Ultimate Guide to Smart Home Sensors + ideas

День тому

There are a lot of indoor smart home sensors out there, but this video will help you sort through the mess and find the best ones for you. Plus I’ll share lots of sensor ideas along the way.
Links (affiliate):
-Contact Sensors-
Linkind: amzn.to/3tyaOaB
Aqara: amzn.to/2RtWL8D
Ecolink: amzn.to/2R2Alvd
Ring: amzn.to/3vMB2aB
SmartThings Multipurpose: amzn.to/2R0UCRF
-Motion Sensors-
IKEA: www.ikea.com/us/en/p/tradfri-...
Sonoff: amzn.to/2PTU3sn
SmartThings motion: amzn.to/3tsw0yx
Philips Hue: amzn.to/3b9nzBN
HomeSeer HSM200: amzn.to/2QZv4Vc
Aeotec 6 in 1: amzn.to/3toN9JA
-Less Recommended Sensors-
AGSHOME: amzn.to/3eWPJ4d
Wyze Sense: wyze.com/wyze-sense.html
Linkind: amzn.to/3b660Tp
Inovelli 4 in 1: inovelli.com/4-in-1-sensor-z-...
Zooz 4 in 1: amzn.to/3tsqT1c
My shirt: threadless.78cfvm.net/Xxmd2a
SUBSCRIBE so you don’t miss more smart home videos: ukposts.info...
MORE INFO on connecting the sensors to SmartThings:
1- Aqara: Add this device handler raw.githubusercontent.com/bsp...
Then hold down on the sensor button 3 seconds to put it into pairing mode. Scan for nearby devices and it will add it.
2- Linkind: Push the pin button for 3 to 5 seconds to put it into pairing mode. Then scan for nearby devices.
After adding it, go to the device type in the SmartThings IDE account.smartthings.com
Change the device type to SmartSense Open/Closed Sensor
Then you have to remove the device and re-add it using the pin button. After that it will work.
3- HomeSeer HSM200: Follow these instructions on adding the device handler docs.homeseer.com/display/HSP...
4- Hue Motion Sensor: Here are some instructions on how to do it community.smartthings.com/t/h...
0:00 Intro
0:31 Contact Sensors
3:53 Motion Sensors
5:22 Advanced Motion Sensors
8:39 Less Recommended Sensors
9:55 Favorites
11:32 Sensor Tips
12:04 It’s getting hot in here
DISCOVER MORE
Next Level Automations: • 10 Next Level Automati...
25 Automation Ideas vol 2: • 25 Home Automation Ide...
12 Alexa Routines: • 12 Cool Alexa Routines...
MY SETUP & GEAR
See the list of everything I use in my smart home and other favorites:
www.amazon.com/shop/smarthome...
FOLLOW ME
Twitter: / smarthomesolver
Instagram: / smarthomesolver
----------
MUSIC
The End by EVA
open.spotify.com/artist/6UIs5...
Disclaimer: Smart Home Solver was sent HomeSeer and Inovelli 4 in 1 sensors for unbiased reviews. As always, our opinions are 100% our own and not influenced.

КОМЕНТАРІ: 613

@IndiaRoverMayank Рік тому

Can you please make a 2023 version of this video. I am sure everyone would love this.

@user-jj5oi3xk1j 6 місяців тому

Reviving this comment

@denniszhaunerchyk6191 5 місяців тому

I'm fa of this guy. I'm sure he'll do this for all of us at some point.

@Manaiakalani206 5 місяців тому

@rahulbobhate 4 місяці тому

@user-cx7zo9xl6n 4 місяці тому

2024*

@tpch3ckyourt3ch75 3 роки тому

You are like the Jedi of smart home tech. Great video

@WarpedFlayme 3 роки тому

7:55 The UV won't change because your window is filtering it. Otherwise you'd get a sunburn just having your blinds open. Maybe you could use that as an alternative to a contact sensor to tell if windows or doors are open?

