Miniature Flat FOUR Nitro Engine - Assembling & Testing!
Переглядів 303,658
5 місяців тому►Stirlingkit Black Friday: bit.ly/3R5Wchv
►Get the engine here: shorturl.at/als15
►Starter kit: shorturl.at/epM35
---------------------------------------------------------------------------
Engine Specs:
FS-B400
Displacement: 14cc (3.5cc x 4)
4-Stroke
Bore: 16.68mm
Stroke: 15.40mm
Air-cooled
Lubrication Method: Mixed Oil Splash Lubrication
Electric Start
Spark Plug Type: Four-stroke F-type Glow Plug
Fuel Type: 20-25% Nitro Fuel
Weight: 1850g
Dimensions: 18.4 x 15.2 x 14.1cm
-----------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90
@Kevster270 5 місяців тому
Would be cool to see you make a split-pin crankshaft and accompanying camshafts to turn it into a proper boxer engine, so it won't shake itself to death from the crazy rocking couple caused by the shared crankpins
@gundamned4879 5 місяців тому
Flat engines are designed like that tho, thats what makes it a flat engine and not a boxer
@allenl9031 5 місяців тому
@@gundamned4879 Flat plane crank, like the Corvette Z06, which sounds awesome.
@elden4267 5 місяців тому
nop not the same thing@@allenl9031
@SoylentGamer 5 місяців тому
Well, the engine is tiny it could be a 1 can thumper and still rev to 30,000
@ethancoy9237 5 місяців тому
@@allenl9031 Yeah not quite the same there, 'flat' is referring to crankshaft setup for horizontally opposed engines, flat engines use shared crank pins for opposed pairs like a V engine, Boxer refers to those being 180 degrees apart so the pistons move opposite to each other and cancel out more of the vibrations making it smoother, both setups are still flat plane.
@halfnelson6115 5 місяців тому
That cooling fan looks so cool. Reminds me of an air cooled 911 engine.
@rileyneewton3806 5 місяців тому
love the load testing as well demonstrates its really weight carrying capacity
@NonEuclideanTacoCannon 5 місяців тому
9:58 I think it's because that belt is stretching out and the slack is getting pulled into the fan. You can see it stretching the first time it runs during revs.
@MadEvo606 5 місяців тому
but you don't really see it getting pulled into the fan, I suppose its just because of the high rpm. the pulley ratio is rather big so that fan is spinning like twice the speed of the engine
@boyorougesauvage8584 5 місяців тому
Can we expect a set of UEL headers to get that signature rumble sound ?
@callumkingunderwood 5 місяців тому
Still wouldn't sound quite right unfortunately, Subaru and VW are specifically boxer 4's. Boxers are flat, but not all flat are boxers. Boxers have the opposing pistons synchronised to reach TDC/BDC at same time as each other whereas you can see on this crankshaft the piston on the left reaches TDC at the same time as the piston on the right reaching BDC
@BIGSMOKE-bl2lq 5 місяців тому
You mean that vomit inducing sound that makes me that accepts that people have different tastes in car culture than me and respects that fucking hates with a passion
@Phrew 5 місяців тому
It won‘t rumble, it‘s a flat 4, not a boxer. Flat 4 is basically a 180 degree V, two pistons share a crankshaft pin. Boxers have a pin for each piston, which means the movement is different.
@boyorougesauvage8584 5 місяців тому
@@Phrew It will. even an inline 4 will rumble with UEL headers.
@Jaime7188 5 місяців тому
@@Phrewthat literally has nothing to do with the rumble sound caused by the unequal length of the exhaust header. The Shelby gt350 is a flat plane v8, but it doesn't sound like a flat plane v8 because they use unequal length headers.
