Yet more proof that no matter what size it is, a V8 with a supercharger will always sound awesome.

I can't wait for the next episode DSG GEARBOX AND NOS 👀👀👀

I don't like ads, but I do love the fact that you got sponsored!

The full size counterpart has teflon strips on the leading edge of the rotors to seal them against the case. Given your abilities and tools you maybe able to make something similar that would help with the rotor clash.

I really enjoy watching the problem-solving and quality engineering on this project. Great work!

Your machining skills are impeccable sir

18:14 - you only need brakes if you plan on slowing down. Never plan on slowing down. It's my motto...

That compressor sure sounds awesome!

Somebody: How many holes you need in base? JohnnyQ90: All😂😂

I would have looked at gearbox from an HPi savage. The gears are metal from the factory, it has a 3 speed upgrade option and it’s already designed to be mounted between frame rails. I would have kept the slipper clutch, it takes the shock out of the gears on the upshift since there is no other place to allow slippage to soften the shock load.

You know whatd be cool? You make an old realistic model of like a 1970s charger or older muscle car and put that in there to make it a functioning model. Another thing is woth the rotary engines you should make a 13 rotor like the one made irl. Thatd be fukin awesome, id pay big money to see a minature 12 rotor😂

Very cool retrofit for the super-charger. Seems like you have a pretty good ratio on the drive.. very snappy! Just the fact that you now drive it off the back of the crank will most likely make it more reliable. Well done Johnny!😉👍👍

I hate commercials but this one about JLC3DP was spot on...

😍😍👋👋Thank you for including JLC3DP 3D Printing to the project! Really nice work!

That supercharger's tiny intake and exhaust ports are going to choke it. I guess the engine's tiny intake ports are also too small too. Maybe some CNC porting now that you have a broken engine to experiment with?

Have you ever considered selling these?

You so need to take it out to a parking lot for a quick rip! I love this project, and your machine skills are impressive, I hope that the blower doesn't shred itself and even worse your new motor to bits, keep it up brother all love!

"The V8 RC car gets a Powerglide conversion" Fixed your title. Lol!

With the amount of custom work you already have to do, you might as well use their engine as a template and make one yourself but better lol.

I'm seeing Toyan everywhere and they're freakin fascinating.

Love every video as I live vicariously through your skills!

Amazing work! Some Teflon strips on the rotor lobes might be in order.

there's more passion for engineering here than there is enjoyment for the hobby. i can completely understand and respect it 👌

There is nothing you couldn't build. Mad respect

If you don't put a mad max themed body on this masterpiece I'll riot

As if this isn’t the coolest freaking thing in the history of the internet!😍

Good stuff! You should try a boost gauge on it, just to see what it's doing.

Wow, this is super cool I really enjoy this kind of contest. Thank you.

Quality as always Johnny.

Ever think about building a turbocharger? They make mini turbocharger keychains that are actually functional and rated for heat/flow. It's got a turbine housing, connected turbine and compressor wheels and everything. I think it'd be awesome.

My day is complete

There are some brake kits for 1/5 scale you could probably get ideas from. I ran hydraulic brakes on my mechatech but they also have cable actuated sets.

Omg,with that supercharger on there,that thing is wicked quick! But you’re right, heard those rotors clanging against each other at speed and the rear tire closest to the camera isn’t balanced at ALL,the other one doesn’t seem that bad however! I LOVE watching this build Man! Well done so far!❤

I was like "No way it's going to whine" It whines, and sounds awesome! Nice job!

Jonny Q90, the man with the solution for all problems :D

I'm watching from Japan!

A good real full size super charger has one groove cut length ways down the very top of each rotor blade with a teflon strip inserted into the groove cut slightly protruding pass the edge of the top of the rotor blade so it help center the rotor in the case as it turns and protects the case from metal to metal scarring and it also helps provide a better seal as the blade turns which means better boost and more power to the engine. Signed Carl J. Anderson

I think Robinson makes all metal gears for that TMaxx transmission, or use a summit trans , has hi and low and is built alot tougher

waiting for the day we'll see him building a RC car with a PDK gearbox

I want to see a racing series with the Toyan V8s, it would be spectacular to see the smallest of small blocks on the race tracks of 🇬🇧.

So professional and amazing to watch 💪

Impressive! Well done 👍

The supercharger whine seems louder than the engine lol! I love it!

I wish i had a machinist shop like you man i could do so much more things with my rc car

This is literal art. ❤

Only you can pull this off Johnny.