@philipcooksey3422 3 роки тому

Was thinking the same thing right away. But it's definitely not a common sensor to use in automations

@SmartHomeSolver 3 роки тому

I opened the window and it still did the same thing with sun shining on something right outside the window. So I tested it again in direct sunlight and it worked but barely. The sensor was still pretty weak so I’m not sure how useful it would be.

@JoeAiello789 3 роки тому

@@SmartHomeSolver I'd be curious to see it pointing straight up outside and compare it to Accuweather's claimed UV Index. (although I can't think of a Use Case for knowing) Plus, Warp's correct, new windows have lots of UV protection built in.

@BrandonLujan 3 роки тому

@@JoeAiello789 even just glass blocks uv light with no addons, but it can get better with additived or double or triple glass, as is now common.

@daniel_s 3 роки тому

Glass only blocks uvb and uvc rays but not uva which is also dangerous to the skin

@liammcgarrigle 3 роки тому

For the UV sensor not working, it might be because it's pointed at a modern window. Modern windows have 2 or 3 panes with an e coating, which does a good job of blocking UV and heat radiation. I'd give it a try through an open window before writing it off. That being said, i have a few of those sensors and i have found everything other than motion is a bit unreliable. My favorite part of the aeotec sensor is the recessed mounting plate and that it can be hardwired, which is a must for me because I'm lazzzzzy and never want to change batteries

@PyroChimp75 Рік тому

I believe you are correct, most glass blocks UV and IR light

@davidharraway8131 2 роки тому

Thanks for the great review and especially the real world examples of what you can set these up to do. I work with people with disabilities and there are so many useful applications that sensors can be used for to improve quality of life and safety.

@OtakuDYT 3 роки тому

The range of products your review is exceptional, much more useful for making informed decisions, thank you!

@reidcardwell 3 роки тому

Perfect timing on this video. I'm tearing out a lot of the one-off devices I have and trying to consolidate on fewer brands just to make things easier. Sensors is one area that I was not looking forward to researching, so thanks for doing all of this for us!

@asahi43 2 роки тому

I appreciate a man who knows the difference between “less” and “fewer”

@lincolnviniciustaparosky2001 3 роки тому

I recently bought qingping motion and light sensor and some Mijia temperature and humidity sensors. Both use bluetooth, but they work great on Home Assistant. Love your videos!

@kare2share Рік тому

Great job on covering most of the common sensors, you may want to consider including a water/leak sensor which is bery important to prevent leaks.

@Jonathan-pz3zb 2 роки тому

Thank you for doing these excellent videos!! VERY helpful. I love that you keep it straight to the point.

@apwelsh 2 роки тому

I have been through a lot of motion sensors, and the Hue motion/light sensor is my favorite. It is reliable over the course of a year. The Aeotec are good when you need humidity, but for the price, they really eat through battery life quickly.. and they fail to accurately report battery life when using lithium batteries. For door sensors, I prefer the Aeotec recessed door sensor. It's very quick/responsive, and have exceptional battery life (on the 700 series model).

@michaelmcelrath1163 3 роки тому

Visonic sensors have always been my favorite. They are TINY, no logo, super easy to pair, they can be modified to be water sensors, and they were only $10 each. The price eventually went up to $15 (still great) and they eventually sold out. Can barely find them anymore now :(

@derekl_ 3 роки тому

I have been looking at sensors lately so this is definitely a timely video. As for your sensor pointed out the window not seeing a change in UV when the blinds open, windows have a UV filter either baked into the glass or applied as a film over it (or both). Move the sensor outside as a test and you should see a change.

@SmartHomeSolver 3 роки тому

I tested it in direct sunlight and the UV sensor did pick it up. I also tried it with the window open not in direct sunlight and it still didn’t pick up anything. I’m not sure how useful this would be with how weak the UV sensor is.

@Transamws6prg 2 роки тому

@@SmartHomeSolver have you had a chance to look at the Konnected product for homes that prewired

@RiceEater483 2 роки тому

I'm super late to this but I want to advocate for Yolink sensors. Both their door and motion sensors are great. They have great range, fast reactions, and most importantly they're cheap. Highly recommended for those on a budget who while still being high quality. And they work with Alexa to set up routines so I have several around my home to turn on different thing at different times of the day.

