Cheers for the heads up, downloaded and DI2 update applied.👍

Don’t have Di2 so no idea why I watch & enjoy the videos so much! 🤔😂

i know what i have planned for this afternoon! 3 bikes with Di2 to play and update with :)

the intro makes me... sick ;-)

Wicked Pissah Cool GpLama think 🤔 I might get that Wireless unit for my di2😁

Looking forward to the details on S1 / S2 !

In case anyone else gets bricked by EW-W111 firmware upgrade: 1. Unplug everything (battery, front and rear mechs, junction and EW-W111) 2. Wait a minute. 3. Plug in the EW-W111 bottom only (not the top junction side) 4. Plug in the battery 5. Connect with ETube app 6. This will update your EW-W111 firmware several times. 7. Once done updating 8. Disconnect app 9. Plug everything back in 10. Reconnect App 11. Happy Days

Hi Using the Shimano E Tube app, to fine tune my R9200 derailleurs. Took some fiddling to get the best performance, but noticed on the rear it needed an offset almost to end of range. That’s the trim adjust. Is that telling of a mechanical issue? This is a 2022 Canyon new out of the box. I also front the automatic set up of the front derailleur did not work great. After I did it as the app directed. the chain dragged on the lever fairly hard. I just when back and adjusted to knowing the way it needed to be trimmed to be happy. Very interesting but …

Nice video as usual Shane! Waiting for a the full review of this app and also a video on the Giant power meter on this bike.

Thx Shane. -U10

Brilliant!!

Any sign of Shimano bringing out sprint shifters for disc brake bikes?

Great video Shane. Made my life a lot easier. Thanks for that

Any chance to help out how to unable the LIGHTS in the app? I bought Lupine SL and on the unit display the lights are disabled.

I tried to put ew-wu111 on my bike, but when synchronizing with the cell phone it says "an unknown master unit is connected check the master unit". do you know how i can solve it? my battery is SM-BTR2 (the battery box says it is compatible). thanks

Tried to reindex the rear derailleur under “maintenance” tab but very confusing. It said to move the chain to the 5th down from the largest sprocket but you can’t do that electronically when you’re in setup mode. I had to manually push the derailleur across in step 1 and then hold it there while completing step 2 before logout. New indexing seems to work but there was a massive change in the index adjustment figure for an indexing that was pretty good before I started using the new E-Tube update. Did I do it correctly? Looking fwd to when you cover this in future vid

Unfortunately mine has never worked since the update, I have to use the lap top to customise, I have tried to sort it a number of times but got bored.

Help please.should my ewwu111 always be on? Whenever I open the etube app, the unit can be found without the di2 being woken up. Is this right? Or is this draining my battery?

No issues updating firmware from either Android or iOS. However on Android I created a Shimano ID and can log on fine. With iOS if I go to the logon screen it just displays a mostly blank page with nowhere to type ID and password.

Hey Shane, sorry little off topic BUT does the new TCR you have fit on the original tacx neo? I’m looking at getting one but unsure about brake clearance. Cheers Baz.

Shane, do you know if you can turn off the cross chain preventing setting with the Bluetooth unit, or is it smpce1 only?

Thanks for the video, I noticed that you have set your rear derailleur for fast changing, what was the reason behind this? do you notice any difference from normal?

are the shift buttons customisable for each shifting mode? e.g. if I want more of an E-Tap style left hand downshift / right hand upshift for synchro, but standard shift buttons for the manual mode

Now it's tome for SRAM to update

@shane do you think there will be a new dura ace or dura ace di2 out anytime soon?

An EWWU111 is required (bluetooth only)? Can this be done with a cabled connection to a Windows system with the E-Tube app installed?

Can't find the app in App Store, is it area ristrection?

Hi Shane! Ever since I upgraded the firmware of the EW-WU111 to the latest, v4.60, the wireless unit now always broadcasts connection mode which drains the battery far quicker than normal. In other words, I do not have to press the junction box button for 2 seconds to begin broadcasting connection mode so I can connect to the E-Tube app on my phone. Instead, as soon as I launch the app, the EW-WU111 always shows up when I tap the (+) button. I have confirmed that I configured the wireless unit to only broadcast in ANT+ mode and even tested to ensure that when switching from ANT+ to Bluetooth or Off, the wireless unit cannot connect to my Gamin head unit which only uses ANT+. However, as I learned from you, this configuration only affects the connection to head units, not the Bluetooth management connection mode which is now always broadcasting. Have you experienced the same or did I bodge the firmware upgrade? This is possible since I did it wirelessly with the E-Tube app which lost connection during the upgrade so had to follow BetterShifting's "How to recover from a failed Di2 Wireless firmware update" post for which I am grateful. Thanks for sharing your knowledge with us!

How do you select the synchronized shifting options between S1(semi-synchro) and (S2 synchro)?

Can I put the EW-WU 111 anywhere in the chain? ie; Between the internal battery and the B box in the seat tube?