Sounds wicked with the blower! Just awesome content as always.

Once again, another awesome video. I love the effort you put into your builds. And the super charger sound is 👌

The dude has some awesome skills

Amazing work. Love it. 🤘

Wow, great job!

Nice idea on the transmission mounts

Fabulous work.

When you decide to use the reverse feature built in I highly advise you make very certain the car is at a full stop and at idle. I have trashed many reverse gears in my revo that I converted it to forward only with a center diff and then brushless. Also I eliminated first gear.

Bro this is nuts I absolutely love it.....❤

Love the quality as always.

17:53 I'm zoomed in on that unit 😊😊😊

Dude this is incredible love this type stuff, subscribed for sure!

You can hear the little Supercharger whining its ass off😂👏👌

this is truly amazing!

Duuuude! You and your channel are sooo amazing❤😊

Insane man....... Love it!

I'm passionate about that competition whistling V8 engine 😂😂😂 very detailed 👍

You should do a Q&A sometime. I would be interesting to see how you got into this. Was this a profession that turned into a hobby? etc. Great videos!

Revo is a great transmission.. won't survive your v 8 torque unless you leave some slipnin the clutch. Good luck keeping that consistent.

So impressed bro...not that it means anything to you, but amazing work everytime....I 9nly hope I can someday catch up to your machining skills

All this precision work, bro make it look easy ...🙌

That's the future of V8. Thanks EU for caring

Fricken brilliant

rolling road and all go ahead you legend

Good stuff man!

Now you can recreate the Mad Max Interceptor!!! Great work

gotta love the name of the fueltank? seamless... hehe can see the line across the entire thing.

I was going to say those wheels look a little out of balance. I don't know how you would go about balancing. Great video! Keep up the great work. Can wait to see what it can do/looks like when it's done.

Love that it started to make a real blower sound. Would greatly improve performance with modern style Hihelix rotors whether they be interference or not. And making sure if they do you have a decent coating of fuel along the whole rotor. Same as what we do full scale on our 6 and 871 blown race boats haha

LoL NICE ! Such a small engine with the sweet whine of a compressor where the noise matches absolutly to the size it has. Great 😁

I think it would be cool seeing you try to make an auto yourself like that sequential 3 speed you did. Could call it the 'microglide' playing off of gm's powerglide.

LOVE your videos.. I even watched the advertisements in it.

This is the coolest shit ever. Makes me want to go get a degree in mechanical engineering.

Can you remake the whole gearbox into metal? :)

A way to measure the output power with and without the supercharger could be interesting, maybe you could hook a motor and a variable load to do some basic testing. Nice work with the machining of the parts!

If this thing had an oil pan it would be full of confetti

I'm so glad you addressed the wonky wheels because it has been BUGGING me

Soooo when are you making your own supercharger?? You’ve definitely got the skills to do it. A twin screw will make a sick build

quality as always!Look forward to next episode😇

When working to trim plastic, skip the barrel sander and get a carbide end. Creates smooth cut and not a melted headache.

Been watching since the micro turbine days, everytime I see a new vid in my feed I instantly click and watch. Keep up the great work! Would love to see a lathe tour at some point as I have been considering getting one

Have you ever considered building a Dyno for testing your amazing engine work and performance upgrades? I’m sure it can be done in scale from 1:1 versions?

At 3:07 you can also set the endpoints for the servo on the transmitter, to stop the servo arm bending the material

I'm not entirely sure the added power and throttle response was caused by any sort of boost. It may of been because surface tension causing fuel to stick to the rotors until its reached high enough rpm to sling the fuel off causing it to burn giving more power. Awesome video and I love all your stuff.

One of these days hell get a rc car big enough for the entire family 😂

You better take that motor completely apart, as you probably introduced metal shavings because of the rotors banging!

A while back, I had a 1/5 scale FG clone I wish I could have done all of this to. If there is a way to cycle oil through the system to keep that supercharger from eating itself, that thing is going to be a beast. Looking forward to seeing the progress

I sure can see where all of this is heading. 🙂

You added Hellcat Red-eye Whine to it xD I am also worried about the rotor slap in the supercharger, even if they bed into each other all that metal is going straight into your combustion chambers and probably hurting the pistons a bit :\

Love your work

Omg, it sounds sooo good

Ah going down the same rought i did!. Great transmission. Using the same on my Howin L4 172 build.

That's a toy? Geesh, I think the gearbox will pack it in, handling the motors output 😂

That is so sick