@lance3198 3 роки тому

I literally just thought about what am I going to do when I want another contact multi-purpose sensor now that smart things doesn't sell it thank you for this video and hopefully aotech gets their act together

@Trotamundospatricio 3 роки тому

Great video! The only thing is missing are outdoor sensors, for example if u want to use sensors in the garden or outdoor gates

@jaymolina2779 3 роки тому

Hey Reed, thank you for this breakdown on sensors. I have the ring security system with contact and motion sensors throughout the house. Please come up with a video on how we can properly use ring security with Alexa and ideas on how we can further advance our home automation. Thank you for your great content

@rody9331 2 роки тому

i second this! Would be great to see ring security and alexa and what can be set up using this ecosystem for us novices

@Homerunhittergirl 3 роки тому

Yay!! Thank you! I’ve been wanting this video for a while!! You da best!!

@ThePrimeMinisterOfTheBlock 2 роки тому

Thanks friend, with so many sensors out there this helps narrow down what to buy

@superserialgeeker 2 роки тому

Nice shot man ! I’m using all day long the Sonoff and they are a bit tricky to install first but after they really work well.

@Blueridgedog Рік тому

I use the Aqara Motion Sensor, very satisfied. Also, with HomeSeer you can use BLRadar and create motion zones so you group sensors for given zone (I use three in my shop for example and if the entire zone is inactive for three minutes, it turns off the shop lights...lots of electricity savings).

@briancrounse7473 3 роки тому

Great video. I found it amusing for you to easily see the garage door was open, but then have to actually walk to the garage to close it...

@Joseph2290w 3 роки тому

Thank you so much for all your helpful videos! Is there a way to get the Hue Motion Sense to trigger other brands of lights?

@diegowlp 3 роки тому

Thanks again for the amazing content. I wish you bring more information about devices and alexa's hub. I tried to use sonoff motion sensor with it, but it was a nightmare... I bought Hue sensor and worked pretty well.

@kahlilfeliciano1177 3 роки тому

Great Video, just what I needed. Quick question do you know if the Ring Motion sensor can also be used to trigger routines?

@timmy8784 3 роки тому

Another great video! Appreciate the work you do!

@kirstenbakker839 3 роки тому

I have good experience with Aqara motion sensors in my SmartThings system. They detect motion (2 minutes cool down) and light intensity, plus they're quite cheap. They are pretty cute looking and they come with a tiny adjustable bracket. I use them in my house to automatically switch on the hallway lights when motion is detected. But only when the light intensity in that space is below the 30 lux threshold I set. This way the light only switches on when needed at night, or during daytime in our dark dark winter months. Works like a charm!

@arnonuhm2409 2 роки тому

Same here...was missing it in the test

@mateipanet 3 роки тому

exactly what I was looking for.Nice video!

@karimlahri7760 8 місяців тому

like the features, setup was difficult for some of my devices (August Door lock, ukposts.infoUgkxhB5YOMNj04GuoAosExygP4cH-dKeb4aB Bose speaker)... but all switches and outlets (5), thermostat, tankless water heater. Unfortunately all I can do is turn on/off Bose. It doesn't support volume or changing channels, but I believe that is due to the particular speaker I have.... Worth getting if you already have other devices to use it with... I don't sit around and ask Alexa questions much so that doesn't really matter to me....

@jomotech 3 роки тому

Great video my friend! Cheers from Portugal! 💪

@blinton31 2 роки тому

This is a very useful Video - Much Gratitude!

