн
I built a TANK for my son - Inspired by World of Tanks
1:13:45
Meanwhile in the Garage
Переглядів 10 млн
Нашли монстров в стене 100-летнего дома
0:17
Короче, новости
Переглядів 1,4 млн
【獨生子的日常】让小奶猫也体验一把鬼打墙#小奶喵 #铲屎官的乐趣
0:12
“獨生子的日常”YouTube官方頻道
Переглядів 43 млн