I just happened to need to connect mine on 9/1 when it dropped and then got surprised with this new app. But then I forgot what passkey I set 🤦‍♂️, time to get the laptop out.

Hello, how is the procedure to put a new key of the D-Fly in-wu111, since the default 000000 does not grab it and I do not know how to change the key, thanks

/Do you know if there is a way to add custom chainring sizes? My Giant Revolt came factory with 48/32, and that option is not listed in the app.

I just got the Aethos Expert bike and looks like I have the 8050 Di2? Do I need to buy the Bluetooth module or is it built in?

Bricked my bike, I unplugged the battery and the module. (Also make sure charger is not plugged in). I then reconnected the battery, connected my computer. I then plugged in the wireless module and discovered my bike. The computer app found everything and saw the ew-wu111 needed an update, sent the update from PC and it worked. So far so good.... DON'T UPDATE VIA BLUETOOTH!

Hi There, can someone tell me- if I add the EW unit, can I then just connect to it with my Garmin or do I have to go through the e-tube app? Have only just got my DI2 bike and worried about bricking it. Thanks!

Do you know if it's possible to change the standard cassettes in e-tube? I have an 11-32 cassette with the short cage derailler. You can't select this combination in e-tube as far as I know.

I barely dare to connect via my PC (borked my entire bike once, for no reason), EVERY TIME I try to use the app, I'm left without a bike.

Any idea why not all cassettes are shown in the app? Even some produced by shimano are missing (11-32, 11-34...). It seems isn't possible to customise them either. 🤔 could it affect the functionality if I install a cassette not available in the app?

if i install the bluetooth unit EWU 111 on my bike, will there be a interference problem with my Dura Ace DI2 Powermeter?

Hmmmmm....now how do you do it on the new R9250??? Just got new 12 speed and bc it's not worked I need to wire them...? 🙃

Anywhere in your videos on how to reset a passcode in e-tube?

Is it possible to use lelf lever to change rear gear?

Silly question, is it possible to implement a shifting pattern more like SRAM Etap? I know I can set both left shift buttons to shift to smaller cogs, and both right shift buttons to shift to larger cogs, that is easy. But I was not seeing an option to do the "double push" from both sides for the front shifting.

Does using this latest version still brick the system every time you try and connect over BT? I'm scared to try it after numerous failed attempts on the older version.

for using App the D fly module is needed??

I have a question. Where did you get your pass key to be able to connect the shifter to the phone

When I press onto the di2 junction to engage bluetooth the lights don’t flash. Any ideas?

New app does not show Di2 battery level! Or am I missing something? (Old one showed bars.)

Have a look at the ratings in the App Store - 1 star average. It won’t get past the checking for E-TUBE projects page for me, but is seems I am lucky as it bricked many Di2 systems. Surely Shimano actually test this stuff?

Nice video! But how do I know my passkey? I have never connected my di2 to any other device. Do you know if there is a default passkey? Thanks

Im not seeing a clear way to disable Synchronized Shifting. Is it me? Confused. I want to control everything manually.

Noob question, does the app work "hard wired" to an android phone? ..as I don't have the wireless module.

After this update my app keeps saying Bluetooth connection interrupted. I can’t connect etube app. Anyone else having this issue? Still connecting to my Garmin so I know the ANT+ is working.

Do you create your own passkey or is there a default key?

For some reason I've never been able to connect with my phone, only my iPad. Always says the bluetooth connection was interupted

where was you pass key sent? I get the 0000 or 1234 as options and they both don't work.

Hi how do we get the pass key? The original 00000 doesn’t work?

How can I select the Shift Mode in the App..I’m gonna go crazyyyyy. Cause somehow i can’t do it with the old setup since I’ve installed the Bluetooth device. Hopefully somebody can help :D

This bricked my di2. Had to re install everything. But working again now

Where do i find this pass key or better said what is that?

Hello everybody. I am looking at the video cause I am going to update my DI2 Ultegra. what is the passkey requested? Thanks in advance

where I take the passkey ????

We need MacOS app too!

No matter what I do, I cannot get my TCR to go into this mode. I have tried EVERYTHING.

Well the new 4.0.2 PC version of E-Tube is a joke and full of bugs, I missed my Sunday ride because my new GRX Di2 stopped working and battery went from 90% Saturday to almost flat and shifters etc not working! I could not work it out phoned Shimano about the problem and they had no ideas do use the new 4.0.2 and run it through the testing process! It came down to me talking with a customer who said here read this email. Well I have stopped using 4.0.2 PC version and back to 3.4.5 version and the Di2 is all good, so disappointing with Shimano support as I work in a bike shop.

Anybody know how to reset passkey?

Where do I get my passkey?

Bagaimana caranya kalau di aplikasi e tube saya lupa password nya

subtitles in spanish please!

Just killed my bluetooth module while updating it. Noooooooo.

S I opened the app and my iPhone tells me the etube app copied from Facebook. What in the actual duck!

i SOLD my ultagra Di2 and I fix R8000 mechanical Ultagra because they don't have program for apple MAC they still use windows