@TechTutorialsDavidMcKone 3 роки тому

Good to see lots of options available so thanks for this Reed Have you updated the firmware on the Aotec sensor as that might fix the UV issue? At the last check it was up to v1.14 and the hub should tell you which version is being used They are very pricey I admit, but part of Aotec's appeal for me has been compatibility, ease of integration with different vendor hubs and the potential for over the air firmware updates Although at the time I bought these, there wasn't much competition and what really sold me was that they could be powered from USB Motion detection alone was no good for me and so with this model the lighting rules also taken into account the light level the sensor reports to decide whether the lights should come Aotec have since come out with a recessed mount for them which is also something to useful consider as well as they'll be less conspicuous The Aotec door/window sensor 7 has proven to be pretty quick and the battery life should be around 3 years. They can also get OTA updates But even though they're slim and blend in well on the inside of a recessed door where the frame isn't flush, the price would probably put most people off, especially given their purpose and what else you've shown is available

@leenoone5659 3 роки тому

I'm after some sensors so glad you uploaded this

@DrRichardRoberts 3 роки тому

You should review the NYCE ceiling motion sensor. I have gone through many Zigbee sensors for my SmartThings then my Hubitat hubs. The NYCE uses Zigbee and runs on two AA batteries. With lithium batteries, the sensors still show 100% battery capacity after three months of use. Previously I had SmartThings and Centralite sensors which went low on battery life at various times due to using button batteries. Of those two, Centralite was the best but now, for Zigbee motion sensors with very long battery life, I have switched over to NYCE and I'm thrilled with the redults.

@streetwiztech5505 3 роки тому

As always.. great Video Reid, keep up the good work buddy..

@praveenraj2955 3 роки тому

Thanks for the video. It was quite helpful to chose from the range of contact and motion sensor. How do we connect them with my home automations hub?

@fjanahi 3 роки тому

Thanks for the wide range of items mini review 😁

@thatsdaniellelol 3 роки тому

YEEEEEESSS!!!!! Thank You SO MUCH I have been looking for a video like this for a 👏🏾WHI👏🏾LE !!! Thank You!

@georgekappe1934 2 роки тому

Like your videos Reed. One thing not mentioned is the Agara sensors require their hub to work, which adds to the cost.

@damichl9684 3 роки тому

I love this comparison!!!

@SmartHomeSolver 3 роки тому

Thanks for watching! Links to all the sensors and SmartThings device handlers are in the description. Let me know what you’re using. **UPDATE:** Thanks for all the comments about the UV light. I did some more tests with it today to see if my window was filtering UV light. I opened the window on a bright sunny Arizona day and it still read 0. Then I tested it in direct sunlight with the window both open and closed. With the window open it was 3 out of 255, and closed it was 2 out of 255. So yes the window does filter out some UV rays, but unless the sensor is in direct sunlight it might not pick anything up. There maybe some use cases for the UV sensor, but for me it’s not sensitive enough.

@xfactortech643 3 роки тому

Can you shout me out? You inspired me to make a smart home channel

@kane587mad 3 роки тому

@8:18 Your windows may have UV light filtering. That's causing the sensor to not detect a change.

@0h2ezy 3 роки тому

Hey Reid, what sensor would you recommend for your mailbox? I am having issues connecting through my metal mailbox, but I only have a Wyze. I’ve tried both motion and contact.

@YoLinkbyYoSmart 3 роки тому

@@0h2ezy Try the long range wireless YoLink sensors. YoLink sensors can work more than 1000 feet away and use 2 AAA batteries, the battery life more than 5 years. It uses the LoRa technology vs other wireless wifi, zigbee and zwave, YoLink is much longer range and lower power and more secure protocol.

@marcberm 3 роки тому

Hey as far as the UV sensor goes... Of the total UV light, 95% is UVA (the aging kind), and 5% is UVB (the burning kind). Sensors are usually designed to read only one and calculate the other. Most UV doesn't make it through modern low emissivity window glass, which you no doubt have in AZ, and so that's probably skewing your test. It might be interesting to try an outdoor test on a bright sunny day to see how it compares to, say, the current UV index that the local weather provides. The upshot is that skin is mostly shielded from the (burning) effects of UV light by normal everyday window glass, so there's that. 🙂

@sulyluu 8 місяців тому

Love the video's I cant seem to get my Aqara vibration sensor to do anything with smart things, I may need a differnt driver? I would love a video on navigating the new smartthings devices page.