@TheUncleRuckus 5 місяців тому
I believe the reason the fan broke is bc if you look @6:18 you can see that as you rev the engine the fan belt starts expanding quite a lot, I'm sure the belt came off the pulley and got sucked into the fan and caught between the fan blade & shroud. I miss this kind of content, while I like seeing these different engines being run its nice to see them do some work rather than just a static run test. Hoping for more videos like this in the future! 👍👍
@hugacreeper69110 5 місяців тому
This has to be one of my favorite toyan models! I own the first FS-S100A and it still runs amazing after almost 3 years.
@Weezel13 5 місяців тому
This is what i missed, doing something with these engine builds! I love watching your modifying and/or use of these engines in something other than a static display. Looking forward to "something larger is coming!"
@ichosolemanuel6048 5 місяців тому
Ikr theyre so cute especially the overhead camshaft was so small!!
@kozapytapl 5 місяців тому
i was just thinking about setting up a somewhat bright nightlight in the bedroom, h7 seems like a good idea but i didnt know how to power it without some awful power adapter. this seems to be the perfect solution, the wife's going to love it!
@produKtNZ 5 місяців тому
That is one of the best sounding engines out of the box !
@julihermes 5 місяців тому
Imagine a miniature VW Beetle with this engine, so cool
@TailSpinRCSpain 5 місяців тому
My first thoughts exactly !
@Nordlicht05 5 місяців тому
Dune Buggy with visible engine.
@wedgie502 5 місяців тому
it would be awesome if you could also get the "tweet" note out of the exhaust!
@albinklein7680 5 місяців тому
It will never be a Beetle because this is not a Boxer engine.
@wedgie502 5 місяців тому
@@albinklein7680 The boxer engine is a flat engine, belonging to the type of internal combustion engine. The engine pistons are arranged horizontally and symmetrically on each side of a central rotating crankshaft. When operating, they move continuously and in opposite directions, transfer force to the crankshaft, helping the crankshaft to move. It’s called “boxer” because the way the pistons move is like a boxer throwing punches. You have just learned something today.
@aserta 5 місяців тому
Rather than metal rings, probably would've made this work with teflon ones. It rides better, seals better, doesn't wear as much and there's never enough heat in such an engine to touch the teflon. Back in the day, it was my favorite method to make a very long term flying (endurance race) RC. Also, they keep using flat pistons, but just like the real deal, shaped heads have better ignition, heat distribution and compression.
@7.12_am 5 місяців тому
This guy is going to aquire all possible knowledge of cars and build us the ultimate RC vehicle no DIY person has done before
@liamm-c1287 5 місяців тому
Looks like the air cooled 911 look. Would be sweet to see a flat 6
@ExpressoMechanicTV 5 місяців тому
Absolutely beautiful piece of engineering.
@yahaaa1343 5 місяців тому
So hype for the coming dyna ! Thanks for the vid.
@NeoIsrafil 5 місяців тому
This thing is just the ultimate cuteness! I'd love to see you hook it up to a car or rc truck and see how competitive it is. Flat 4 and 6 engines are such runners...
@scottdoleac5651 5 місяців тому
I love these vids so much. Been watchin forever. Thanks for all the awesome content 🤘🏻🤘🏻🤘🏻
@-Deadpool8000 5 місяців тому
I wasn't expecting this a flat 4 miniature engine. This is interesting.
@mars7786 5 місяців тому
The mini motor master back at it
@sibusisosising8112 5 місяців тому
Thank you man for this awesome history about out sports. Will be waiting for for. Thanks once more
@josiahallen7538 5 місяців тому
Alright! You are making a dyno!! I love your videos!
@Vitobeatz 5 місяців тому
OMG ITS PERFECT... for a Impreza build.
@arnaldorentes5371 5 місяців тому
This little jewel would be perfect driving, for example, a Porsche 550 Spyder, the one owned by James Dean. Congratulations, it's beautiful!
@Ist02 5 місяців тому
This Chanel is amazing
@aserta 5 місяців тому
4:37 could probably make a quick and dirty C shaped cradle that goes in that gap and hugs the crank case, affixed in place with the existing leg bolt(s). From it, simple flat legs could come out that later could be engine mounts (for example). You could use the rubber isolators used for radios, test equipment (you can find them online with "vibration isolator electronics").