@sergiyrudenko905 2 роки тому

Thanks! Your videos are amazing!

@619easyfix 2 роки тому

I like the signal strength tip. Is there anyway to get access to this info without a Samsung SmartThings hub? I currently have Philips Hub, am going to be adding couple ZigBee light switches (connected to Echo Studio), setting up a Raspberry Pi, and probably either the Hue motion or Aeotec multisensor after watching your video.

@dmob10 Рік тому

I have the sonoff for my laundry room. Works great for turning on the lights

@neekster28 3 роки тому

I HAVE BEEN WAITING FOR THIS VIDEO!!!

@Andrew-yu8os 2 роки тому

Hi, thank you very much for this great overview! Please keep in mind that I am very new to this topic. I do have a question about the smartthings and ring contact sensors, do they need a corresponding bridge/hub from samsung/ring or can I connect them, or maybe one of them directly over my smartphone? Thank you very much in advance for your response!

@TheDougOfTheNorth 3 роки тому

Love the channel, only recently discovered as I'm in the process of buying a house and upping my game. I'm already all in on Google WiFi and Nest doorbells and x Yale locks. With the discontinuation of the Nest Detect products, what might you suggest for door/windows sensors. Obviously, I'm hoping not to add a new hub to the mix, but understand that might be the case. Thanks!

@talhajaved5886 2 роки тому

Great video! How'd you pair the ring sensor automations? Taking out the trash and the light turning on?

@JoPaul 2 роки тому

Thanks for the detailed video. Any thoughts on Sonoff zigbee sensors?

@bobperez8414 2 роки тому

New to all of this. Great info. Keep them coming.

@---GOD--- 3 роки тому

I was literally searching smart home sensor videos last night lol good timing

@alissonfl 2 роки тому

Dude that's how google and youtube works.. You search, google knows. You talk, google listen. You think, google creates a new startup to be first.

@---GOD--- 2 роки тому

@@alissonfl He released the video hours after I searched for similar videos. You think he works for Google and UKposts? Lol.

@dempseydoodles 2 роки тому

Could you do a video on the Orro Smart Light Switch VS the Brilliant Smart Light Switch? I’m leaning more on the Orro because I’m not so keen on a camera in the Brilliant in the kids rooms…. I love how you have the intercom feature with each, and both can be used as a motion sensor (although extremely expensive). But the cost of each is pretty high. And there just is t enough videos out there to show all the feature and functions of each. Your videos are very informative and it’s just much easier to watch you inform us.

@faistime 2 роки тому

Thank you for the great video. I already have the Ring alarm (2nd Gen). Are you suggesting that I can buy additional door contacts and use them for others too though? Like it I had a ring contact in my wlak in wardrobe and set up siomething like 'if ring contact triggers, switch on my hue lights'?

@minecraftbyjacob 2 роки тому

Do you have a video showing different types of motion sensors, their patters, and coverage area? I’m interested to know exactly which ones have what and how/where they may be used for the best detection.

@howardschweitzer8847 3 роки тому

Have tried Centralite sensors? Been very happy with their performance so far and at a reasonable price.

@andrewcbartlett 3 роки тому

Great video. Same again with heat/smoke/co2 detectors and sirens please. Frient and Neo Coolcam have good ST compatible products.

@Frank004 3 роки тому

HI, love your channel help me a lot. I just added smart bulbs to my home and added smart switch all from trealife. Was looking on how to make the 2 work together. I'm using alexa.

@Matthew-lu4sf 3 роки тому

The throwing boxes at the beginning was pretty cool ngl

@LogicBob 2 роки тому

Seriously!

@kraddoomsters 3 роки тому

I'm a fan of Aqara sensors. They're tiny, cheap, fast and they're zigbee (using them with Home Assistant). The motion sensor cooldown time can be hacked from 1 min to 5 sec

@rexhua4833 3 роки тому

Great & helpful review.

@maluraq 2 роки тому

I feel like you're missing out on the joy of Insteon. I know it's old and more expensive, but their power line + wireless communication is so fast and flexible. And often no software to set up links.

@stigs1073 2 роки тому

I recommend the Fibaro sensor. Its great 👌🏻

@AlexanderLong 3 роки тому

I connected 1st gen ring contact sensors directly to SmartThings, and it works fine , plus the battery last for very long time. though First get ring sensors are huge compared to new ones

@hakeemzahardi9207 3 роки тому

This is a great review video for sensors. And nice skits

@devilsadvocate1597 3 роки тому

Great vid covering a lot of sensors! One thing though, standard glass will allow UV-A to pass through it, but almost NO UV-B or UV-C. Depending on the type of UV sensor used, it might have to be mounted outside.

@SmartHomeSolver 3 роки тому

Thanks! I tested the UV sensor with the window open and it still was a zero. I then tested it in direct sunlight and it worked but it was still very weak. I’m not sure how useful the UV sensor is for how weak it is.

@Osiris.666 Рік тому

Hi Reed thank you for your great work! I have purchased the Aqara door sensor after your recommendation. Question: can I prevent my blinds closing if the window is open or shut off my tado heating? If so how would I program that automation in homekit? Any help appreciated. Thank you, Ian

@danielwilson6323 3 роки тому

That intro was smooothhhh .... Amazing editing :)

@ronm6585 3 роки тому

Thanks Reed. Great info.

@SmartHomeSolver 3 роки тому

I appreciate it Ron!

@stephenangara1710 2 роки тому

Awesome review! Do you recall which door sensor and Motion sensor had the quickest reaction time. I’m finding with my current door sensor it does take about 10 seconds to turn on the smart down light in the same room. Thanks in advance!

@leonardobenetton3647 2 роки тому

Hi .. I love smart home projects and I also love your videos. So, I have a question. I bought an Echo Studio and did not find any information about the zigbee sensors that work with it. Do you have any videos that explain this?

@rfosnot 7 місяців тому

Hi Reid, I want to automate my outdoor lights when someone enters the property. currently I have the nest hub and automated the outside lights to go on at dusk and off at dawn. I'd like to have them only come on when someone is on the property. What would you suggest? The goal is to increase the perimeter security. Thank you --

@hj1016 2 роки тому

Great video…as usual. Do you have an opinion about the proximity and motion sensors from Lorex?

@ctlspl Рік тому

Hue for light and Aqara for windows. Best setup!

@frankvet1 2 роки тому

Love your work. Hue sensors do not show up as an option to add to my smartthings system (now that I'm trashing all the older smarthings motion sensors that go offline weekly!)

@Jimmhead 3 роки тому

I'd try the aqara motion sensor: nice design, small with a optional swivel arm, cheap and can do light and temperature. Cooldown is 2 minutes (or 5 seconds with small soldering job)

@fredwupkensoppel8949 Рік тому

The range SUCKS, though. Not a huge problem with zigbee being a mesh, but the Xiaomi devices don't pair with either Phillips Hue or Tuya routers.

@khirbz 3 роки тому

The last part is always the best part!

@natashasmith9847 3 роки тому

Right!!!

@marekklucka4407 2 роки тому

Impressed by the video and quality of the channel. Immediate sub. One question though. If I am starting to build smarter home, should I go for Zigbee or Z-Wave? You are recommending actually both of them. What are caveats of each other? What should I be looking for?

@CplcDesbiens 8 місяців тому

Hi, until you publish an updated version of this video 😉, which contact sensor do you recommend today for someone who doesn't have a hub yet and plan on using google home? Thank you in advance.

@ejbc8457 3 роки тому

Philips hue motion sensors and aqara door sensors, just what I went for 👌

@GeKo1966 3 роки тому

Hi Reed and Thanks for this great in depth review! A quick question, the multipurpose sensor from Samsung/Aeotec, will this work with any zigbee/Z-Wave Hub? I have the Nedis hub, that works really great, but their sensors does not have the same ability like the multipurpose one from Samsung/Aeotec. What you think? cause I am thinking of ordering some of them, but don´t want if they are not compatible. Not into getting yet another hug just for administrating the sensors....Thanks in advance! and keep up enLightning us!🙏💪

@dengor 2 роки тому

Great guide! What's the app you use to show all the Hue sensor data?