@jay7264 5 місяців тому
Love the generator idea. Make it so it can be used to charge a car battery then run an inverter off it so you can run stuff in an emergency
@PAINFOOL13 5 місяців тому
Thanks Johnny 👍🏻👍🏻👌🏻
@KayoMichiels 5 місяців тому
Now, combine 3 of them and build a Ferrari 312T2 around it!
@davidattenberg4720 5 місяців тому
Nice kit
@jakhazardzn9862 5 місяців тому
You have a great life Mr Q
@RoMiguens 5 місяців тому
Relly has good footage and an excellent "dyno setup" Well I sort of talked about that idea 9 months ago, in a coment I made, a bit tricky but very nice. I'm an electrician and we use dry resistant or a dry generator coupled like that set up for engine-generator tests and it's good to test temperature and horsepower/ consumption. Just need to make a conversion on the load/ Jules/power output/ time. You have charts conversions online. Very nice 👌
@benjaminmathon7417 5 місяців тому
Good call on trying to find out power output, you can always improve it in the future, with big resistor for exemple and trying to find out the efficiency of the system On the Toyan FS-L400, same number of cylinder, fuel and displacement, they give the power output of 3.05hp, so 2200 watts... yeah, right...
@turboinferno95 5 місяців тому
C'est juste magnifique
@johnmclaughlin1804 5 місяців тому
What were the engine temps like with the fan cooled engine?
@Med1na2012 5 місяців тому
That’s awesome! But the single rotor rotary engine spins at over 30,000 rpm.. imagine a miniature 4 rotor!
@HakkiOgrt 5 місяців тому
You have videos like therapy
@biggestthreattoyourexistence 5 місяців тому
soo much torque
@user-lr8lp2kv5m 5 місяців тому
Круто !!! Мне нравятся оппозитные моторы !!! Есть в них что-то такое.... Думал опять какая-нибудь пневматическая игрушка, но оказалось что нет. Нормальный мотор !
@microbuilder 5 місяців тому
Hey if you didnt see it, on the Adam Savage Tested channel, they recently went to a makers fair and were showing some pretty amazing little engines.
@evilbeetlekustomscreations4965 5 місяців тому
😮😮😮 I know what I want for Christmas
@ThePontiacgto65 5 місяців тому
It's really the brand that best manufactures its production, offering excellent value for money.
@silveroil1780 5 місяців тому
Nice Boxxer Engine.🤩
@RailsofForney 5 місяців тому
9:58 Something “hit the fan” whilst showing off 😂
@mikel5571 5 місяців тому
I was just thinking about your audience. Probably us who actually enjoy building things, engines. Cool so see such a tiny thing work.
@blaineburgess 5 місяців тому
Those torque click shots are what i’m really here to see.
@egoalter8745 5 місяців тому
This is very cool video and engine.
@theswissvaper 5 місяців тому
It's like Christmas, Birthday, Easter, Thanksgiving, Halloween together.. Can't wait until you upload a new video 🤪🤪🤪 Greetings from the Swiss Alps 🤪🤣🤘
@AlexBazs 5 місяців тому
Hey, I have been wondering all these videos, what torque screwdriver are you using?
@robm.6825 3 місяці тому
Great videos. Would you post a link to the tools you use please? Thanks! Most interested in the cordless screwdriver and torque screwdriver.
@jongonegone1262 5 місяців тому
gotta put that in a 1980 aircooled porsche 911 rc model. nice build.
@Thunderbolt1978 5 місяців тому
What brand of torque wrenches do you use ? thanks
@Patrik2166 5 місяців тому
Hmmmmmmmm a nice Porche build with this engine would be stunning O.O
@starpuss 5 місяців тому
Would be GREAT to install in an Vintage Vw Buggy RC Car!!!
@johnh8615 5 місяців тому
Yeah I noticed when you put the timing belt on after tightening it the crank mark was out by one tooth. 3:57 it moves after tightening it
@fyrbyrd71 5 місяців тому
Yep. Watching in .25 speed @ 4:00-:03, the cams both move with "left" cam moving the most. The timing marks should be more precisely located and indicated so all builders can get valve timing right the first time.
@menom7 5 місяців тому
Cool hook-up to the wattage meter!!! Love ALL your videos!!! : >)
@jean-charlesweyland129 5 місяців тому
I'm currently rebuilding my Lancia Gamma engine... this looks oddly familiar ^^
@andrewanderson5297 5 місяців тому
Today's a better day now, JohnnyQ90 fix, time to build a Subaru WRX Monster with that flat four.
@kakswell 5 місяців тому
Love the primitive dyno I wanna see upgrades and retesting!!
@realbogus 5 місяців тому
Assembly time? Looks so cool!!
@ERKNEES2 5 місяців тому
Sound so siiick
@Mr.Bearded.Mechanic 5 місяців тому
Wish it was a TRUE Flat 4 = Boxer engine. It is 'just' a 180° V4, sounds like it too. Thanks for sharing!
@croccofanto 5 місяців тому
i rely miss seeing you mod RC cars
@luaynomad3162 5 місяців тому
i had it hard all the time please explain : why don't you put some cream on them head pad first before mounting every head?
@MikeHarris1984 5 місяців тому
That is so crazy... those piston rings tho... does the gap close up? they seamed to have an awefully big gap in them... So amazing how it is a REAL ICE and has a lot of the exact same componants, just shrunk down!!! I get so amazing watching these and would love to own a bunch of these myelf, but this would be a hobby that got out of control and my wife would kill me for spending that kind of money on a small engine, LOL.
@volksdude1970 5 місяців тому
I was trying to figure out whether this was a VW style boxer, or the "modern" Subaru boxer style. After seeing the overhead cams, I'm thinking the model designers decided to take a bit of both and build a Frankenstein engine of the two. It's "technically" an air-cooled Subaru, but I could be wrong.
@collectorguy3919 5 місяців тому
Where do you buy the aluminum extrusions?
@theslayer808 5 місяців тому
Are there any upcoming videos for the 1/5 car?
@shredder8910 5 місяців тому
Too bad it's not a boxer
@DavidGragg82 5 місяців тому
How is it not?
@dantevito1193 5 місяців тому
@@DavidGragg82cylinders are not opposed. It's a flat 4, not a boxer 4
@shredder8910 5 місяців тому
@@dantevito1193 yep telltale sign is that a boxer doesn’t share crank pins
@Delzra 5 місяців тому
the opposing pistons always move to another or away from another. the crankshaft would look a lot different. this here is the same as a V engine, only not at 60° or so, but at 180°@@DavidGragg82
@badsneeze 3 місяці тому
Naw man why would you wanna have to deal with a blown head gasket on your model engine 😂
@dexikcz 5 місяців тому
how do you transfering the power from engine to the bulb? Could anyone please explain me where do you put the cables or full tutorial? Thank youuu
@gagan_jit7897 5 місяців тому
What if we give electric current to glow plugs only on one side ? Will it work ? Or it may sound different?
@AdeReeves 5 місяців тому
The level of detail on these components is staggering ..
@stug77 5 місяців тому
What torque wrench do you use and do you like it?
@keeganplayz1875 5 місяців тому
Mini subaru RC car possibly???? Subarus are my favorite and I'd love to see tiny little UEL headers.
@deepVAroots 5 місяців тому
What brand of transmitter are you using??
@kalicliq4365 5 місяців тому
Would you be capable of making a mini turbo to test if the reaction is the same as full scale ? and test it on other engine not only this one.
@buildingracingvideos4714 6 днів тому
That crank makes it a 180° v4
@richsilv 5 місяців тому
What is that little torque wrench you use?