@aleesjaved 3 роки тому

How did you know? I was looking for smart home sensors today!

@strongblackliquor 2 роки тому

2:43 Could you please make a video explaining how you set up the virtual switch to help with the smartthings hub?

@niravniel561 3 роки тому

Hi, thanks for the video, I can also recommend you to check the aqara motions sensor, really good and not that pricy

@SmartHomeSolver 3 роки тому

Thanks Nir and I'll check those out!

@licanueto 3 роки тому

One thing I would love to see is being able to turn off the sensing part of a sensor when not using it. Like say you only care for movement at night, it would be great to be able to tell the sensor to stop looking for movement (or whatever it senses) at 8am and say at 10pm tell it to continue working. Otherwise in these use cases the sensor may be sending useless signals throughout the day, specially for high transit areas where it could potentially be sending signals as often as it's cool down period (which btw is another thing that would be great to have control of).

@rrsf4i 2 роки тому

philips hue sensor does that

@curtispazarjr4985 Рік тому

Great review!!!!!

@RestNPizza 3 роки тому

Have you tried the Aqara motion sensor? Probably the most attractive and smallest in my opinion.

@NL-Chaos Рік тому

Does it work with Alexa automatically to start routines or not ? planning on starting my smarthome when prime day hits this year.

@vaibhavarora1726 Рік тому

Great Video.. I am a newbie in the home automation. So the thing which takes up my curiosity is the knowledge about hub's. To connect the sensors mentioned in your video, do I need a hub, if yes- 1.which is the best one to use, compatible to multiple brand devices or sensors for home automation?

@nij2k 3 роки тому

Awesome mate, do you know of any sensors that can just alert you for sound, I've got an alarm system that used to use my home phone to ring my mobile if the alarm went off as it's indoors but I've got rid of the home phone so I want to just put a sensor near the alarm box so it alerts me if the alarm goes off and I'm out or in bed, it's gotta be easier than using a camera or getting a new alarm system, cheers

@TheN00bWarrior 3 роки тому

Thank you for this vid i needed more motion sensors bad haha On another note do you have any idea how to connect a Sonoff button with smart things? I get mine to connect but then cant control it its like smart things sees it but doesnt know what it is

@hazemel-kuniali6986 2 роки тому

Thank you for your great video but how can i make the speaker inform me when the door sensor opens in google nest mini (as you made in the video whenever the fridge opened)

@crgeek09 3 роки тому

Hi! Great video!! Which ones of the list of ZigBee are compatible with Amazon Alexa Zigbee hub?

@benjaminkaheel3412 3 роки тому

Can you make a video on the settings you use for your motion sensors

@DavePurz 3 роки тому

Hey Reed, I was looking at a Ring Contact Sensor 6-pack but don't have a ring alarm system. Can I pair the Ring Contact Sensors to my SmartThings hub WITHOUT the need for the Ring Alarm Base Station? Love your channel!

@JamieJSanchezSF 3 роки тому

How about a video on outdoor sensors? Besides Hue, the options seem minimal. Specifically, I'm looking for a sensor to tell me when a backyard gate or carport storage room dooe is opened. Also, an outdoor sensor that can provide a door open/close status signal would get major upvotes. FYI - I live in Palm Springs, so extra points for sensors that can stand the heat).

@GJZG 2 роки тому

Great video. Can any sensor send out the alert to remote smart phones only when there is NO movement within a period of time? say 12 hours duration. I am struggling to find one. ideally wifi sensor connecting to the home router.

@brucecowin 3 роки тому

Thanks, good video. FYI Amazon says that Ecolink sensor is unavailable.

@jasoncaro1368 2 роки тому

Appreciate your videos. Question, how can I get Alexa to tell me when a simplisafe contact sensor (I.e. front door) is open or closed? Much appreciated in advance.