@jesperlehmann4336 5 місяців тому
Ypu should build a Race car of your own choice, with one of your engines.. maybe a v12 👍 And to top it off, make a Hybrid system to the car.. would be so amazing 💪 keep up the good work man 💪👍
@piegros 5 місяців тому
Good video
@aayrasaraswati6087 5 місяців тому
Can you use the fans as a supercharger?
@southernstar4353 5 місяців тому
looks more like a boxer engine, very very cool!
@bitesizegamer301 5 місяців тому
When I saw the title, I was thinking that it would be a subaru type boxer engine, but no, because the crankshaft is different.
@matthewshort4780 5 місяців тому
As an STI owner, I approve.
@currymejesus4206 5 місяців тому
Sadly it’s a flat four (like a flat V essentially) not a boxer 4 like a subaru due to the shared crank connection. You would have noticed that opposing pistons reach TDC/BDC at the same time respectively so you’d get pistons 1&3, 2&4 firing in sync rather than in an order like a subaru
@TumzDK 5 місяців тому
180˚ V4... I’m still waiting for the miniature NR engine 😊
@matthewshort4780 5 місяців тому
@@currymejesus4206 oohh i didnt know that!! thanks for pointing it out!!
@matthewshort4780 5 місяців тому
@@TumzDK ahhh ok thx, you'd think I'd know the difference lol.
@abdullahjadoon8363 5 місяців тому
I have suggestion/request. I think that building a ship with a real miniature engine would be a very interesting idea. It might not be possible due to some reasons. It might be out of your area of expertise, not the right parts available, project would take too long or wouldn’t be an interesting build but I thought it might be worth sharing.
@troymonroe9656 5 місяців тому
Time to build a sand rail 😁
@CmmdrKitty 5 місяців тому
I just ran mine through a 3rd tank. This engine is amazing when the carbs are set right! Beautiful engine too! Though yer two cam dots faced down and it still ran. Mine were faced straight up. And it ran. This is weird.
@albinklein7680 5 місяців тому
It will almost always run because it needs no spark timing due to the glow plugs.
@CmmdrKitty 5 місяців тому
@@albinklein7680 yeah I know. Not my only nitro engine I've had. Mainly focused on valve timing. As those do need to open at a set time
@DBicakci 5 місяців тому
i wonder the way to make sure all the plugs were working in a multiple system
@rivermutant4190 5 місяців тому
What kind of RC model would you run a motor like this?
@ConnerW. 5 місяців тому
These companies that make these engines should make a little diesel one that would be cool
@bigmesstest230 5 місяців тому
Can you just use diesel fuel with 2cycle oil as I runs off of glow plugs the same as a diesel
@OdyKaz-wk3du 5 місяців тому
Κάθε ένας κινητήρας και πιο όμορφος....!
@j__r0d 5 місяців тому
man, I could power my Steamdeck with this thing!
@WRCDMB 5 місяців тому
I Honestly been waiting for a boxer style miniature engine to be released, now my wife gonna yell at me in a few weeks 😂 (Please make an unequal length EJ header and maybe a catback exhaust, make it sound more like a Subaru boxer that would be epic)
@NotYeatle 4 місяці тому
It’s not a boxer motor. It’s a flat 4.
@user-ok8qp8dk1m 5 місяців тому
Can you make a 1/5th scale vw bug?
@eyyy1933 5 місяців тому
We need some cam adjustment so its firing a tad bit more early so it rumbles on idle
@waybous 5 місяців тому
Now imagine making a scale size sand rail with this in it.
@VctordeMoraes2010 3 місяці тому
Porque vc não tenta usar dois anéis com lados opostos nos pistões pra melhorar a vedação dos cilindros.
@MDBenson 5 місяців тому
That was funny 😂 I do wanna see you tear the engine down though. Another one to try and kill the engine stand with 😅
@andrewlarson9293 5 місяців тому
Does it have head gasket issues,
Ми - Україна
Переглядів 610 тис.
The Engineers Post
Переглядів 323 тис.
Vintwatches
Переглядів 101 тис.